Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1639769 > unrolled thread

[PATCH 4.10 037/129] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

Started byGreg Kroah-Hartman <gregkh@linuxfoundation.org>
First post2017-05-11 17:50 +0200
Last post2017-05-11 17:50 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 4.10 037/129] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-05-11 17:50 +0200

#1639769 — [PATCH 4.10 037/129] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

FromGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Date2017-05-11 17:50 +0200
Subject[PATCH 4.10 037/129] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
Message-ID<tFYvM-8cz-35@gated-at.bofh.it>
4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sekhar Nori <nsekhar@ti.com>

commit f5432f01240ef69a391940d623b6a51768aefd65 upstream.

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial
output support") added the TPIC2810 device-tree node under
SPI bus instead of I2C1.

Fix it. Tested on AM572x IDK by driving on-board LEDs
connected to TPIC2810

Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/am57xx-idk-common.dtsi |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -311,6 +311,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {
@@ -326,13 +333,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web