Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1568074 > unrolled thread

[PATCH 3.12 060/235] PCI: Check for PME in targeted sleep state

Started byJiri Slaby <jslaby@suse.cz>
First post2017-01-27 12:10 +0100
Last post2017-01-27 12:10 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 3.12 060/235] PCI: Check for PME in targeted sleep state Jiri Slaby <jslaby@suse.cz> - 2017-01-27 12:10 +0100

#1568074 — [PATCH 3.12 060/235] PCI: Check for PME in targeted sleep state

FromJiri Slaby <jslaby@suse.cz>
Date2017-01-27 12:10 +0100
Subject[PATCH 3.12 060/235] PCI: Check for PME in targeted sleep state
Message-ID<t4czM-3lb-27@gated-at.bofh.it>
From: Alan Stern <stern@rowland.harvard.edu>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6496ebd7edf446fccf8266a1a70ffcb64252593e upstream.

One some systems, the firmware does not allow certain PCI devices to be put
in deep D-states.  This can cause problems for wakeup signalling, if the
device does not support PME# in the deepest allowed suspend state.  For
example, Pierre reports that on his system, ACPI does not permit his xHCI
host controller to go into D3 during runtime suspend -- but D3 is the only
state in which the controller can generate PME# signals.  As a result, the
controller goes into runtime suspend but never wakes up, so it doesn't work
properly.  USB devices plugged into the controller are never detected.

If the device relies on PME# for wakeup signals but is not capable of
generating PME# in the target state, the PCI core should accurately report
that it cannot do wakeup from runtime suspend.  This patch modifies the
pci_dev_run_wake() routine to add this check.

Reported-by: Pierre de Villemereuil <flyos@mailoo.org>
Tested-by: Pierre de Villemereuil <flyos@mailoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/pci/pci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 36c3e71d54b5..1b9548fb9102 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1906,6 +1906,10 @@ bool pci_dev_run_wake(struct pci_dev *dev)
 	if (!dev->pme_support)
 		return false;
 
+	/* PME-capable in principle, but not from the intended sleep state */
+	if (!pci_pme_capable(dev, pci_target_state(dev)))
+		return false;
+
 	while (bus->parent) {
 		struct pci_dev *bridge = bus->self;
 
-- 
2.11.0

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web