Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1563358 > unrolled thread
| Started by | Vignesh R <vigneshr@ti.com> |
|---|---|
| First post | 2017-01-20 09:20 +0100 |
| Last post | 2017-01-20 09:20 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH RESEND 2/3] serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x Vignesh R <vigneshr@ti.com> - 2017-01-20 09:20 +0100
| From | Vignesh R <vigneshr@ti.com> |
|---|---|
| Date | 2017-01-20 09:20 +0100 |
| Subject | [PATCH RESEND 2/3] serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x |
| Message-ID | <t1CAp-4Pq-1@gated-at.bofh.it> |
UART uses as EDMA as dma engine on AM437x SoC and therefore, requires
OMAP_DMA_TX_KICK quirk just like AM33xx. So, enable OMAP_DMA_TX_KICK
quirk for AM437x platform as well. While at that, drop use of
of_machine_is_compatible() and instead pass quirks via device data.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
drivers/tty/serial/8250/8250_omap.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 4ad1934ef6ed..97766dcd67d4 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1078,15 +1078,15 @@ static int omap8250_no_handle_irq(struct uart_port *port)
}
static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
-static const u8 am4372_habit = UART_ERRATA_CLOCK_DISABLE;
+static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
static const struct of_device_id omap8250_dt_ids[] = {
{ .compatible = "ti,omap2-uart" },
{ .compatible = "ti,omap3-uart" },
{ .compatible = "ti,omap4-uart" },
{ .compatible = "ti,am3352-uart", .data = &am3352_habit, },
- { .compatible = "ti,am4372-uart", .data = &am4372_habit, },
- { .compatible = "ti,dra742-uart", .data = &am4372_habit, },
+ { .compatible = "ti,am4372-uart", .data = &am3352_habit, },
+ { .compatible = "ti,dra742-uart", .data = &dra742_habit, },
{},
};
MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
@@ -1221,9 +1221,6 @@ static int omap8250_probe(struct platform_device *pdev)
priv->omap8250_dma.rx_size = RX_TRIGGER;
priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER;
priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER;
-
- if (of_machine_is_compatible("ti,am33xx"))
- priv->habit |= OMAP_DMA_TX_KICK;
/*
* pause is currently not supported atleast on omap-sdma
* and edma on most earlier kernels.
--
2.11.0
Back to top | Article view | linux.kernel
csiph-web