Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1634709 > unrolled thread

[PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros

Started byChen-Yu Tsai <wens@csie.org>
First post2017-05-03 05:20 +0200
Last post2017-05-03 05:20 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros Chen-Yu Tsai <wens@csie.org> - 2017-05-03 05:20 +0200

#1634709 — [PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros

FromChen-Yu Tsai <wens@csie.org>
Date2017-05-03 05:20 +0200
Subject[PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros
Message-ID<tCSZz-7mp-15@gated-at.bofh.it>
Now that the CCU device tree binding headers have been merged, we can
use the properly named macros in the device tree, instead of raw
numbers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index e12dd7170b8f..050d3e347740 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,6 +44,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
@@ -178,7 +181,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -225,8 +228,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 53>;
-			resets = <&ccu 40>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
-- 
2.11.0

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web