Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1571301 > unrolled thread

[PATCH v9 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

Started byHoegeun Kwon <hoegeun.kwon@samsung.com>
First post2017-02-01 08:50 +0100
Last post2017-02-01 08:50 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v9 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel  device on TM2 board Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-02-01 08:50 +0100

#1571301 — [PATCH v9 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

FromHoegeun Kwon <hoegeun.kwon@samsung.com>
Date2017-02-01 08:50 +0100
Subject[PATCH v9 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
Message-ID<t5XPY-2ZX-21@gated-at.bofh.it>
From: Hyungwon Hwang <human.hwang@samsung.com>

This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index dea0a6f..db3fed2 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -52,6 +52,18 @@
 	assigned-clock-rates = <250000000>, <400000000>;
 };
 
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 
-- 
1.9.1

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web