Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1564056 > unrolled thread

[PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options Matt Ranostay <matt@ranostay.consulting> - 2017-01-21 07:00 +0100
    Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and  pwrseq-sd8787 options Rob Herring <robh@kernel.org> - 2017-01-23 18:10 +0100
      Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and  pwrseq-sd8787 options Matt Ranostay <matt@ranostay.consulting> - 2017-01-23 22:10 +0100

#1564056 — [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
---
 .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt          | 14 ++++++++++++++
 .../devicetree/bindings/net/wireless/marvell-8xxx.txt      |  7 ++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
new file mode 100644
index 000000000000..4bb56766982e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
@@ -0,0 +1,14 @@
+* Marvell SD8787 power sequence provider
+
+Required properties:
+- compatible: must be "mmc-pwrseq-sd8787".
+- powerdown-gpio: contains a power down GPIO specifier with active state
+- reset-gpio: contains a reset GPIO specifier with active state
+
+Example:
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+		reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+	}
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 980b16df74c3..0854451ff91d 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -1,4 +1,4 @@
-Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
+Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices
 ------
 
 This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
@@ -8,6 +8,7 @@ connects the device to the system.
 Required properties:
 
   - compatible : should be one of the following:
+	* "marvell,sd8787"
 	* "marvell,sd8897"
 	* "marvell,sd8997"
 	* "pci11ab,2b42"
@@ -34,6 +35,9 @@ Optional properties:
 		 so that the wifi chip can wakeup host platform under certain condition.
 		 during system resume, the irq will be disabled to make sure
 		 unnecessary interrupt is not received.
+  - vmmc-supply: a phandle of a regulator, supplying VCC to the card
+  - mmc-pwrseq:  phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+		 for documentation of MMC power sequence bindings.
 
 Example:
 
@@ -46,6 +50,7 @@ so that firmware can wakeup host using this device side pin.
 &mmc3 {
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-- 
2.10.2

[toc] | [next] | [standalone]

#1565143 — Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options

On Fri, Jan 20, 2017 at 09:50:38PM -0800, Matt Ranostay wrote:
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
> ---
>  .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt          | 14 ++++++++++++++
>  .../devicetree/bindings/net/wireless/marvell-8xxx.txt      |  7 ++++++-
>  2 files changed, 20 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> new file mode 100644
> index 000000000000..4bb56766982e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> @@ -0,0 +1,14 @@
> +* Marvell SD8787 power sequence provider
> +
> +Required properties:
> +- compatible: must be "mmc-pwrseq-sd8787".
> +- powerdown-gpio: contains a power down GPIO specifier with active state
> +- reset-gpio: contains a reset GPIO specifier with active state

My comments on the previous v3 still apply.

> +
> +Example:
> +
> +	wifi_pwrseq: wifi_pwrseq {
> +		compatible = "mmc-pwrseq-sd8787";
> +		powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
> +		reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
> +	}

[toc] | [prev] | [next] | [standalone]

#1565308 — Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options

On Mon, Jan 23, 2017 at 9:04 AM, Rob Herring <robh@kernel.org> wrote:
> On Fri, Jan 20, 2017 at 09:50:38PM -0800, Matt Ranostay wrote:
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
>> ---
>>  .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt          | 14 ++++++++++++++
>>  .../devicetree/bindings/net/wireless/marvell-8xxx.txt      |  7 ++++++-
>>  2 files changed, 20 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>> new file mode 100644
>> index 000000000000..4bb56766982e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>> @@ -0,0 +1,14 @@
>> +* Marvell SD8787 power sequence provider
>> +
>> +Required properties:
>> +- compatible: must be "mmc-pwrseq-sd8787".
>> +- powerdown-gpio: contains a power down GPIO specifier with active state
>> +- reset-gpio: contains a reset GPIO specifier with active state
>
> My comments on the previous v3 still apply.

Ah yikes.. forgot to increment the patchset.  And noticed the gpio
isn't gpios... will fixed in "v4"

Thanks,

Matt

>
>> +
>> +Example:
>> +
>> +     wifi_pwrseq: wifi_pwrseq {
>> +             compatible = "mmc-pwrseq-sd8787";
>> +             powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
>> +             reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
>> +     }

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web