Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1568033 > unrolled thread
| Started by | Cyrille Pitchen <cyrille.pitchen@atmel.com> |
|---|---|
| First post | 2017-01-27 11:50 +0100 |
| Last post | 2017-01-27 11:50 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v3 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ Cyrille Pitchen <cyrille.pitchen@atmel.com> - 2017-01-27 11:50 +0100
| From | Cyrille Pitchen <cyrille.pitchen@atmel.com> |
|---|---|
| Date | 2017-01-27 11:50 +0100 |
| Subject | Re: [PATCH v3 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ |
| Message-ID | <t4cgp-2YU-3@gated-at.bofh.it> |
Le 18/08/2016 à 09:37, Yunhui Cui a écrit :
> There are some read modes for flash, such as NORMAL, FAST,
> QUAD, DDR QUAD. These modes will use the identical lut table base
> So rename SEQID_QUAD_READ to SEQID_READ.
>
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
Applied to the spi-nor tree.
Thanks!
> ---
> drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 5ad6402..21c77e8 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -193,7 +193,7 @@
> #define QUADSPI_LUT_NUM 64
>
> /* SEQID -- we can have 16 seqids at most. */
> -#define SEQID_QUAD_READ 0
> +#define SEQID_READ 0
> #define SEQID_WREN 1
> #define SEQID_WRDI 2
> #define SEQID_RDSR 3
> @@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> for (i = 0; i < QUADSPI_LUT_NUM; i++)
> qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
>
> - /* Quad Read */
> - lut_base = SEQID_QUAD_READ * 4;
> + /* Read */
> + lut_base = SEQID_READ * 4;
>
> qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
> base + QUADSPI_LUT(lut_base));
> @@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
> {
> switch (cmd) {
> case SPINOR_OP_READ_1_1_4:
> - return SEQID_QUAD_READ;
> + return SEQID_READ;
> case SPINOR_OP_WREN:
> return SEQID_WREN;
> case SPINOR_OP_WRDI:
>
Back to top | Article view | linux.kernel
csiph-web