Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1514456 > unrolled thread
| Started by | Axel Haslam <ahaslam@baylibre.com> |
|---|---|
| First post | 2016-11-03 12:20 +0100 |
| Last post | 2016-11-03 12:20 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH/RFC v2 2/3] regulator: fixed: dt: Allow an optional over current pin Axel Haslam <ahaslam@baylibre.com> - 2016-11-03 12:20 +0100
| From | Axel Haslam <ahaslam@baylibre.com> |
|---|---|
| Date | 2016-11-03 12:20 +0100 |
| Subject | [PATCH/RFC v2 2/3] regulator: fixed: dt: Allow an optional over current pin |
| Message-ID | <szodQ-38c-17@gated-at.bofh.it> |
Add support for an optional over current input pin which can be used to send an over current event to the regulator consumer. Cc: devicetree@vger.kernel.org Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 4fae41d..b145abb 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. -vin-supply: Input supply name. +- over-current-gpios: Input gpio that signal an over current condition. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -26,6 +27,7 @@ Example: regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 16 0>; + over-current-gpios = <&gpio1 18 0>; startup-delay-us = <70000>; enable-active-high; regulator-boot-on; -- 2.10.1
Back to top | Article view | linux.kernel
csiph-web