Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1511853 > unrolled thread

Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-10-29 20:10 +0200
    Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Linus Walleij <linus.walleij@linaro.org> - 2016-10-31 09:40 +0100

#1511853 — Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver

On Wed 26 Oct 16:32 PDT 2016, Michael Scott wrote:

> Initial pinctrl driver for QCOM msm8994 platforms.
> 
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
> 
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
> 
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
> 

I'm not up to speed on the 8992/8994 story, but please add a
"qcom,msm8992-pinctrl" compatible to the list as well.

> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing

I think this is good enough. It looks reasonable and you based it on the
data sheet. Any fixes to the tables can be added incrementally.

> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
> 
> Signed-off-by: Michael Scott <michael.scott@linaro.org>

Please add the compatible and you have my

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

[toc] | [next] | [standalone]

#1512402

On Sat, Oct 29, 2016 at 8:06 PM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:

> Please add the compatible and you have my
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Michael, please add this compatible, add the ACKs and resend and I'll
queue the patch.

Yours,
Linus Walleij

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web