Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1570861 > unrolled thread

[PATCH v3 6/7] dt-bindings: Add Multi-Inno MI0283QT binding

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 6/7] dt-bindings: Add Multi-Inno MI0283QT binding Noralf Trønnes <noralf@tronnes.org> - 2017-01-31 17:10 +0100
    Re: [PATCH v3 6/7] dt-bindings: Add Multi-Inno MI0283QT binding Rob Herring <robh@kernel.org> - 2017-02-01 18:50 +0100

#1570861 — [PATCH v3 6/7] dt-bindings: Add Multi-Inno MI0283QT binding

Add device-tree binding documentation for the MI0283QT display panel.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---

Datasheet: https://cdn-shop.adafruit.com/datasheets/MI0283QT-11+V1.1.PDF

 .../bindings/display/multi-inno,mi0283qt.txt       | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt

diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000..eed48c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:	"multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:	D/C pin. The presence/absence of this GPIO determines
+		the panel interface mode (IM[3:0] pins):
+		- present: IM=x110 4-wire 8-bit data serial interface
+		- absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:	Reset pin
+- power-supply:	A regulator node for the supply voltage.
+- backlight:	phandle of the backlight device attached to the panel
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	mi0283qt@0{
+		compatible = "multi-inno,mi0283qt";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		rotation = <90>;
+		dc-gpios = <&gpio 25 0>;
+		backlight = <&backlight>;
+	};
--
2.10.2

[toc] | [next] | [standalone]

#1571848

On Tue, Jan 31, 2017 at 05:03:18PM +0100, Noralf Trønnes wrote:
> Add device-tree binding documentation for the MI0283QT display panel.
> 
> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
> ---
> 
> Datasheet: https://cdn-shop.adafruit.com/datasheets/MI0283QT-11+V1.1.PDF
> 
>  .../bindings/display/multi-inno,mi0283qt.txt       | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web