Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1639450 > unrolled thread
| Started by | Quentin Schulz <quentin.schulz@free-electrons.com> |
|---|---|
| First post | 2017-05-11 15:50 +0200 |
| Last post | 2017-05-11 15:50 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 1/4] power: supply: axp20x_battery: add support for DT battery Quentin Schulz <quentin.schulz@free-electrons.com> - 2017-05-11 15:50 +0200
| From | Quentin Schulz <quentin.schulz@free-electrons.com> |
|---|---|
| Date | 2017-05-11 15:50 +0200 |
| Subject | [PATCH 1/4] power: supply: axp20x_battery: add support for DT battery |
| Message-ID | <tFWDD-6V6-9@gated-at.bofh.it> |
This adds support in X-Powers AXP20X and AXP22X battery driver for a
fixed battery in DT.
It will take the minimum supported voltage by the battery as defined in
the battery DT node and set the V_OFF register to this value, telling
the system to shut down if the supplied power is below this value.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
drivers/power/supply/axp20x_battery.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index 5d29b2eab8fc..66f530541735 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -433,6 +433,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
{
struct axp20x_batt_ps *axp20x_batt;
struct power_supply_config psy_cfg = {};
+ struct power_supply_battery_info info;
if (!of_device_is_available(pdev->dev.of_node))
return -ENODEV;
@@ -484,6 +485,15 @@ static int axp20x_power_probe(struct platform_device *pdev)
return PTR_ERR(axp20x_batt->batt);
}
+ if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
+ int vmin = info.voltage_min_design_uv;
+
+ if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
+ vmin))
+ dev_err(&pdev->dev,
+ "couldn't set voltage_min_design\n");
+ }
+
return 0;
}
--
2.11.0
Back to top | Article view | linux.kernel
csiph-web