Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1571593 > unrolled thread

[PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description Lee Jones <lee.jones@linaro.org> - 2017-02-01 15:40 +0100
    Re: [STLinux Kernel] [PATCH v2 06/10] dt-bindings: serial: Update  'uart-has-rtscts' description Peter Griffin <peter.griffin@linaro.org> - 2017-02-01 16:00 +0100

#1571593 — [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description

'uart-has-rtscts' property and 'rts-gpios|cts-gpios' are normally
mutually exclusive, however it is possible for some drivers to have
a dynamic approach, meaning that both properties can be relevant.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/serial/serial.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
index fd970f7..b542a0e 100644
--- a/Documentation/devicetree/bindings/serial/serial.txt
+++ b/Documentation/devicetree/bindings/serial/serial.txt
@@ -23,7 +23,8 @@ Optional properties:
     they are available for use (wired and enabled by pinmux configuration).
     This depends on both the UART hardware and the board wiring.
     Note that this property is mutually-exclusive with "cts-gpios" and
-    "rts-gpios" above.
+    "rts-gpios" above, unless support is provided to switch between modes
+    dynamically.
 
 
 Examples:
-- 
2.9.3

[toc] | [next] | [standalone]

#1571627 — Re: [STLinux Kernel] [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description

On Wed, 01 Feb 2017, Lee Jones wrote:

> 'uart-has-rtscts' property and 'rts-gpios|cts-gpios' are normally
> mutually exclusive, however it is possible for some drivers to have
> a dynamic approach, meaning that both properties can be relevant.
> 
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Acked-by: Peter Griffin <peter.griffin@linaro.org>

> ---
>  Documentation/devicetree/bindings/serial/serial.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
> index fd970f7..b542a0e 100644
> --- a/Documentation/devicetree/bindings/serial/serial.txt
> +++ b/Documentation/devicetree/bindings/serial/serial.txt
> @@ -23,7 +23,8 @@ Optional properties:
>      they are available for use (wired and enabled by pinmux configuration).
>      This depends on both the UART hardware and the board wiring.
>      Note that this property is mutually-exclusive with "cts-gpios" and
> -    "rts-gpios" above.
> +    "rts-gpios" above, unless support is provided to switch between modes
> +    dynamically.
>  
>  
>  Examples:

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web