Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1562819 > unrolled thread

[PATCH v3 2/3] input: pwm-beeper: add documentation for volume devicetree bindings

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 2/3] input: pwm-beeper: add documentation for volume devicetree bindings Frieder Schrempf <frieder.schrempf@exceet.de> - 2017-01-19 16:30 +0100
    Re: [PATCH v3 2/3] input: pwm-beeper: add documentation for volume  devicetree bindings Rob Herring <robh@kernel.org> - 2017-01-23 15:50 +0100

#1562819 — [PATCH v3 2/3] input: pwm-beeper: add documentation for volume devicetree bindings

This patch adds the documentation for the devicetree bindings to set
the volume levels.

Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
---
Changes in v3:
 - change description of volume-levels to be used for linear levels
 
 .../devicetree/bindings/input/pwm-beeper.txt         | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae..496b68f 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,23 @@ Registers a PWM device as beeper.
 Required properties:
 - compatible: should be "pwm-beeper"
 - pwms: phandle to the physical PWM device
+
+Optional properties:
+- volume-levels: Array of PWM duty cycle values that correspond to
+      linear volume levels. These need to be in the range of 0 to 500,
+      while 0 means 0% duty cycle (mute) and 500 means 50% duty cycle
+      (max volume).
+      Please note that the actual volume of most beepers is highly
+      non-linear, which means that low volume levels are probably somewhere
+      in the range of 1 to 30 (0.1-3% duty cycle).
+- default-volume-level: the default volume level (index into the
+      array defined by the "volume-levels" property)
+
+Example:
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 5000>;
+		volume-levels = <0 8 20 40 500>;
+		default-volume-level = <4>;
+	};
-- 
2.7.4

[toc] | [next] | [standalone]

#1565011 — Re: [PATCH v3 2/3] input: pwm-beeper: add documentation for volume devicetree bindings

On Thu, Jan 19, 2017 at 04:24:09PM +0100, Frieder Schrempf wrote:
> This patch adds the documentation for the devicetree bindings to set
> the volume levels.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
> ---
> Changes in v3:
>  - change description of volume-levels to be used for linear levels
>  
>  .../devicetree/bindings/input/pwm-beeper.txt         | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web