Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1637034 > unrolled thread

[PATCH 3/4] s390/sysinfo: Replace six seq_printf() calls by seq_puts()

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3/4] s390/sysinfo: Replace six seq_printf() calls by  seq_puts() SF Markus Elfring <elfring@users.sourceforge.net> - 2017-05-07 23:50 +0200

#1637034 — [PATCH 3/4] s390/sysinfo: Replace six seq_printf() calls by seq_puts()

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 7 May 2017 18:18:45 +0200

Six strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 arch/s390/kernel/sysinfo.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index eefcb54872a5..e7061fcd047a 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -139,13 +139,13 @@ static void stsi_15_1_x(struct seq_file *m, struct sysinfo_15_1_x *info)
 		return;
 	if (stsi(info, 15, 1, topology_max_mnest))
 		return;
-	seq_printf(m, "CPU Topology HW:     ");
+	seq_puts(m, "CPU Topology HW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		seq_printf(m, " %d", info->mag[i]);
 	seq_putc(m, '\n');
 #ifdef CONFIG_SCHED_TOPOLOGY
 	store_topology(info);
-	seq_printf(m, "CPU Topology SW:     ");
+	seq_puts(m, "CPU Topology SW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		seq_printf(m, " %d", info->mag[i]);
 	seq_putc(m, '\n');
@@ -202,13 +202,13 @@ static void stsi_2_2_2(struct seq_file *m, struct sysinfo_2_2_2 *info)
 	EBCASC(info->name, sizeof(info->name));
 	seq_putc(m, '\n');
 	seq_printf(m, "LPAR Number:          %d\n", info->lpar_number);
-	seq_printf(m, "LPAR Characteristics: ");
+	seq_puts(m, "LPAR Characteristics: ");
 	if (info->characteristics & LPAR_CHAR_DEDICATED)
-		seq_printf(m, "Dedicated ");
+		seq_puts(m, "Dedicated ");
 	if (info->characteristics & LPAR_CHAR_SHARED)
-		seq_printf(m, "Shared ");
+		seq_puts(m, "Shared ");
 	if (info->characteristics & LPAR_CHAR_LIMITED)
-		seq_printf(m, "Limited ");
+		seq_puts(m, "Limited ");
 	seq_putc(m, '\n');
 	seq_printf(m, "LPAR Name:            %-8.8s\n", info->name);
 	seq_printf(m, "LPAR Adjustment:      %d\n", info->caf);
-- 
2.12.2

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web