Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1569184 > unrolled thread

[PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping <john@metanate.com> - 2017-01-29 15:10 +0100

#1569184 — [PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing

These values are specified as constant time periods but the PHY
configuration is in terms of the current lane byte clock so using
constant values guarantees that the timings will be outside the
specification with some display configurations.

Derive the necessary configuration from the byte clock in order to
ensure that the PHY configuration is correct.

Signed-off-by: John Keeping <john@metanate.com>
---
v3:
- Wrap some long lines
Unchanged in v2

 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 39 ++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index cfe7e4ba305c..85edf6dd2bac 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -383,6 +383,26 @@ static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code,
 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
 }
 
+/**
+ * ns2bc - Nanoseconds to byte clock cycles
+ */
+static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns)
+{
+	unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	return (ns * (byte_clk_khz / 1000) + 999) / 1000;
+}
+
+/**
+ * ns2ui - Nanoseconds to UI time periods
+ */
+static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
+{
+	unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC;
+
+	return (ns * (byte_clk_khz / 1000) + 999) / 1000;
+}
+
 static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 {
 	int ret, testdin, vco, val;
@@ -434,10 +454,21 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 					 SETRD_MAX | POWER_MANAGE |
 					 TER_RESISTORS_ON);
 
-
-	dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf);
-	dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55);
-	dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | 0xa);
+	dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
+	dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
+	dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
+	dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
+	dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
+	dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
+
+	dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
+	dw_mipi_dsi_phy_write(dsi, 0x71,
+			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
+	dw_mipi_dsi_phy_write(dsi, 0x72,
+			      THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
+	dw_mipi_dsi_phy_write(dsi, 0x73,
+			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
+	dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
 
 	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
 				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
-- 
2.11.0.197.gb556de5.dirty

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web