Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1634681 > unrolled thread

[RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention

Started byChris Packham <chris.packham@alliedtelesis.co.nz>
First post2017-05-03 02:50 +0200
Last post2017-05-03 22:50 +0200
Articles 3 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention Chris Packham <chris.packham@alliedtelesis.co.nz> - 2017-05-03 02:50 +0200
    Re: [RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention Guenter Roeck <linux@roeck-us.net> - 2017-05-03 18:20 +0200
      Re: [RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention Chris Packham <Chris.Packham@alliedtelesis.co.nz> - 2017-05-03 22:50 +0200

#1634681 — [RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention

FromChris Packham <chris.packham@alliedtelesis.co.nz>
Date2017-05-03 02:50 +0200
Subject[RFC PATCH v2 2/3] hwmon: (adt7475) fan stall prevention
Message-ID<tCQEp-5rw-1@gated-at.bofh.it>
By default adt7475 will stop the fans (pwm duty cycle 0%) when the
temperature drops past Tmin - hysteresis. Some systems want to keep the
fans moving even when the temperature drops so add new sysfs attributes
that configure the enhanced acoustics min 1-3 which allows the fans to
run at the minimum configure pwm duty cycle.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v2:
- use pwmN_stall_dis as the attribute name. I think this describes the purpose
  pretty well. I went with a new attribute instead of overloading
  pwmN_auto_point1_pwm so this doesn't affect existing users.

 Documentation/hwmon/adt7475 |  5 +++++
 drivers/hwmon/adt7475.c     | 50 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)

diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index 0502f2b464e1..63507402cd4f 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -109,6 +109,11 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
 Fan speed may be set to maximum when the temperature sensor associated with
 the PWM control exceeds temp#_max.
 
+At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
+minimum (i.e. auto_point1_pwm). This behaviour be configured using the
+pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
+A value of 1 means the fans will run at auto_point1_pwm.
+
 Notes
 -----
 
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index ec0c43fbcdce..85957324cd85 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -79,6 +79,9 @@
 
 #define REG_TEMP_TRANGE_BASE	0x5F
 
+#define REG_ENHANCE_ACOUSTICS1	0x62
+#define REG_ENHANCE_ACOUSTICS2	0x63
+
 #define REG_PWM_MIN_BASE	0x64
 
 #define REG_TEMP_TMIN_BASE	0x67
@@ -209,6 +212,7 @@ struct adt7475_data {
 	u8 range[3];
 	u8 pwmctl[3];
 	u8 pwmchan[3];
+	u8 enh_acou[2];
 
 	u8 vid;
 	u8 vrm;
@@ -700,6 +704,43 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 	data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
 	i2c_smbus_write_byte_data(client, reg,
 				  data->pwm[sattr->nr][sattr->index]);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+
+static ssize_t show_stall_dis(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	u8 mask = BIT(5 + sattr->index);
+
+	return sprintf(buf, "%d\n", !!(data->enh_acou[0] & mask));
+}
+
+static ssize_t set_stall_dis(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val;
+	u8 mask = BIT(5 + sattr->index);
+
+	if (kstrtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->enh_acou[0] &= ~mask;
+	if (val)
+		data->enh_acou[0] |= mask;
+
+	i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
+				  data->enh_acou[0]);
 
 	mutex_unlock(&data->lock);
 
@@ -1028,6 +1069,8 @@ static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 0);
 static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+			    set_stall_dis, 0, 0);
 static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
 			    1);
 static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1040,6 +1083,8 @@ static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 1);
 static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+			    set_stall_dis, 0, 1);
 static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
 			    2);
 static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
@@ -1052,6 +1097,8 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MIN, 2);
 static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
 			    set_pwm, MAX, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
+			    set_stall_dis, 0, 2);
 
 /* Non-standard name, might need revisiting */
 static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
@@ -1112,12 +1159,14 @@ static struct attribute *adt7475_attrs[] = {
 	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_stall_dis.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_stall_dis.dev_attr.attr,
 	&dev_attr_pwm_use_point2_pwm_at_crit.attr,
 	NULL,
 };
@@ -1136,6 +1185,7 @@ static struct attribute *pwm2_attrs[] = {
 	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_stall_dis.dev_attr.attr,
 	NULL
 };
 
-- 
2.11.0.24.ge6920cf

[toc] | [next] | [standalone]

#1635120

FromGuenter Roeck <linux@roeck-us.net>
Date2017-05-03 18:20 +0200
Message-ID<tD5aq-7Ki-23@gated-at.bofh.it>
In reply to#1634681
On Wed, May 03, 2017 at 12:40:08PM +1200, Chris Packham wrote:
> By default adt7475 will stop the fans (pwm duty cycle 0%) when the
> temperature drops past Tmin - hysteresis. Some systems want to keep the
> fans moving even when the temperature drops so add new sysfs attributes
> that configure the enhanced acoustics min 1-3 which allows the fans to
> run at the minimum configure pwm duty cycle.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - use pwmN_stall_dis as the attribute name. I think this describes the purpose
>   pretty well. I went with a new attribute instead of overloading
>   pwmN_auto_point1_pwm so this doesn't affect existing users.
> 
>  Documentation/hwmon/adt7475 |  5 +++++
>  drivers/hwmon/adt7475.c     | 50 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
> index 0502f2b464e1..63507402cd4f 100644
> --- a/Documentation/hwmon/adt7475
> +++ b/Documentation/hwmon/adt7475
> @@ -109,6 +109,11 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
>  Fan speed may be set to maximum when the temperature sensor associated with
>  the PWM control exceeds temp#_max.
>  
> +At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
> +minimum (i.e. auto_point1_pwm). This behaviour be configured using the
> +pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.

That is really an awkward attribute name. I'll have to think about this some
more.

Guenter

> +A value of 1 means the fans will run at auto_point1_pwm.
> +
>  Notes
>  -----
>  
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index ec0c43fbcdce..85957324cd85 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -79,6 +79,9 @@
>  
>  #define REG_TEMP_TRANGE_BASE	0x5F
>  
> +#define REG_ENHANCE_ACOUSTICS1	0x62
> +#define REG_ENHANCE_ACOUSTICS2	0x63
> +
>  #define REG_PWM_MIN_BASE	0x64
>  
>  #define REG_TEMP_TMIN_BASE	0x67
> @@ -209,6 +212,7 @@ struct adt7475_data {
>  	u8 range[3];
>  	u8 pwmctl[3];
>  	u8 pwmchan[3];
> +	u8 enh_acou[2];
>  
>  	u8 vid;
>  	u8 vrm;
> @@ -700,6 +704,43 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
>  	data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
>  	i2c_smbus_write_byte_data(client, reg,
>  				  data->pwm[sattr->nr][sattr->index]);
> +	mutex_unlock(&data->lock);
> +
> +	return count;
> +}
> +
> +
> +static ssize_t show_stall_dis(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	u8 mask = BIT(5 + sattr->index);
> +
> +	return sprintf(buf, "%d\n", !!(data->enh_acou[0] & mask));
> +}
> +
> +static ssize_t set_stall_dis(struct device *dev, struct device_attribute *attr,
> +			     const char *buf, size_t count)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	long val;
> +	u8 mask = BIT(5 + sattr->index);
> +
> +	if (kstrtol(buf, 10, &val))
> +		return -EINVAL;
> +
> +	mutex_lock(&data->lock);
> +
> +	data->enh_acou[0] &= ~mask;
> +	if (val)
> +		data->enh_acou[0] |= mask;
> +
> +	i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
> +				  data->enh_acou[0]);
>  
>  	mutex_unlock(&data->lock);
>  
> @@ -1028,6 +1069,8 @@ static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MIN, 0);
>  static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MAX, 0);
> +static SENSOR_DEVICE_ATTR_2(pwm1_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
> +			    set_stall_dis, 0, 0);
>  static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
>  			    1);
>  static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
> @@ -1040,6 +1083,8 @@ static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MIN, 1);
>  static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MAX, 1);
> +static SENSOR_DEVICE_ATTR_2(pwm2_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
> +			    set_stall_dis, 0, 1);
>  static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
>  			    2);
>  static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
> @@ -1052,6 +1097,8 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MIN, 2);
>  static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
>  			    set_pwm, MAX, 2);
> +static SENSOR_DEVICE_ATTR_2(pwm3_stall_dis, S_IRUGO | S_IWUSR, show_stall_dis,
> +			    set_stall_dis, 0, 2);
>  
>  /* Non-standard name, might need revisiting */
>  static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
> @@ -1112,12 +1159,14 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
> +	&sensor_dev_attr_pwm1_stall_dis.dev_attr.attr,
>  	&sensor_dev_attr_pwm3.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
> +	&sensor_dev_attr_pwm3_stall_dis.dev_attr.attr,
>  	&dev_attr_pwm_use_point2_pwm_at_crit.attr,
>  	NULL,
>  };
> @@ -1136,6 +1185,7 @@ static struct attribute *pwm2_attrs[] = {
>  	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
> +	&sensor_dev_attr_pwm2_stall_dis.dev_attr.attr,
>  	NULL
>  };
>  
> -- 
> 2.11.0.24.ge6920cf
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[toc] | [prev] | [next] | [standalone]

#1635270

FromChris Packham <Chris.Packham@alliedtelesis.co.nz>
Date2017-05-03 22:50 +0200
Message-ID<tD9nH-1VW-9@gated-at.bofh.it>
In reply to#1635120
On 04/05/17 04:10, Guenter Roeck wrote:
> On Wed, May 03, 2017 at 12:40:08PM +1200, Chris Packham wrote:
>> By default adt7475 will stop the fans (pwm duty cycle 0%) when the
>> temperature drops past Tmin - hysteresis. Some systems want to keep the
>> fans moving even when the temperature drops so add new sysfs attributes
>> that configure the enhanced acoustics min 1-3 which allows the fans to
>> run at the minimum configure pwm duty cycle.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>> Changes in v2:
>> - use pwmN_stall_dis as the attribute name. I think this describes the purpose
>>   pretty well. I went with a new attribute instead of overloading
>>   pwmN_auto_point1_pwm so this doesn't affect existing users.
>>
>>  Documentation/hwmon/adt7475 |  5 +++++
>>  drivers/hwmon/adt7475.c     | 50 +++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 55 insertions(+)
>>
>> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
>> index 0502f2b464e1..63507402cd4f 100644
>> --- a/Documentation/hwmon/adt7475
>> +++ b/Documentation/hwmon/adt7475
>> @@ -109,6 +109,11 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
>>  Fan speed may be set to maximum when the temperature sensor associated with
>>  the PWM control exceeds temp#_max.
>>
>> +At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
>> +minimum (i.e. auto_point1_pwm). This behaviour be configured using the
>> +pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut off.
>
> That is really an awkward attribute name. I'll have to think about this some
> more.

I agree. The other thing I considered was "halt" and using inverted 
logic so halt == 1 reflected the HW default of allowing fans to stop.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web