Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1513411 > unrolled thread

[PATCH v3 0/6] add NS2 support to bgmac

Started byJon Mason <jon.mason@broadcom.com>
First post2016-11-01 19:00 +0100
Last post2016-11-01 21:10 +0100
Articles 3 — 2 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 0/6] add NS2 support to bgmac  Jon Mason <jon.mason@broadcom.com> - 2016-11-01 19:00 +0100
    Re: [PATCH v3 0/6] add NS2 support to bgmac Scott Branden <scott.branden@broadcom.com> - 2016-11-01 19:10 +0100
      Re: [PATCH v3 0/6] add NS2 support to bgmac Jon Mason <jon.mason@broadcom.com> - 2016-11-01 21:10 +0100

#1513411 — [PATCH v3 0/6] add NS2 support to bgmac

FromJon Mason <jon.mason@broadcom.com>
Date2016-11-01 19:00 +0100
Subject[PATCH v3 0/6] add NS2 support to bgmac
Message-ID<syLvP-3jQ-5@gated-at.bofh.it>
Changes in v3:
* Clean-up the bgmac DT binding doc (per Rob Herring)
* Document the lane swap binding and make it generic (Per Andrew Lunn)


Changes in v2:
* Remove the PHY power-on (per Andrew Lunn)
* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
  This results on none of the original PHY code from Vikas being
  present.  So, I'm removing him as an author and giving him
  "Inspired-by" credit.
* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
  Fainelli)
* Remove bgmac sleep (per Florian Fainelli)
* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
* Rebased on latest net-next
* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810


Add support for the amac found in the Broadcom Northstar2 SoC to the
bgmac driver.  This necessitates adding support to connect to an
externally defined phy (as described in the device tree) in the driver.
These phy changes are in addition to the changes necessary to get NS2
working.


Jon Mason (6):
  net: phy: broadcom: add bcm54xx_auxctl_read
  net: phy: broadcom: Add BCM54810 PHY entry
  Documentation: devicetree: net: add NS2 bindings to amac
  net: ethernet: bgmac: device tree phy enablement
  net: ethernet: bgmac: add NS2 support
  arm64: dts: NS2: add AMAC ethernet support

 .../devicetree/bindings/net/brcm,amac.txt          |  16 ++--
 arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   5 ++
 arch/arm64/boot/dts/broadcom/ns2.dtsi              |  12 +++
 drivers/net/ethernet/broadcom/bgmac-bcma.c         |  48 ++++++++++
 drivers/net/ethernet/broadcom/bgmac-platform.c     | 100 ++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bgmac.c              |  55 ++----------
 drivers/net/ethernet/broadcom/bgmac.h              |   8 ++
 drivers/net/phy/Kconfig                            |   2 +-
 drivers/net/phy/broadcom.c                         |  68 +++++++++++++-
 include/linux/brcmphy.h                            |  11 +++
 10 files changed, 268 insertions(+), 57 deletions(-)

-- 
2.7.4

[toc] | [next] | [standalone]

#1513412

FromScott Branden <scott.branden@broadcom.com>
Date2016-11-01 19:10 +0100
Message-ID<syLFv-3CE-13@gated-at.bofh.it>
In reply to#1513411
Hi Jon,

On 16-11-01 10:51 AM, Jon Mason wrote:
> Changes in v3:
> * Clean-up the bgmac DT binding doc (per Rob Herring)
> * Document the lane swap binding and make it generic (Per Andrew Lunn)
Where is the documentation of the lane swap binding?

>
>
> Changes in v2:
> * Remove the PHY power-on (per Andrew Lunn)
> * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
>   This results on none of the original PHY code from Vikas being
>   present.  So, I'm removing him as an author and giving him
>   "Inspired-by" credit.
> * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
>   Fainelli)
> * Remove bgmac sleep (per Florian Fainelli)
> * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
> * Rebased on latest net-next
> * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810
>
>
> Add support for the amac found in the Broadcom Northstar2 SoC to the
> bgmac driver.  This necessitates adding support to connect to an
> externally defined phy (as described in the device tree) in the driver.
> These phy changes are in addition to the changes necessary to get NS2
> working.
>
>
> Jon Mason (6):
>   net: phy: broadcom: add bcm54xx_auxctl_read
>   net: phy: broadcom: Add BCM54810 PHY entry
>   Documentation: devicetree: net: add NS2 bindings to amac
>   net: ethernet: bgmac: device tree phy enablement
>   net: ethernet: bgmac: add NS2 support
>   arm64: dts: NS2: add AMAC ethernet support
>
>  .../devicetree/bindings/net/brcm,amac.txt          |  16 ++--
>  arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   5 ++
>  arch/arm64/boot/dts/broadcom/ns2.dtsi              |  12 +++
>  drivers/net/ethernet/broadcom/bgmac-bcma.c         |  48 ++++++++++
>  drivers/net/ethernet/broadcom/bgmac-platform.c     | 100 ++++++++++++++++++++-
>  drivers/net/ethernet/broadcom/bgmac.c              |  55 ++----------
>  drivers/net/ethernet/broadcom/bgmac.h              |   8 ++
>  drivers/net/phy/Kconfig                            |   2 +-
>  drivers/net/phy/broadcom.c                         |  68 +++++++++++++-
>  include/linux/brcmphy.h                            |  11 +++
>  10 files changed, 268 insertions(+), 57 deletions(-)
>

[toc] | [prev] | [next] | [standalone]

#1513471

FromJon Mason <jon.mason@broadcom.com>
Date2016-11-01 21:10 +0100
Message-ID<syNxE-4RO-17@gated-at.bofh.it>
In reply to#1513412
On Tue, Nov 01, 2016 at 11:01:19AM -0700, Scott Branden wrote:
> Hi Jon,
> 
> On 16-11-01 10:51 AM, Jon Mason wrote:
> >Changes in v3:
> >* Clean-up the bgmac DT binding doc (per Rob Herring)
> >* Document the lane swap binding and make it generic (Per Andrew Lunn)
> Where is the documentation of the lane swap binding?

Sent out the wrong branch :(

Sending out v4 shortly with this patch.

> 
> >
> >
> >Changes in v2:
> >* Remove the PHY power-on (per Andrew Lunn)
> >* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
> >  This results on none of the original PHY code from Vikas being
> >  present.  So, I'm removing him as an author and giving him
> >  "Inspired-by" credit.
> >* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
> >  Fainelli)
> >* Remove bgmac sleep (per Florian Fainelli)
> >* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
> >* Rebased on latest net-next
> >* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810
> >
> >
> >Add support for the amac found in the Broadcom Northstar2 SoC to the
> >bgmac driver.  This necessitates adding support to connect to an
> >externally defined phy (as described in the device tree) in the driver.
> >These phy changes are in addition to the changes necessary to get NS2
> >working.
> >
> >
> >Jon Mason (6):
> >  net: phy: broadcom: add bcm54xx_auxctl_read
> >  net: phy: broadcom: Add BCM54810 PHY entry
> >  Documentation: devicetree: net: add NS2 bindings to amac
> >  net: ethernet: bgmac: device tree phy enablement
> >  net: ethernet: bgmac: add NS2 support
> >  arm64: dts: NS2: add AMAC ethernet support
> >
> > .../devicetree/bindings/net/brcm,amac.txt          |  16 ++--
> > arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   5 ++
> > arch/arm64/boot/dts/broadcom/ns2.dtsi              |  12 +++
> > drivers/net/ethernet/broadcom/bgmac-bcma.c         |  48 ++++++++++
> > drivers/net/ethernet/broadcom/bgmac-platform.c     | 100 ++++++++++++++++++++-
> > drivers/net/ethernet/broadcom/bgmac.c              |  55 ++----------
> > drivers/net/ethernet/broadcom/bgmac.h              |   8 ++
> > drivers/net/phy/Kconfig                            |   2 +-
> > drivers/net/phy/broadcom.c                         |  68 +++++++++++++-
> > include/linux/brcmphy.h                            |  11 +++
> > 10 files changed, 268 insertions(+), 57 deletions(-)
> >

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web