Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1513988 > unrolled thread

[PATCH v5 7/7] arm64: dts: NS2: add AMAC ethernet support

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v5 7/7] arm64: dts: NS2: add AMAC ethernet support Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:10 +0100
    Re: [PATCH v5 7/7] arm64: dts: NS2: add AMAC ethernet support Florian Fainelli <f.fainelli@gmail.com> - 2016-11-02 18:20 +0100

#1513988 — [PATCH v5 7/7] arm64: dts: NS2: add AMAC ethernet support

Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
tree

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts |  5 +++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 12 ++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 2d7872a..2e4d90d 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -56,6 +56,10 @@
 	};
 };
 
+&enet {
+	status = "ok";
+};
+
 &pci_phy0 {
 	status = "ok";
 };
@@ -172,6 +176,7 @@
 &mdio_mux_iproc {
 	mdio@10 {
 		gphy0: eth-phy@10 {
+			enet-phy-lane-swap;
 			reg = <0x10>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index d95dc40..773ed59 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -191,6 +191,18 @@
 
 		#include "ns2-clock.dtsi"
 
+		enet: ethernet@61000000 {
+			compatible = "brcm,ns2-amac";
+			reg = <0x61000000 0x1000>,
+			      <0x61090000 0x1000>,
+			      <0x61030000 0x100>;
+			reg-names = "amac_base", "idm_base", "nicpm_base";
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&gphy0>;
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
 		dma0: dma@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
-- 
2.7.4

[toc] | [next] | [standalone]

#1514001

On 11/02/2016 10:08 AM, Jon Mason wrote:
> Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
> tree
> 
> Signed-off-by: Jon Mason <jon.mason@broadcom.com>

Provided that the binding is satisfactory, I will take this one via
ARM64-SoC.
-- 
Florian

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web