Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1634682 > unrolled thread

[RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing

Started byChris Packham <chris.packham@alliedtelesis.co.nz>
First post2017-05-03 02:50 +0200
Last post2017-05-04 03:30 +0200
Articles 4 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing Chris Packham <chris.packham@alliedtelesis.co.nz> - 2017-05-03 02:50 +0200
    Re: [RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing Chris Packham <Chris.Packham@alliedtelesis.co.nz> - 2017-05-03 10:20 +0200
    Re: [RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing Guenter Roeck <linux@roeck-us.net> - 2017-05-03 18:40 +0200
      Re: [RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing Chris Packham <Chris.Packham@alliedtelesis.co.nz> - 2017-05-04 03:30 +0200

#1634682 — [RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing

FromChris Packham <chris.packham@alliedtelesis.co.nz>
Date2017-05-03 02:50 +0200
Subject[RFC PATCH v2 3/3] hwmon: (adt7475) temperature smoothing
Message-ID<tCQEp-5rw-5@gated-at.bofh.it>
When enabled temperature smoothing allows ramping the fan speed over a
configurable period of time instead of jumping to the new speed
instantaneously.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v2:
- use a single tempN_smoothing attribute

 Documentation/hwmon/adt7475 |  4 ++
 drivers/hwmon/adt7475.c     | 99 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)

diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index 63507402cd4f..dd6433d819d0 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -114,6 +114,10 @@ minimum (i.e. auto_point1_pwm). This behaviour be configured using the
 pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
 A value of 1 means the fans will run at auto_point1_pwm.
 
+The responsiveness of the ADT747x to temperature changes can be configured.
+This allows smoothing of the fan speed transition. To set the transition time
+set the value in ms in the temp[1-*]_smoothing sysfs attribute.
+
 Notes
 -----
 
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 85957324cd85..41342de6e20c 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -526,6 +526,96 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+/* Assuming CONFIG6[SLOW] is 0 */
+static const int ad7475_st_map[] = {
+	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
+};
+
+static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
+				  char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int shift, idx;
+	long val;
+
+	switch (sattr->index) {
+	case 0:
+		shift = 0;
+		idx = 0;
+		break;
+	case 1:
+		shift = 4;
+		idx = 1;
+		break;
+	case 2:
+		shift = 0;
+		idx = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = data->enh_acou[idx] >> shift;
+	if (val & 0x8) {
+		return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
+	} else {
+		return sprintf(buf, "0\n");
+	}
+}
+
+static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg;
+	int shift, idx;
+	ulong val;
+
+	if (kstrtoul(buf, 10, &val))
+		return -EINVAL;
+
+	switch (sattr->index) {
+	case 0:
+		reg = REG_ENHANCE_ACOUSTICS1;
+		shift = 0;
+		idx = 0;
+		break;
+	case 1:
+		reg = REG_ENHANCE_ACOUSTICS2;
+		shift = 4;
+		idx = 1;
+		break;
+	case 2:
+		reg = REG_ENHANCE_ACOUSTICS2;
+		shift = 0;
+		idx = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val > 0) {
+		val = find_closest_descending(val, ad7475_st_map,
+					      ARRAY_SIZE(ad7475_st_map));
+		val |= 0x8;
+	}
+
+	mutex_lock(&data->lock);
+
+	data->enh_acou[idx] &= ~(0xf << shift);
+	data->enh_acou[idx] |= (val << shift);
+
+	i2c_smbus_write_byte_data(client, reg, data->enh_acou[idx]);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
 /*
  * Table of autorange values - the user will write the value in millidegrees,
  * and we'll convert it
@@ -1008,6 +1098,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 0);
 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
@@ -1024,6 +1116,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 1);
 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
@@ -1041,6 +1135,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    THERM, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 			    set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
+			    set_temp_st, 0, 2);
 static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
 			    MIN, 0);
@@ -1125,6 +1221,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -1134,6 +1231,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
@@ -1144,6 +1242,7 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
-- 
2.11.0.24.ge6920cf

[toc] | [next] | [standalone]

#1634796

FromChris Packham <Chris.Packham@alliedtelesis.co.nz>
Date2017-05-03 10:20 +0200
Message-ID<tCXFU-2rN-13@gated-at.bofh.it>
In reply to#1634682
On 03/05/17 12:40, Chris Packham wrote:
> When enabled temperature smoothing allows ramping the fan speed over a
> configurable period of time instead of jumping to the new speed
> instantaneously.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - use a single tempN_smoothing attribute
>
>  Documentation/hwmon/adt7475 |  4 ++
>  drivers/hwmon/adt7475.c     | 99 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 103 insertions(+)

I've had some feedback internally on this patch around making 
show_temp_st() smaller and using "enh_acoustics" instead of "enh_acou". 
I'll wait for a while to see if there's any more feedback from the list 
before sending out v3.

[toc] | [prev] | [next] | [standalone]

#1635134

FromGuenter Roeck <linux@roeck-us.net>
Date2017-05-03 18:40 +0200
Message-ID<tD5tN-7R3-21@gated-at.bofh.it>
In reply to#1634682
On Wed, May 03, 2017 at 12:40:09PM +1200, Chris Packham wrote:
> When enabled temperature smoothing allows ramping the fan speed over a
> configurable period of time instead of jumping to the new speed
> instantaneously.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - use a single tempN_smoothing attribute
> 
>  Documentation/hwmon/adt7475 |  4 ++
>  drivers/hwmon/adt7475.c     | 99 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 103 insertions(+)
> 
> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
> index 63507402cd4f..dd6433d819d0 100644
> --- a/Documentation/hwmon/adt7475
> +++ b/Documentation/hwmon/adt7475
> @@ -114,6 +114,10 @@ minimum (i.e. auto_point1_pwm). This behaviour be configured using the
>  pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
>  A value of 1 means the fans will run at auto_point1_pwm.
>  
> +The responsiveness of the ADT747x to temperature changes can be configured.
> +This allows smoothing of the fan speed transition. To set the transition time
> +set the value in ms in the temp[1-*]_smoothing sysfs attribute.
> +
>  Notes
>  -----
>  
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 85957324cd85..41342de6e20c 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -526,6 +526,96 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
>  	return count;
>  }
>  
> +/* Assuming CONFIG6[SLOW] is 0 */

Can you take that into account and calculate a "best fit" based on the
available options ?

> +static const int ad7475_st_map[] = {
> +	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
> +};
> +
> +static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
> +				  char *buf)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	int shift, idx;
> +	long val;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		shift = 0;
> +		idx = 0;
> +		break;
> +	case 1:
> +		shift = 4;
> +		idx = 1;
> +		break;
> +	case 2:
> +		shift = 0;
> +		idx = 1;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	val = data->enh_acou[idx] >> shift;
> +	if (val & 0x8) {
> +		return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
> +	} else {
> +		return sprintf(buf, "0\n");
> +	}
> +}
> +
> +static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
> +				 const char *buf, size_t count)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	unsigned char reg;
> +	int shift, idx;
> +	ulong val;
> +
> +	if (kstrtoul(buf, 10, &val))
> +		return -EINVAL;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		reg = REG_ENHANCE_ACOUSTICS1;
> +		shift = 0;
> +		idx = 0;
> +		break;
> +	case 1:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 4;
> +		idx = 1;
> +		break;
> +	case 2:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 0;
> +		idx = 1;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (val > 0) {
> +		val = find_closest_descending(val, ad7475_st_map,
> +					      ARRAY_SIZE(ad7475_st_map));
> +		val |= 0x8;
> +	}
> +
> +	mutex_lock(&data->lock);
> +
> +	data->enh_acou[idx] &= ~(0xf << shift);
> +	data->enh_acou[idx] |= (val << shift);
> +
> +	i2c_smbus_write_byte_data(client, reg, data->enh_acou[idx]);
> +
> +	mutex_unlock(&data->lock);
> +
> +	return count;
> +}
> +
>  /*
>   * Table of autorange values - the user will write the value in millidegrees,
>   * and we'll convert it
> @@ -1008,6 +1098,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 0);
>  static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 0);
>  static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
> @@ -1024,6 +1116,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 1);
> +static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 1);
>  static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
> @@ -1041,6 +1135,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 2);
> +static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 2);
>  static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
>  static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
>  			    MIN, 0);
> @@ -1125,6 +1221,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_temp2_input.dev_attr.attr,
>  	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
>  	&sensor_dev_attr_temp2_max.dev_attr.attr,
> @@ -1134,6 +1231,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_temp3_input.dev_attr.attr,
>  	&sensor_dev_attr_temp3_fault.dev_attr.attr,
>  	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
> @@ -1144,6 +1242,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_fan1_input.dev_attr.attr,
>  	&sensor_dev_attr_fan1_min.dev_attr.attr,
>  	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
> -- 
> 2.11.0.24.ge6920cf
>

[toc] | [prev] | [next] | [standalone]

#1635362

FromChris Packham <Chris.Packham@alliedtelesis.co.nz>
Date2017-05-04 03:30 +0200
Message-ID<tDdKG-4Wr-3@gated-at.bofh.it>
In reply to#1635134
On 04/05/17 04:30, Guenter Roeck wrote:
> On Wed, May 03, 2017 at 12:40:09PM +1200, Chris Packham wrote:
>> When enabled temperature smoothing allows ramping the fan speed over a
>> configurable period of time instead of jumping to the new speed
>> instantaneously.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>> Changes in v2:
>> - use a single tempN_smoothing attribute
>>
>>  Documentation/hwmon/adt7475 |  4 ++
>>  drivers/hwmon/adt7475.c     | 99 +++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 103 insertions(+)
>>
>> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
>> index 63507402cd4f..dd6433d819d0 100644
>> --- a/Documentation/hwmon/adt7475
>> +++ b/Documentation/hwmon/adt7475
>> @@ -114,6 +114,10 @@ minimum (i.e. auto_point1_pwm). This behaviour be configured using the
>>  pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
>>  A value of 1 means the fans will run at auto_point1_pwm.
>>
>> +The responsiveness of the ADT747x to temperature changes can be configured.
>> +This allows smoothing of the fan speed transition. To set the transition time
>> +set the value in ms in the temp[1-*]_smoothing sysfs attribute.
>> +
>>  Notes
>>  -----
>>
>> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
>> index 85957324cd85..41342de6e20c 100644
>> --- a/drivers/hwmon/adt7475.c
>> +++ b/drivers/hwmon/adt7475.c
>> @@ -526,6 +526,96 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
>>  	return count;
>>  }
>>
>> +/* Assuming CONFIG6[SLOW] is 0 */
>
> Can you take that into account and calculate a "best fit" based on the
> available options ?

Do you mean check CONFIG6[SLOW] and choose between 1 of 2 possible maps? 
Or have a unified map and choose both the SLOW and ACOU values?

I briefly considered the latter but things soon started to get 
complicated. It would look something like this (please excuse using a 
MUA as a code editor).

static const int ad7475_st_map[] = {
	52200, 37500, 26100, 18800, 17400, 12500, 10400, 7500,
	6500, 4700, 4400, 3100, 2200, 1600, 1100, 800,
};

i = find_closest_descending(val, ad7475_st_map,
			    ARRAY_SIZE(ad7475_st_map));
acou = i / 2;
slow = i % 2;

Going in reverse then gets really fun

slow = !!(i2c_smbus_read_byte_data(client, REG_CONFIG6) & BIT(PWMx))
acou = data->enh_acou[idx];

i = (acou * 2) + slow;

return sprintf(buf, "%d\n", ad7475_st_map[i]);

I could probably make the above work I just wasn't sure it was worth the 
hassle. Only the higher ranges would really be noticeable to anyone.

>
>> +static const int ad7475_st_map[] = {
>> +	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
>> +};
>> +
>> +static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
>> +				  char *buf)
>> +{
>> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
>> +	struct i2c_client *client = to_i2c_client(dev);
>> +	struct adt7475_data *data = i2c_get_clientdata(client);
>> +	int shift, idx;
>> +	long val;
>> +
>> +	switch (sattr->index) {
>> +	case 0:
>> +		shift = 0;
>> +		idx = 0;
>> +		break;
>> +	case 1:
>> +		shift = 4;
>> +		idx = 1;
>> +		break;
>> +	case 2:
>> +		shift = 0;
>> +		idx = 1;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	val = data->enh_acou[idx] >> shift;
>> +	if (val & 0x8) {
>> +		return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
>> +	} else {
>> +		return sprintf(buf, "0\n");
>> +	}
>> +}
>> +
>> +static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
>> +				 const char *buf, size_t count)
>> +{
>> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
>> +	struct i2c_client *client = to_i2c_client(dev);
>> +	struct adt7475_data *data = i2c_get_clientdata(client);
>> +	unsigned char reg;
>> +	int shift, idx;
>> +	ulong val;
>> +
>> +	if (kstrtoul(buf, 10, &val))
>> +		return -EINVAL;
>> +
>> +	switch (sattr->index) {
>> +	case 0:
>> +		reg = REG_ENHANCE_ACOUSTICS1;
>> +		shift = 0;
>> +		idx = 0;
>> +		break;
>> +	case 1:
>> +		reg = REG_ENHANCE_ACOUSTICS2;
>> +		shift = 4;
>> +		idx = 1;
>> +		break;
>> +	case 2:
>> +		reg = REG_ENHANCE_ACOUSTICS2;
>> +		shift = 0;
>> +		idx = 1;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (val > 0) {
>> +		val = find_closest_descending(val, ad7475_st_map,
>> +					      ARRAY_SIZE(ad7475_st_map));
>> +		val |= 0x8;
>> +	}
>> +
>> +	mutex_lock(&data->lock);
>> +
>> +	data->enh_acou[idx] &= ~(0xf << shift);
>> +	data->enh_acou[idx] |= (val << shift);
>> +
>> +	i2c_smbus_write_byte_data(client, reg, data->enh_acou[idx]);
>> +
>> +	mutex_unlock(&data->lock);
>> +
>> +	return count;
>> +}
>> +
>>  /*
>>   * Table of autorange values - the user will write the value in millidegrees,
>>   * and we'll convert it
>> @@ -1008,6 +1098,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>>  			    THERM, 0);
>>  static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>>  			    set_temp, HYSTERSIS, 0);
>> +static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
>> +			    set_temp_st, 0, 0);
>>  static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
>>  static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
>>  static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
>> @@ -1024,6 +1116,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>>  			    THERM, 1);
>>  static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>>  			    set_temp, HYSTERSIS, 1);
>> +static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
>> +			    set_temp_st, 0, 1);
>>  static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
>>  static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
>>  static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
>> @@ -1041,6 +1135,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>>  			    THERM, 2);
>>  static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>>  			    set_temp, HYSTERSIS, 2);
>> +static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
>> +			    set_temp_st, 0, 2);
>>  static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
>>  static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
>>  			    MIN, 0);
>> @@ -1125,6 +1221,7 @@ static struct attribute *adt7475_attrs[] = {
>>  	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
>>  	&sensor_dev_attr_temp1_crit.dev_attr.attr,
>>  	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
>> +	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
>>  	&sensor_dev_attr_temp2_input.dev_attr.attr,
>>  	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
>>  	&sensor_dev_attr_temp2_max.dev_attr.attr,
>> @@ -1134,6 +1231,7 @@ static struct attribute *adt7475_attrs[] = {
>>  	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
>>  	&sensor_dev_attr_temp2_crit.dev_attr.attr,
>>  	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
>> +	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
>>  	&sensor_dev_attr_temp3_input.dev_attr.attr,
>>  	&sensor_dev_attr_temp3_fault.dev_attr.attr,
>>  	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
>> @@ -1144,6 +1242,7 @@ static struct attribute *adt7475_attrs[] = {
>>  	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
>>  	&sensor_dev_attr_temp3_crit.dev_attr.attr,
>>  	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
>> +	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
>>  	&sensor_dev_attr_fan1_input.dev_attr.attr,
>>  	&sensor_dev_attr_fan1_min.dev_attr.attr,
>>  	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
>> --
>> 2.11.0.24.ge6920cf
>>
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web