Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1561494 > unrolled thread

[PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play Neil Armstrong <narmstrong@baylibre.com> - 2017-01-18 12:00 +0100
    Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play Kevin Hilman <khilman@baylibre.com> - 2017-01-19 00:30 +0100
      Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and  Play Neil Armstrong <narmstrong@baylibre.com> - 2017-01-19 09:20 +0100
        Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play Kevin Hilman <khilman@baylibre.com> - 2017-01-19 19:20 +0100

#1561494 — [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

Adds support for the WeTek Hub and Play2 boards.
The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.

Both are based on the p200 Reference Design and out-of-tree support is
based on OpenELEC kernel at [1].

[1] https://github.com/wetek-enigma/linux-amlogic

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  2 +
 .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts      | 66 +++++++++++++++
 .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    | 94 ++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0d7bfbf..cc2e2dd 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 0000000..56f8559
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 0000000..ea79fdd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
-- 
1.9.1

[toc] | [next] | [standalone]

#1562278

Neil Armstrong <narmstrong@baylibre.com> writes:

> Adds support for the WeTek Hub and Play2 boards.
> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>
> Both are based on the p200 Reference Design and out-of-tree support is
> based on OpenELEC kernel at [1].
>
> [1] https://github.com/wetek-enigma/linux-amlogic
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Did you get the GPIO/button info from the LibreELEC tree or did you find
some schematics someplace?  If you found any schematics, it would be
nice to have links in the DTS files.

Kevin

[toc] | [prev] | [next] | [standalone]

#1562460 — Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

On 01/18/2017 11:53 PM, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> Adds support for the WeTek Hub and Play2 boards.
>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>
>> Both are based on the p200 Reference Design and out-of-tree support is
>> based on OpenELEC kernel at [1].
>>
>> [1] https://github.com/wetek-enigma/linux-amlogic
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> Did you get the GPIO/button info from the LibreELEC tree or did you find
> some schematics someplace?  If you found any schematics, it would be
> nice to have links in the DTS files.
> 
> Kevin
> 

It was in the dts of the LibreELEC tree, I found no schematics so far.
I can respin a v2 with a link to the LibreELEC dts files.

Neil

[toc] | [prev] | [next] | [standalone]

#1562988

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>> 
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> 
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace?  If you found any schematics, it would be
>> nice to have links in the DTS files.
>> 
>> Kevin
>> 
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.

No need for a respin.  But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.

Kevin

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web