Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1637967 > unrolled thread
| Started by | Phil Elwell <phil@raspberrypi.org> |
|---|---|
| First post | 2017-05-09 10:30 +0200 |
| Last post | 2017-05-09 11:10 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH] ARM: dts: bcm283x: Reserve first page for firmware Phil Elwell <phil@raspberrypi.org> - 2017-05-09 10:30 +0200
Re: [PATCH] ARM: dts: bcm283x: Reserve first page for firmware Stefan Wahren <stefan.wahren@i2se.com> - 2017-05-09 11:10 +0200
| From | Phil Elwell <phil@raspberrypi.org> |
|---|---|
| Date | 2017-05-09 10:30 +0200 |
| Subject | [PATCH] ARM: dts: bcm283x: Reserve first page for firmware |
| Message-ID | <tF8GR-7BJ-3@gated-at.bofh.it> |
The Raspberry Pi startup stub files for multi-core BCM283X processors make the secondary CPUs spin until the corresponding mailbox is written. These stubs are loaded at physical address 0x00000xxx (as seen by the ARMs), but this page will be reused by the kernel unless it is explicitly reserved, causing the waiting cores to execute random code. Use the /memreserve/ Device Tree directive to mark the first page as off-limits to the kernel. See: https://github.com/raspberrypi/linux/issues/1989 Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ---- arch/arm/boot/dts/bcm283x.dtsi | 2 ++ 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts index b21d286..cbec919 100644 --- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts @@ -1,9 +1,5 @@ /dts-v1/; -#ifdef RPI364 -/memreserve/ 0x00000000 0x00001000; -#endif - #include "bcm2710.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 7d58cd7..0bc1932 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -3,6 +3,8 @@ #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> +/memreserve/ 0x00000000 0x00001000; + /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to * bcm2835.dtsi and bcm2836.dtsi. -- 1.9.1
[toc] | [next] | [standalone]
| From | Stefan Wahren <stefan.wahren@i2se.com> |
|---|---|
| Date | 2017-05-09 11:10 +0200 |
| Message-ID | <tF9jA-89r-21@gated-at.bofh.it> |
| In reply to | #1637967 |
Hi Phil, Am 09.05.2017 um 10:20 schrieb Phil Elwell: > The Raspberry Pi startup stub files for multi-core BCM283X processors > make the secondary CPUs spin until the corresponding mailbox is > written. These stubs are loaded at physical address 0x00000xxx (as seen > by the ARMs), but this page will be reused by the kernel unless it is > explicitly reserved, causing the waiting cores to execute random code. > > Use the /memreserve/ Device Tree directive to mark the first page as > off-limits to the kernel. > > See: https://github.com/raspberrypi/linux/issues/1989 > > Signed-off-by: Phil Elwell <phil@raspberrypi.org> > --- > arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ---- could you please rebase your patch on a upstream tree (e.g. linux-next)? There has never been such a file. > arch/arm/boot/dts/bcm283x.dtsi | 2 ++ > 2 files changed, 2 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts > index b21d286..cbec919 100644 > --- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts > +++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts > @@ -1,9 +1,5 @@ > /dts-v1/; > > -#ifdef RPI364 > -/memreserve/ 0x00000000 0x00001000; > -#endif > - > #include "bcm2710.dtsi" > #include "bcm283x-rpi-smsc9514.dtsi" > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > index 7d58cd7..0bc1932 100644 > --- a/arch/arm/boot/dts/bcm283x.dtsi > +++ b/arch/arm/boot/dts/bcm283x.dtsi > @@ -3,6 +3,8 @@ > #include <dt-bindings/clock/bcm2835-aux.h> > #include <dt-bindings/gpio/gpio.h> > > +/memreserve/ 0x00000000 0x00001000; > + Would be nice to have a short comment within the dtsi file explaining what this reserve contains. Thanks Stefan > /* This include file covers the common peripherals and configuration between > * bcm2835 and bcm2836 implementations, leaving the CPU configuration to > * bcm2835.dtsi and bcm2836.dtsi.
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web