Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1640716 > unrolled thread

Re: [PATCH 3.18 00/39] 3.18.53-stable review

Started byGuenter Roeck <linux@roeck-us.net>
First post2017-05-12 21:50 +0200
Last post2017-05-15 08:20 +0200
Articles 6 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 3.18 00/39] 3.18.53-stable review Guenter Roeck <linux@roeck-us.net> - 2017-05-12 21:50 +0200
    Re: [PATCH 3.18 00/39] 3.18.53-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-05-14 13:00 +0200
      Re: [PATCH 3.18 00/39] 3.18.53-stable review Guenter Roeck <linux@roeck-us.net> - 2017-05-14 16:10 +0200
        Re: [PATCH 3.18 00/39] 3.18.53-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-05-14 23:00 +0200
          Re: [PATCH 3.18 00/39] 3.18.53-stable review Guenter Roeck <linux@roeck-us.net> - 2017-05-15 01:40 +0200
            Re: [PATCH 3.18 00/39] 3.18.53-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-05-15 08:20 +0200

#1640716 — Re: [PATCH 3.18 00/39] 3.18.53-stable review

FromGuenter Roeck <linux@roeck-us.net>
Date2017-05-12 21:50 +0200
SubjectRe: [PATCH 3.18 00/39] 3.18.53-stable review
Message-ID<tGoJA-YD-9@gated-at.bofh.it>
On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.53 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 13 13:02:15 UTC 2017.
> Anything received after that time might be too late.
> 
[ This is with v3.18.52-39-g710739d ]

Build results:
	total: 136 pass: 134 fail: 2
Failed builds:
	arm:allmodconfig
	arm:omap2plus_defconfig
Qemu test results:
	total: 111 pass: 96 fail: 15
Failed tests:
	arm:beagle:multi_v7_defconfig:omap3-beagle
	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
	arm:overo:multi_v7_defconfig:omap3-overo-tobi
	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
	arm:midway:multi_v7_defconfig:ecx-2000
	arm:beagle:omap2plus_defconfig:omap3-beagle
	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
	arm:overo:omap2plus_defconfig:omap3-overo-tobi
	powerpc:g3beige:nosmp:ppc_book3s_defconfig

Failure is still

arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'

as reported earlier.

Details are available at http://kerneltests.org/builders.

Guenter

[toc] | [next] | [standalone]

#1641068

FromGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Date2017-05-14 13:00 +0200
Message-ID<tGZpL-xD-5@gated-at.bofh.it>
In reply to#1640716
On Fri, May 12, 2017 at 12:47:38PM -0700, Guenter Roeck wrote:
> On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.53 release.
> > There are 39 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat May 13 13:02:15 UTC 2017.
> > Anything received after that time might be too late.
> > 
> [ This is with v3.18.52-39-g710739d ]
> 
> Build results:
> 	total: 136 pass: 134 fail: 2
> Failed builds:
> 	arm:allmodconfig
> 	arm:omap2plus_defconfig
> Qemu test results:
> 	total: 111 pass: 96 fail: 15
> Failed tests:
> 	arm:beagle:multi_v7_defconfig:omap3-beagle
> 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
> 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
> 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
> 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
> 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
> 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
> 	arm:midway:multi_v7_defconfig:ecx-2000
> 	arm:beagle:omap2plus_defconfig:omap3-beagle
> 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
> 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
> 	powerpc:g3beige:nosmp:ppc_book3s_defconfig
> 
> Failure is still
> 
> arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
> arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'
> 
> as reported earlier.

Ugh, I dropped the wrong arm patch from my queue :(

Ok, I think I've fixed it up now...

thanks,

greg k-h

[toc] | [prev] | [next] | [standalone]

#1641093

FromGuenter Roeck <linux@roeck-us.net>
Date2017-05-14 16:10 +0200
Message-ID<tH2nD-2yc-3@gated-at.bofh.it>
In reply to#1641068
On 05/14/2017 03:56 AM, Greg Kroah-Hartman wrote:
> On Fri, May 12, 2017 at 12:47:38PM -0700, Guenter Roeck wrote:
>> On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 3.18.53 release.
>>> There are 39 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sat May 13 13:02:15 UTC 2017.
>>> Anything received after that time might be too late.
>>>
>> [ This is with v3.18.52-39-g710739d ]
>>
>> Build results:
>> 	total: 136 pass: 134 fail: 2
>> Failed builds:
>> 	arm:allmodconfig
>> 	arm:omap2plus_defconfig
>> Qemu test results:
>> 	total: 111 pass: 96 fail: 15
>> Failed tests:
>> 	arm:beagle:multi_v7_defconfig:omap3-beagle
>> 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
>> 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
>> 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
>> 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
>> 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
>> 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
>> 	arm:midway:multi_v7_defconfig:ecx-2000
>> 	arm:beagle:omap2plus_defconfig:omap3-beagle
>> 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
>> 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
>> 	powerpc:g3beige:nosmp:ppc_book3s_defconfig
>>
>> Failure is still
>>
>> arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
>> arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'
>>
>> as reported earlier.
>
> Ugh, I dropped the wrong arm patch from my queue :(
>
> Ok, I think I've fixed it up now...
>

Maybe I am confused, and/or it is still too early, but linux-3.18.y in
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
now points to v3.18.52, ie the old version.

Guenter

[toc] | [prev] | [next] | [standalone]

#1641217

FromGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Date2017-05-14 23:00 +0200
Message-ID<tH8Mp-6zv-7@gated-at.bofh.it>
In reply to#1641093
On Sun, May 14, 2017 at 07:02:43AM -0700, Guenter Roeck wrote:
> On 05/14/2017 03:56 AM, Greg Kroah-Hartman wrote:
> > On Fri, May 12, 2017 at 12:47:38PM -0700, Guenter Roeck wrote:
> > > On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 3.18.53 release.
> > > > There are 39 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sat May 13 13:02:15 UTC 2017.
> > > > Anything received after that time might be too late.
> > > > 
> > > [ This is with v3.18.52-39-g710739d ]
> > > 
> > > Build results:
> > > 	total: 136 pass: 134 fail: 2
> > > Failed builds:
> > > 	arm:allmodconfig
> > > 	arm:omap2plus_defconfig
> > > Qemu test results:
> > > 	total: 111 pass: 96 fail: 15
> > > Failed tests:
> > > 	arm:beagle:multi_v7_defconfig:omap3-beagle
> > > 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
> > > 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
> > > 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
> > > 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
> > > 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
> > > 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
> > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
> > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
> > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
> > > 	arm:midway:multi_v7_defconfig:ecx-2000
> > > 	arm:beagle:omap2plus_defconfig:omap3-beagle
> > > 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
> > > 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
> > > 	powerpc:g3beige:nosmp:ppc_book3s_defconfig
> > > 
> > > Failure is still
> > > 
> > > arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
> > > arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'
> > > 
> > > as reported earlier.
> > 
> > Ugh, I dropped the wrong arm patch from my queue :(
> > 
> > Ok, I think I've fixed it up now...
> > 
> 
> Maybe I am confused, and/or it is still too early, but linux-3.18.y in
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> now points to v3.18.52, ie the old version.

Nope, I blew away the old -rc releases when I updated the new stable
releases, sorry about that.  The 3.18.y branch should now have the -rc1
series in it.

thanks,

greg k-h

[toc] | [prev] | [next] | [standalone]

#1641227

FromGuenter Roeck <linux@roeck-us.net>
Date2017-05-15 01:40 +0200
Message-ID<tHbhf-8tb-1@gated-at.bofh.it>
In reply to#1641217
On 05/14/2017 01:58 PM, Greg Kroah-Hartman wrote:
> On Sun, May 14, 2017 at 07:02:43AM -0700, Guenter Roeck wrote:
>> On 05/14/2017 03:56 AM, Greg Kroah-Hartman wrote:
>>> On Fri, May 12, 2017 at 12:47:38PM -0700, Guenter Roeck wrote:
>>>> On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
>>>>> This is the start of the stable review cycle for the 3.18.53 release.
>>>>> There are 39 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Sat May 13 13:02:15 UTC 2017.
>>>>> Anything received after that time might be too late.
>>>>>
>>>> [ This is with v3.18.52-39-g710739d ]
>>>>
>>>> Build results:
>>>> 	total: 136 pass: 134 fail: 2
>>>> Failed builds:
>>>> 	arm:allmodconfig
>>>> 	arm:omap2plus_defconfig
>>>> Qemu test results:
>>>> 	total: 111 pass: 96 fail: 15
>>>> Failed tests:
>>>> 	arm:beagle:multi_v7_defconfig:omap3-beagle
>>>> 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
>>>> 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
>>>> 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
>>>> 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
>>>> 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
>>>> 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
>>>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
>>>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
>>>> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
>>>> 	arm:midway:multi_v7_defconfig:ecx-2000
>>>> 	arm:beagle:omap2plus_defconfig:omap3-beagle
>>>> 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
>>>> 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
>>>> 	powerpc:g3beige:nosmp:ppc_book3s_defconfig
>>>>
>>>> Failure is still
>>>>
>>>> arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
>>>> arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'
>>>>
>>>> as reported earlier.
>>>
>>> Ugh, I dropped the wrong arm patch from my queue :(
>>>
>>> Ok, I think I've fixed it up now...
>>>
>>
>> Maybe I am confused, and/or it is still too early, but linux-3.18.y in
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> now points to v3.18.52, ie the old version.
>
> Nope, I blew away the old -rc releases when I updated the new stable
> releases, sorry about that.  The 3.18.y branch should now have the -rc1
> series in it.
>

Confirmed. For v3.18.52-37-gf15fc0e:

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 111 pass: 111 fail: 0

Thanks,
Guenter

[toc] | [prev] | [next] | [standalone]

#1641299

FromGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Date2017-05-15 08:20 +0200
Message-ID<tHhwl-4kQ-5@gated-at.bofh.it>
In reply to#1641227
On Sun, May 14, 2017 at 04:38:09PM -0700, Guenter Roeck wrote:
> On 05/14/2017 01:58 PM, Greg Kroah-Hartman wrote:
> > On Sun, May 14, 2017 at 07:02:43AM -0700, Guenter Roeck wrote:
> > > On 05/14/2017 03:56 AM, Greg Kroah-Hartman wrote:
> > > > On Fri, May 12, 2017 at 12:47:38PM -0700, Guenter Roeck wrote:
> > > > > On Thu, May 11, 2017 at 03:02:35PM +0200, Greg Kroah-Hartman wrote:
> > > > > > This is the start of the stable review cycle for the 3.18.53 release.
> > > > > > There are 39 patches in this series, all will be posted as a response
> > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > > 
> > > > > > Responses should be made by Sat May 13 13:02:15 UTC 2017.
> > > > > > Anything received after that time might be too late.
> > > > > > 
> > > > > [ This is with v3.18.52-39-g710739d ]
> > > > > 
> > > > > Build results:
> > > > > 	total: 136 pass: 134 fail: 2
> > > > > Failed builds:
> > > > > 	arm:allmodconfig
> > > > > 	arm:omap2plus_defconfig
> > > > > Qemu test results:
> > > > > 	total: 111 pass: 96 fail: 15
> > > > > Failed tests:
> > > > > 	arm:beagle:multi_v7_defconfig:omap3-beagle
> > > > > 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
> > > > > 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
> > > > > 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
> > > > > 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
> > > > > 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
> > > > > 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
> > > > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
> > > > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
> > > > > 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
> > > > > 	arm:midway:multi_v7_defconfig:ecx-2000
> > > > > 	arm:beagle:omap2plus_defconfig:omap3-beagle
> > > > > 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
> > > > > 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
> > > > > 	powerpc:g3beige:nosmp:ppc_book3s_defconfig
> > > > > 
> > > > > Failure is still
> > > > > 
> > > > > arch/arm/mach-omap2/omap-headsmp.S: Assembler messages:
> > > > > arch/arm/mach-omap2/omap-headsmp.S:60: Error: bad instruction `badr r0,hyp_boot'
> > > > > 
> > > > > as reported earlier.
> > > > 
> > > > Ugh, I dropped the wrong arm patch from my queue :(
> > > > 
> > > > Ok, I think I've fixed it up now...
> > > > 
> > > 
> > > Maybe I am confused, and/or it is still too early, but linux-3.18.y in
> > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > now points to v3.18.52, ie the old version.
> > 
> > Nope, I blew away the old -rc releases when I updated the new stable
> > releases, sorry about that.  The 3.18.y branch should now have the -rc1
> > series in it.
> > 
> 
> Confirmed. For v3.18.52-37-gf15fc0e:
> 
> Build results:
> 	total: 136 pass: 136 fail: 0
> Qemu test results:
> 	total: 111 pass: 111 fail: 0

Ah, thanks for letting me know, sorry for getting this wrong the last
time.

greg k-h

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web