Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1639776 > unrolled thread

[PATCH 4.10 034/129] ARM: dts: imx6sx-udoo-neo: Fix reboot hang

Started byGreg Kroah-Hartman <gregkh@linuxfoundation.org>
First post2017-05-11 17:50 +0200
Last post2017-05-11 17:50 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 4.10 034/129] ARM: dts: imx6sx-udoo-neo: Fix reboot hang Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-05-11 17:50 +0200

#1639776 — [PATCH 4.10 034/129] ARM: dts: imx6sx-udoo-neo: Fix reboot hang

FromGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Date2017-05-11 17:50 +0200
Subject[PATCH 4.10 034/129] ARM: dts: imx6sx-udoo-neo: Fix reboot hang
Message-ID<tFYvN-8cz-59@gated-at.bofh.it>
4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@nxp.com>

commit 12aff99723901bcc0e2a6a34343a4f62c371fdd9 upstream.

After issuing a 'reboot' command the imx6sx-udoo-neo board does not
reboot as expected and it just hangs instead.

In mainline kernel only LDO enabled mode is supported. Do not provide
arm-supply/soc-supply nodes in the device tree, so that the board operates
in LDO enabled mode and can then successfully reboot via watchdog.

Fixes: 76e691fc7653b85d39 ("ARM: dts: imx6sx: Add UDOO Neo support")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi |    5 -----
 1 file changed, 5 deletions(-)

--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -77,11 +77,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web