Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1560212 > unrolled thread

RE: [PATCH RFC 0/4] 5-level EPT

Started by"Li, Liang Z" <liang.z.li@intel.com>
First post2017-01-17 03:20 +0100
Last post2017-01-17 03:20 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  RE: [PATCH RFC 0/4] 5-level EPT "Li, Liang Z" <liang.z.li@intel.com> - 2017-01-17 03:20 +0100

#1560212 — RE: [PATCH RFC 0/4] 5-level EPT

From"Li, Liang Z" <liang.z.li@intel.com>
Date2017-01-17 03:20 +0100
SubjectRE: [PATCH RFC 0/4] 5-level EPT
Message-ID<t0rxn-Rx-3@gated-at.bofh.it>
> On 29/12/2016 10:25, Liang Li wrote:
> > x86-64 is currently limited physical address width to 46 bits, which
> > can support 64 TiB of memory. Some vendors require to support more for
> > some use case. Intel plans to extend the physical address width to
> > 52 bits in some of the future products.
> >
> > The current EPT implementation only supports 4 level page table, which
> > can support maximum 48 bits physical address width, so it's needed to
> > extend the EPT to 5 level to support 52 bits physical address width.
> >
> > This patchset has been tested in the SIMICS environment for 5 level
> > paging guest, which was patched with Kirill's patchset for enabling
> > 5 level page table, with both the EPT and shadow page support. I just
> > covered the booting process, the guest can boot successfully.
> >
> > Some parts of this patchset can be improved. Any comments on the
> > design or the patches would be appreciated.
> 
> I will review the patches.  They seem fairly straightforward.
> 
> However, I am worried about the design of the 5-level page table feature
> with respect to migration.
> 
> Processors that support the new LA57 mode can write 57-canonical/48-
> noncanonical linear addresses to some registers even when LA57 mode is
> inactive.  This is true even of unprivileged instructions, in particular
> WRFSBASE/WRGSBASE.
> 
> This is fairly bad because, if a guest performs such a write (because of a bug
> or because of malice), it will not be possible to migrate the virtual machine to
> a machine that lacks LA57 mode.
> 
> Ordinarily, hypervisors trap CPUID to hide features that are only present in
> some processors of a heterogeneous cluster, and the hypervisor also traps
> for example CR4 writes to prevent enabling features that were masked away.
> In this case, however, the only way for the hypervisor to prevent the write
> would be to run the guest with
> CR4.FSGSBASE=0 and trap all executions of WRFSBASE/WRGSBASE.  This
> might have negative effects on performance for workloads that use the
> instructions.
> 
> Of course, this is a problem even without your patches.  However, I think it
> should be addressed first.  I am seriously thinking of blacklisting FSGSBASE
> completely on LA57 machines until the above is fixed in hardware.
> 
> Paolo

The issue has already been forwarded to the hardware guys, still waiting for the feedback.

Thanks!
Liang

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web