Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1504319 > unrolled thread

[PATCH v2 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-10-19 22:40 +0200
    [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-10-19 22:40 +0200
      Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Kevin Hilman <khilman@baylibre.com> - 2016-10-21 20:50 +0200
        Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-10-21 22:00 +0200
          Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Kevin Hilman <khilman@baylibre.com> - 2016-10-24 19:10 +0200
            Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Rob Herring <robh@kernel.org> - 2016-10-27 00:10 +0200
              Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-10-27 16:10 +0200
                Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-11-10 22:10 +0100
                  Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Ulf Hansson <ulf.hansson@linaro.org> - 2016-11-11 13:50 +0100
      Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Rob Herring <robh@kernel.org> - 2016-10-27 01:00 +0200
        Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains Dave Gerlach <d-gerlach@ti.com> - 2016-10-27 16:10 +0200
    [PATCH v2 1/4] PM / Domains: Add generic data pointer to genpd data struct Dave Gerlach <d-gerlach@ti.com> - 2016-10-19 22:40 +0200
      Re: [PATCH v2 1/4] PM / Domains: Add generic data pointer to genpd  data struct Ulf Hansson <ulf.hansson@linaro.org> - 2016-10-25 11:50 +0200
    [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver Dave Gerlach <d-gerlach@ti.com> - 2016-10-19 22:40 +0200
      Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver Kevin Hilman <khilman@baylibre.com> - 2016-10-21 21:10 +0200
        Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver Santosh Shilimkar <santosh.shilimkar@oracle.com> - 2016-10-21 21:10 +0200
          Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver Dave Gerlach <d-gerlach@ti.com> - 2016-10-21 21:20 +0200
      Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver Ulf Hansson <ulf.hansson@linaro.org> - 2016-10-25 11:50 +0200
    [PATCH v2 4/4] ARM: keystone: Drop PM domain support for k2g Dave Gerlach <d-gerlach@ti.com> - 2016-10-19 22:40 +0200
    Re: [PATCH v2 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains "Rafael J. Wysocki" <rafael@kernel.org> - 2016-10-21 15:30 +0200
    Re: [PATCH v2 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains Kevin Hilman <khilman@baylibre.com> - 2016-10-25 19:10 +0200

Page 1 of 2  [1] 2  Next page →

#1504319 — [PATCH v2 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains

Hi,
This is v2 of the series to add support for TI SCI PM Domains. v1 of
the series can be found here [1]. Several things have changed since v1:

- New patch to add a void *data to struct generic_pm_domain_data to
  allow to store per device data associated with a genpd
- From v1, squash patch 1 and 2 to introduce docs and dt-bindings in
  one patch based on comment from Ulf
- Fix some grammar errors in Documentation
- Based on comments from Ulf, rework actual genpd implementation to
  avoid creating one genpd per device and instead use device start/stop
  hooks provided as part of genpd to control device state based on pm_runtime
  implementation. Also make use of new of_genpd_add_provider_simple API
  introduced by Jon Hunter and do not provide custom of_xlate to genpd core,
  instead registering devices as they probe through attach_dev hook provided
  by genpd framework.

Most of the changes were motivated by the comments from Ulf Hannson on v1 that we
should not use a 1-to-1 genpd to device mapping. The new approach allows us to
create a single genpd and store information about each device as they attach to
the genpd. Then the device start/stop hooks for that genpd leverage the
per-device data to control power states over the TI SCI protocol.

This driver makes use of the ti_sci driver sent here [2] by Nishanth Menon and
applies on top of his series on v4.9-rc1.

Regards,
Dave

[1] http://www.spinics.net/lists/arm-kernel/msg525204.html
[2] http://www.spinics.net/lists/arm-kernel/msg536851.html

Dave Gerlach (4):
  PM / Domains: Add generic data pointer to genpd data struct
  dt-bindings: Add TI SCI PM Domains
  soc: ti: Add ti_sci_pm_domains driver
  ARM: keystone: Drop PM domain support for k2g

 .../devicetree/bindings/soc/ti/sci-pm-domain.txt   |  54 ++++++
 MAINTAINERS                                        |   3 +
 arch/arm/mach-keystone/Kconfig                     |   1 +
 arch/arm/mach-keystone/pm_domain.c                 |   4 +-
 drivers/soc/ti/Kconfig                             |  12 ++
 drivers/soc/ti/Makefile                            |   1 +
 drivers/soc/ti/ti_sci_pm_domains.c                 | 198 +++++++++++++++++++++
 include/dt-bindings/genpd/k2g.h                    |  90 ++++++++++
 include/linux/pm_domain.h                          |   1 +
 9 files changed, 363 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
 create mode 100644 include/dt-bindings/genpd/k2g.h

-- 
2.9.3

[toc] | [next] | [standalone]

#1504321 — [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI protocol to
control device power states.

Also, provide macros representing each device index as understood
by TI SCI to be used in the device node power-domain references.
These are identifiers for the K2G devices managed by the PMMC.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
 MAINTAINERS                                        |  2 +
 include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
 3 files changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 create mode 100644 include/dt-bindings/genpd/k2g.h

diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 000000000000..32f38a349656
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,54 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1]. This pm domain
+implementation plugs into the generic pm domain framework and makes use of
+the TI SCI protocol power on and off each device when needed.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC,
+which in this case is the single implementation as documented by the generic
+PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 0.
+- ti,sci: Phandle to the TI SCI device to use for managing the devices.
+
+Example:
+--------------------
+k2g_pds: k2g_pds {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <0>;
+        ti,sci = <&pmmc>;
+};
+
+PM Domain Consumers
+===================
+Hardware blocks that require SCI control over their state must provide
+a reference to the sci-pm-domain they are part of and a unique device
+specific ID that identifies the device.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node.
+- ti,sci-id: index representing the device id to be passed oevr SCI to
+	     be used for device control.
+
+See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+
+Example:
+--------------------
+uart0: serial@02530c00 {
+	compatible = "ns16550a";
+	...
+	power-domains = <&k2g_pds>;
+	ti,sci-id = <K2G_DEV_UART0>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 467b29fafaca..d894873c2bff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11892,6 +11892,8 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
 F:	drivers/firmware/ti_sci*
 F:	include/linux/soc/ti/ti_sci_protocol.h
+F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F:	include/dt-bindings/genpd/k2g.h
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
new file mode 100644
index 000000000000..91ad827e0ca1
--- /dev/null
+++ b/include/dt-bindings/genpd/k2g.h
@@ -0,0 +1,90 @@
+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0			0x0000
+#define K2G_DEV_MLB0			0x0001
+#define K2G_DEV_DSS0			0x0002
+#define K2G_DEV_MCBSP0			0x0003
+#define K2G_DEV_MCASP0			0x0004
+#define K2G_DEV_MCASP1			0x0005
+#define K2G_DEV_MCASP2			0x0006
+#define K2G_DEV_DCAN0			0x0008
+#define K2G_DEV_DCAN1			0x0009
+#define K2G_DEV_EMIF0			0x000a
+#define K2G_DEV_MMCHS0			0x000b
+#define K2G_DEV_MMCHS1			0x000c
+#define K2G_DEV_GPMC0			0x000d
+#define K2G_DEV_ELM0			0x000e
+#define K2G_DEV_SPI0			0x0010
+#define K2G_DEV_SPI1			0x0011
+#define K2G_DEV_SPI2			0x0012
+#define K2G_DEV_SPI3			0x0013
+#define K2G_DEV_ICSS0			0x0014
+#define K2G_DEV_ICSS1			0x0015
+#define K2G_DEV_USB0			0x0016
+#define K2G_DEV_USB1			0x0017
+#define K2G_DEV_NSS0			0x0018
+#define K2G_DEV_PCIE0			0x0019
+#define K2G_DEV_GPIO0			0x001b
+#define K2G_DEV_GPIO1			0x001c
+#define K2G_DEV_TIMER64_0		0x001d
+#define K2G_DEV_TIMER64_1		0x001e
+#define K2G_DEV_TIMER64_2		0x001f
+#define K2G_DEV_TIMER64_3		0x0020
+#define K2G_DEV_TIMER64_4		0x0021
+#define K2G_DEV_TIMER64_5		0x0022
+#define K2G_DEV_TIMER64_6		0x0023
+#define K2G_DEV_MSGMGR0			0x0025
+#define K2G_DEV_BOOTCFG0		0x0026
+#define K2G_DEV_ARM_BOOTROM0		0x0027
+#define K2G_DEV_DSP_BOOTROM0		0x0029
+#define K2G_DEV_DEBUGSS0		0x002b
+#define K2G_DEV_UART0			0x002c
+#define K2G_DEV_UART1			0x002d
+#define K2G_DEV_UART2			0x002e
+#define K2G_DEV_EHRPWM0			0x002f
+#define K2G_DEV_EHRPWM1			0x0030
+#define K2G_DEV_EHRPWM2			0x0031
+#define K2G_DEV_EHRPWM3			0x0032
+#define K2G_DEV_EHRPWM4			0x0033
+#define K2G_DEV_EHRPWM5			0x0034
+#define K2G_DEV_EQEP0			0x0035
+#define K2G_DEV_EQEP1			0x0036
+#define K2G_DEV_EQEP2			0x0037
+#define K2G_DEV_ECAP0			0x0038
+#define K2G_DEV_ECAP1			0x0039
+#define K2G_DEV_I2C0			0x003a
+#define K2G_DEV_I2C1			0x003b
+#define K2G_DEV_I2C2			0x003c
+#define K2G_DEV_EDMA0			0x003f
+#define K2G_DEV_SEMAPHORE0		0x0040
+#define K2G_DEV_INTC0			0x0041
+#define K2G_DEV_GIC0			0x0042
+#define K2G_DEV_QSPI0			0x0043
+#define K2G_DEV_ARM_64B_COUNTER0	0x0044
+#define K2G_DEV_TETRIS0			0x0045
+#define K2G_DEV_CGEM0			0x0046
+#define K2G_DEV_MSMC0			0x0047
+#define K2G_DEV_CBASS0			0x0049
+#define K2G_DEV_BOARD0			0x004c
+#define K2G_DEV_EDMA1			0x004f
+
+#endif
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1506228 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

Dave Gerlach <d-gerlach@ti.com> writes:

> Add a generic power domain implementation, TI SCI PM Domains, that
> will hook into the genpd framework and allow the TI SCI protocol to
> control device power states.
>
> Also, provide macros representing each device index as understood
> by TI SCI to be used in the device node power-domain references.
> These are identifiers for the K2G devices managed by the PMMC.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> ---
>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>  MAINTAINERS                                        |  2 +
>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>  3 files changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>  create mode 100644 include/dt-bindings/genpd/k2g.h
>
> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> new file mode 100644
> index 000000000000..32f38a349656
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> @@ -0,0 +1,54 @@
> +Texas Instruments TI-SCI Generic Power Domain
> +---------------------------------------------
> +
> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
> +responsible for controlling the state of the IPs that are present.
> +Communication between the host processor running an OS and the system
> +controller happens through a protocol known as TI-SCI [1]. This pm domain
> +implementation plugs into the generic pm domain framework and makes use of
> +the TI SCI protocol power on and off each device when needed.
> +
> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
> +
> +PM Domain Node
> +==============
> +The PM domain node represents the global PM domain managed by the PMMC,
> +which in this case is the single implementation as documented by the generic
> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
> +
> +Required Properties:
> +--------------------
> +- compatible: should be "ti,sci-pm-domain"
> +- #power-domain-cells: Must be 0.
> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>
> +Example:
> +--------------------
> +k2g_pds: k2g_pds {

should use generic name like "power-contoller", e.g. k2g_pds: power-controller

> +        compatible = "ti,sci-pm-domain";
> +        #power-domain-cells = <0>;
> +        ti,sci = <&pmmc>;
> +};
> +
> +PM Domain Consumers
> +===================
> +Hardware blocks that require SCI control over their state must provide
> +a reference to the sci-pm-domain they are part of and a unique device
> +specific ID that identifies the device.
> +
> +Required Properties:
> +--------------------
> +- power-domains: phandle pointing to the corresponding PM domain node.
> +- ti,sci-id: index representing the device id to be passed oevr SCI to
> +	     be used for device control.

This ID doesn't look right.

Why not use #power-domain-cells = <1> and pass the index in the DT? ...

> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
> +
> +Example:
> +--------------------
> +uart0: serial@02530c00 {
> +	compatible = "ns16550a";
> +	...
> +	power-domains = <&k2g_pds>;
> +	ti,sci-id = <K2G_DEV_UART0>;

... like this:

	power-domains = <&k2g_pds K2G_DEV_UART0>;

Kevin

[toc] | [prev] | [next] | [standalone]

#1506256 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

Hi,
On 10/21/2016 01:48 PM, Kevin Hilman wrote:
> Dave Gerlach <d-gerlach@ti.com> writes:
>
>> Add a generic power domain implementation, TI SCI PM Domains, that
>> will hook into the genpd framework and allow the TI SCI protocol to
>> control device power states.
>>
>> Also, provide macros representing each device index as understood
>> by TI SCI to be used in the device node power-domain references.
>> These are identifiers for the K2G devices managed by the PMMC.
>>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>> ---
>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>  MAINTAINERS                                        |  2 +
>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>  3 files changed, 146 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>
>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>> new file mode 100644
>> index 000000000000..32f38a349656
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>> @@ -0,0 +1,54 @@
>> +Texas Instruments TI-SCI Generic Power Domain
>> +---------------------------------------------
>> +
>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>> +responsible for controlling the state of the IPs that are present.
>> +Communication between the host processor running an OS and the system
>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>> +implementation plugs into the generic pm domain framework and makes use of
>> +the TI SCI protocol power on and off each device when needed.
>> +
>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>> +
>> +PM Domain Node
>> +==============
>> +The PM domain node represents the global PM domain managed by the PMMC,
>> +which in this case is the single implementation as documented by the generic
>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>> +
>> +Required Properties:
>> +--------------------
>> +- compatible: should be "ti,sci-pm-domain"
>> +- #power-domain-cells: Must be 0.
>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>
>> +Example:
>> +--------------------
>> +k2g_pds: k2g_pds {
>
> should use generic name like "power-contoller", e.g. k2g_pds: power-controller

Ok, that makes more sense.

>
>> +        compatible = "ti,sci-pm-domain";
>> +        #power-domain-cells = <0>;
>> +        ti,sci = <&pmmc>;
>> +};
>> +
>> +PM Domain Consumers
>> +===================
>> +Hardware blocks that require SCI control over their state must provide
>> +a reference to the sci-pm-domain they are part of and a unique device
>> +specific ID that identifies the device.
>> +
>> +Required Properties:
>> +--------------------
>> +- power-domains: phandle pointing to the corresponding PM domain node.
>> +- ti,sci-id: index representing the device id to be passed oevr SCI to
>> +	     be used for device control.
>
> This ID doesn't look right.
>
> Why not use #power-domain-cells = <1> and pass the index in the DT? ...
>
>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
>> +
>> +Example:
>> +--------------------
>> +uart0: serial@02530c00 {
>> +	compatible = "ns16550a";
>> +	...
>> +	power-domains = <&k2g_pds>;
>> +	ti,sci-id = <K2G_DEV_UART0>;
>
> ... like this:
>
> 	power-domains = <&k2g_pds K2G_DEV_UART0>;

That's how I did it in version one actually. I was able to define my own 
xlate function to parse the phandle and get that index, but Ulf pointed 
me to this series by Jon Hunter [1] that simplified genpd providers and 
dropped the concept of adding your own xlate. This locks the onecell 
approach to using a fixed static array of genpds that get indexed into 
(without passing the index to the provider, just the genpd that's looked 
up), which doesn't fit our usecase, as we don't want a 1 to 1 genpd to 
device mapping based on the comments provided in v1. Now we just use the 
genpd device attach/detach hooks to parse the sci-id and then use it in 
the genpd device start/stop hooks.

Regards,
Dave

[1] http://www.spinics.net/lists/arm-kernel/msg524151.html

>
> Kevin
>

[toc] | [prev] | [next] | [standalone]

#1507468 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

Dave Gerlach <d-gerlach@ti.com> writes:

> Hi,
> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>> Dave Gerlach <d-gerlach@ti.com> writes:
>>
>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>> will hook into the genpd framework and allow the TI SCI protocol to
>>> control device power states.
>>>
>>> Also, provide macros representing each device index as understood
>>> by TI SCI to be used in the device node power-domain references.
>>> These are identifiers for the K2G devices managed by the PMMC.
>>>
>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>> ---
>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>>  MAINTAINERS                                        |  2 +
>>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>>  3 files changed, 146 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>> new file mode 100644
>>> index 000000000000..32f38a349656
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>> @@ -0,0 +1,54 @@
>>> +Texas Instruments TI-SCI Generic Power Domain
>>> +---------------------------------------------
>>> +
>>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>>> +responsible for controlling the state of the IPs that are present.
>>> +Communication between the host processor running an OS and the system
>>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>>> +implementation plugs into the generic pm domain framework and makes use of
>>> +the TI SCI protocol power on and off each device when needed.
>>> +
>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>> +
>>> +PM Domain Node
>>> +==============
>>> +The PM domain node represents the global PM domain managed by the PMMC,
>>> +which in this case is the single implementation as documented by the generic
>>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>>> +
>>> +Required Properties:
>>> +--------------------
>>> +- compatible: should be "ti,sci-pm-domain"
>>> +- #power-domain-cells: Must be 0.
>>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>>
>>> +Example:
>>> +--------------------
>>> +k2g_pds: k2g_pds {
>>
>> should use generic name like "power-contoller", e.g. k2g_pds: power-controller
>
> Ok, that makes more sense.
>
>>
>>> +        compatible = "ti,sci-pm-domain";
>>> +        #power-domain-cells = <0>;
>>> +        ti,sci = <&pmmc>;
>>> +};
>>> +
>>> +PM Domain Consumers
>>> +===================
>>> +Hardware blocks that require SCI control over their state must provide
>>> +a reference to the sci-pm-domain they are part of and a unique device
>>> +specific ID that identifies the device.
>>> +
>>> +Required Properties:
>>> +--------------------
>>> +- power-domains: phandle pointing to the corresponding PM domain node.
>>> +- ti,sci-id: index representing the device id to be passed oevr SCI to
>>> +	     be used for device control.
>>
>> This ID doesn't look right.
>>
>> Why not use #power-domain-cells = <1> and pass the index in the DT? ...
>>
>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
>>> +
>>> +Example:
>>> +--------------------
>>> +uart0: serial@02530c00 {
>>> +	compatible = "ns16550a";
>>> +	...
>>> +	power-domains = <&k2g_pds>;
>>> +	ti,sci-id = <K2G_DEV_UART0>;
>>
>> ... like this:
>>
>> 	power-domains = <&k2g_pds K2G_DEV_UART0>;
>
> That's how I did it in version one actually. I was able to define my
> own xlate function to parse the phandle and get that index, but Ulf
> pointed me to this series by Jon Hunter [1] that simplified genpd
> providers and dropped the concept of adding your own xlate. This locks
> the onecell approach to using a fixed static array of genpds that get
> indexed into (without passing the index to the provider, just the
> genpd that's looked up), which doesn't fit our usecase, as we don't
> want a 1 to 1 genpd to device mapping based on the comments provided
> in v1. Now we just use the genpd device attach/detach hooks to parse
> the sci-id and then use it in the genpd device start/stop hooks.

Ah, right.  I remember now.  This approach allows you to use a single
genpd as discussed earlier.

Makes sense now, suggestion retracted.

Kevin

[toc] | [prev] | [next] | [standalone]

#1509886 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

On Mon, Oct 24, 2016 at 12:00 PM, Kevin Hilman <khilman@baylibre.com> wrote:
> Dave Gerlach <d-gerlach@ti.com> writes:
>
>> Hi,
>> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>
>>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>>> will hook into the genpd framework and allow the TI SCI protocol to
>>>> control device power states.
>>>>
>>>> Also, provide macros representing each device index as understood
>>>> by TI SCI to be used in the device node power-domain references.
>>>> These are identifiers for the K2G devices managed by the PMMC.
>>>>
>>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>>> ---
>>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>>>  MAINTAINERS                                        |  2 +
>>>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>>>  3 files changed, 146 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>> new file mode 100644
>>>> index 000000000000..32f38a349656
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>> @@ -0,0 +1,54 @@
>>>> +Texas Instruments TI-SCI Generic Power Domain
>>>> +---------------------------------------------
>>>> +
>>>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>>>> +responsible for controlling the state of the IPs that are present.
>>>> +Communication between the host processor running an OS and the system
>>>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>>>> +implementation plugs into the generic pm domain framework and makes use of
>>>> +the TI SCI protocol power on and off each device when needed.
>>>> +
>>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>>> +
>>>> +PM Domain Node
>>>> +==============
>>>> +The PM domain node represents the global PM domain managed by the PMMC,
>>>> +which in this case is the single implementation as documented by the generic
>>>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>>>> +
>>>> +Required Properties:
>>>> +--------------------
>>>> +- compatible: should be "ti,sci-pm-domain"
>>>> +- #power-domain-cells: Must be 0.
>>>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>>>
>>>> +Example:
>>>> +--------------------
>>>> +k2g_pds: k2g_pds {
>>>
>>> should use generic name like "power-contoller", e.g. k2g_pds: power-controller
>>
>> Ok, that makes more sense.
>>
>>>
>>>> +        compatible = "ti,sci-pm-domain";
>>>> +        #power-domain-cells = <0>;
>>>> +        ti,sci = <&pmmc>;
>>>> +};
>>>> +
>>>> +PM Domain Consumers
>>>> +===================
>>>> +Hardware blocks that require SCI control over their state must provide
>>>> +a reference to the sci-pm-domain they are part of and a unique device
>>>> +specific ID that identifies the device.
>>>> +
>>>> +Required Properties:
>>>> +--------------------
>>>> +- power-domains: phandle pointing to the corresponding PM domain node.
>>>> +- ti,sci-id: index representing the device id to be passed oevr SCI to
>>>> +        be used for device control.
>>>
>>> This ID doesn't look right.
>>>
>>> Why not use #power-domain-cells = <1> and pass the index in the DT? ...

Exactly. ti,sci-id is a NAK for me.

>>>
>>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
>>>> +
>>>> +Example:
>>>> +--------------------
>>>> +uart0: serial@02530c00 {
>>>> +   compatible = "ns16550a";
>>>> +   ...
>>>> +   power-domains = <&k2g_pds>;
>>>> +   ti,sci-id = <K2G_DEV_UART0>;
>>>
>>> ... like this:
>>>
>>>      power-domains = <&k2g_pds K2G_DEV_UART0>;
>>
>> That's how I did it in version one actually. I was able to define my
>> own xlate function to parse the phandle and get that index, but Ulf
>> pointed me to this series by Jon Hunter [1] that simplified genpd
>> providers and dropped the concept of adding your own xlate. This locks
>> the onecell approach to using a fixed static array of genpds that get
>> indexed into (without passing the index to the provider, just the
>> genpd that's looked up), which doesn't fit our usecase, as we don't
>> want a 1 to 1 genpd to device mapping based on the comments provided
>> in v1. Now we just use the genpd device attach/detach hooks to parse
>> the sci-id and then use it in the genpd device start/stop hooks.

I have no idea what any of this means. All sounds like driver
architecture, not anything to do with bindings.

>
> Ah, right.  I remember now.  This approach allows you to use a single
> genpd as discussed earlier.
>
> Makes sense now, suggestion retracted.

IIRC, the bindings in Jon's case had a node for each domain and didn't
need any additional property.

Rob

[toc] | [prev] | [next] | [standalone]

#1510213 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

+Jon
On 10/26/2016 04:59 PM, Rob Herring wrote:
> On Mon, Oct 24, 2016 at 12:00 PM, Kevin Hilman <khilman@baylibre.com> wrote:
>> Dave Gerlach <d-gerlach@ti.com> writes:
>>
>>> Hi,
>>> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>
>>>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>>>> will hook into the genpd framework and allow the TI SCI protocol to
>>>>> control device power states.
>>>>>
>>>>> Also, provide macros representing each device index as understood
>>>>> by TI SCI to be used in the device node power-domain references.
>>>>> These are identifiers for the K2G devices managed by the PMMC.
>>>>>
>>>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>>>> ---
>>>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>>>>  MAINTAINERS                                        |  2 +
>>>>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>>>>  3 files changed, 146 insertions(+)
>>>>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>> new file mode 100644
>>>>> index 000000000000..32f38a349656
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>> @@ -0,0 +1,54 @@
>>>>> +Texas Instruments TI-SCI Generic Power Domain
>>>>> +---------------------------------------------
>>>>> +
>>>>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>>>>> +responsible for controlling the state of the IPs that are present.
>>>>> +Communication between the host processor running an OS and the system
>>>>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>>>>> +implementation plugs into the generic pm domain framework and makes use of
>>>>> +the TI SCI protocol power on and off each device when needed.
>>>>> +
>>>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>>>> +
>>>>> +PM Domain Node
>>>>> +==============
>>>>> +The PM domain node represents the global PM domain managed by the PMMC,
>>>>> +which in this case is the single implementation as documented by the generic
>>>>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>>>>> +
>>>>> +Required Properties:
>>>>> +--------------------
>>>>> +- compatible: should be "ti,sci-pm-domain"
>>>>> +- #power-domain-cells: Must be 0.
>>>>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>>>>
>>>>> +Example:
>>>>> +--------------------
>>>>> +k2g_pds: k2g_pds {
>>>>
>>>> should use generic name like "power-contoller", e.g. k2g_pds: power-controller
>>>
>>> Ok, that makes more sense.
>>>
>>>>
>>>>> +        compatible = "ti,sci-pm-domain";
>>>>> +        #power-domain-cells = <0>;
>>>>> +        ti,sci = <&pmmc>;
>>>>> +};
>>>>> +
>>>>> +PM Domain Consumers
>>>>> +===================
>>>>> +Hardware blocks that require SCI control over their state must provide
>>>>> +a reference to the sci-pm-domain they are part of and a unique device
>>>>> +specific ID that identifies the device.
>>>>> +
>>>>> +Required Properties:
>>>>> +--------------------
>>>>> +- power-domains: phandle pointing to the corresponding PM domain node.
>>>>> +- ti,sci-id: index representing the device id to be passed oevr SCI to
>>>>> +        be used for device control.
>>>>
>>>> This ID doesn't look right.
>>>>
>>>> Why not use #power-domain-cells = <1> and pass the index in the DT? ...
> 
> Exactly. ti,sci-id is a NAK for me.

I was told not to use the onecell during v1 discussion. I agree this would be
ideal but I cannot due to what the bindings represent, the phandle parameter is
an index into a list of genpds, whereas we need an actual ID number we can use
and I do not have the ability to get that from the phandle.

@Ulf/Jon, is there any hope of bringing back custom xlate functions for genpd
providers? I don't have a good background on why it was even removed. I can
maintain a single genpd for all devices but I need a way to parse this ID,
whether it's from a separate property or a phandle. It is locked now to indexing
into a list of genpds but I need additional per device information for devices
bound to a genpd and I need either a custom parameter or the ability to parse
the phandle myself.

> 
>>>>
>>>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
>>>>> +
>>>>> +Example:
>>>>> +--------------------
>>>>> +uart0: serial@02530c00 {
>>>>> +   compatible = "ns16550a";
>>>>> +   ...
>>>>> +   power-domains = <&k2g_pds>;
>>>>> +   ti,sci-id = <K2G_DEV_UART0>;
>>>>
>>>> ... like this:
>>>>
>>>>      power-domains = <&k2g_pds K2G_DEV_UART0>;
>>>
>>> That's how I did it in version one actually. I was able to define my
>>> own xlate function to parse the phandle and get that index, but Ulf
>>> pointed me to this series by Jon Hunter [1] that simplified genpd
>>> providers and dropped the concept of adding your own xlate. This locks
>>> the onecell approach to using a fixed static array of genpds that get
>>> indexed into (without passing the index to the provider, just the
>>> genpd that's looked up), which doesn't fit our usecase, as we don't
>>> want a 1 to 1 genpd to device mapping based on the comments provided
>>> in v1. Now we just use the genpd device attach/detach hooks to parse
>>> the sci-id and then use it in the genpd device start/stop hooks.
> 
> I have no idea what any of this means. All sounds like driver
> architecture, not anything to do with bindings.

This was a response to Kevin, not part of binding description.

> 
>>
>> Ah, right.  I remember now.  This approach allows you to use a single
>> genpd as discussed earlier.
>>
>> Makes sense now, suggestion retracted.
> 
> IIRC, the bindings in Jon's case had a node for each domain and didn't
> need any additional property.

Yes but we only have one domain and index into it, not into a list of domains,
so the additional property is solving a different problem.

Regards,
Dave

> 
> Rob
> 

[toc] | [prev] | [next] | [standalone]

#1519366 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

Rob, Ulf, Jon,
On 10/27/2016 08:15 AM, Dave Gerlach wrote:
> +Jon
> On 10/26/2016 04:59 PM, Rob Herring wrote:
>> On Mon, Oct 24, 2016 at 12:00 PM, Kevin Hilman <khilman@baylibre.com> wrote:
>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>
>>>> Hi,
>>>> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>>
>>>>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>>>>> will hook into the genpd framework and allow the TI SCI protocol to
>>>>>> control device power states.
>>>>>>
>>>>>> Also, provide macros representing each device index as understood
>>>>>> by TI SCI to be used in the device node power-domain references.
>>>>>> These are identifiers for the K2G devices managed by the PMMC.
>>>>>>
>>>>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>>>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>>>>> ---
>>>>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>>>>>  MAINTAINERS                                        |  2 +
>>>>>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>>>>>  3 files changed, 146 insertions(+)
>>>>>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>> new file mode 100644
>>>>>> index 000000000000..32f38a349656
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>> @@ -0,0 +1,54 @@
>>>>>> +Texas Instruments TI-SCI Generic Power Domain
>>>>>> +---------------------------------------------
>>>>>> +
>>>>>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>>>>>> +responsible for controlling the state of the IPs that are present.
>>>>>> +Communication between the host processor running an OS and the system
>>>>>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>>>>>> +implementation plugs into the generic pm domain framework and makes use of
>>>>>> +the TI SCI protocol power on and off each device when needed.
>>>>>> +
>>>>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>>>>> +
>>>>>> +PM Domain Node
>>>>>> +==============
>>>>>> +The PM domain node represents the global PM domain managed by the PMMC,
>>>>>> +which in this case is the single implementation as documented by the generic
>>>>>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>>>>>> +
>>>>>> +Required Properties:
>>>>>> +--------------------
>>>>>> +- compatible: should be "ti,sci-pm-domain"
>>>>>> +- #power-domain-cells: Must be 0.
>>>>>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>>>>>
>>>>>> +Example:
>>>>>> +--------------------
>>>>>> +k2g_pds: k2g_pds {
>>>>>
>>>>> should use generic name like "power-contoller", e.g. k2g_pds: power-controller
>>>>
>>>> Ok, that makes more sense.
>>>>
>>>>>
>>>>>> +        compatible = "ti,sci-pm-domain";
>>>>>> +        #power-domain-cells = <0>;
>>>>>> +        ti,sci = <&pmmc>;
>>>>>> +};
>>>>>> +
>>>>>> +PM Domain Consumers
>>>>>> +===================
>>>>>> +Hardware blocks that require SCI control over their state must provide
>>>>>> +a reference to the sci-pm-domain they are part of and a unique device
>>>>>> +specific ID that identifies the device.
>>>>>> +
>>>>>> +Required Properties:
>>>>>> +--------------------
>>>>>> +- power-domains: phandle pointing to the corresponding PM domain node.
>>>>>> +- ti,sci-id: index representing the device id to be passed oevr SCI to
>>>>>> +        be used for device control.
>>>>>
>>>>> This ID doesn't look right.
>>>>>
>>>>> Why not use #power-domain-cells = <1> and pass the index in the DT? ...
>>
>> Exactly. ti,sci-id is a NAK for me.
>
> I was told not to use the onecell during v1 discussion. I agree this would be
> ideal but I cannot due to what the bindings represent, the phandle parameter is
> an index into a list of genpds, whereas we need an actual ID number we can use
> and I do not have the ability to get that from the phandle.
>
> @Ulf/Jon, is there any hope of bringing back custom xlate functions for genpd
> providers? I don't have a good background on why it was even removed. I can
> maintain a single genpd for all devices but I need a way to parse this ID,
> whether it's from a separate property or a phandle. It is locked now to indexing
> into a list of genpds but I need additional per device information for devices
> bound to a genpd and I need either a custom parameter or the ability to parse
> the phandle myself.
>

Any comments here? The meaning of the phandle onecell is fixed in the 
genpd framework so I'm not sure how we want to move forward with this, I 
need to pass a power domain ID to the genpd driver, and if this 
shouldn't be a new property I'm not sure what direction we should take.

Regards,
Dave

>>
>>>>>
>>>>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
>>>>>> +
>>>>>> +Example:
>>>>>> +--------------------
>>>>>> +uart0: serial@02530c00 {
>>>>>> +   compatible = "ns16550a";
>>>>>> +   ...
>>>>>> +   power-domains = <&k2g_pds>;
>>>>>> +   ti,sci-id = <K2G_DEV_UART0>;
>>>>>
>>>>> ... like this:
>>>>>
>>>>>      power-domains = <&k2g_pds K2G_DEV_UART0>;
>>>>
>>>> That's how I did it in version one actually. I was able to define my
>>>> own xlate function to parse the phandle and get that index, but Ulf
>>>> pointed me to this series by Jon Hunter [1] that simplified genpd
>>>> providers and dropped the concept of adding your own xlate. This locks
>>>> the onecell approach to using a fixed static array of genpds that get
>>>> indexed into (without passing the index to the provider, just the
>>>> genpd that's looked up), which doesn't fit our usecase, as we don't
>>>> want a 1 to 1 genpd to device mapping based on the comments provided
>>>> in v1. Now we just use the genpd device attach/detach hooks to parse
>>>> the sci-id and then use it in the genpd device start/stop hooks.
>>
>> I have no idea what any of this means. All sounds like driver
>> architecture, not anything to do with bindings.
>
> This was a response to Kevin, not part of binding description.
>
>>
>>>
>>> Ah, right.  I remember now.  This approach allows you to use a single
>>> genpd as discussed earlier.
>>>
>>> Makes sense now, suggestion retracted.
>>
>> IIRC, the bindings in Jon's case had a node for each domain and didn't
>> need any additional property.
>
> Yes but we only have one domain and index into it, not into a list of domains,
> so the additional property is solving a different problem.
>
> Regards,
> Dave
>
>>
>> Rob
>>
>

[toc] | [prev] | [next] | [standalone]

#1519775 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

On 10 November 2016 at 20:56, Dave Gerlach <d-gerlach@ti.com> wrote:
> Rob, Ulf, Jon,
>
> On 10/27/2016 08:15 AM, Dave Gerlach wrote:
>>
>> +Jon
>> On 10/26/2016 04:59 PM, Rob Herring wrote:
>>>
>>> On Mon, Oct 24, 2016 at 12:00 PM, Kevin Hilman <khilman@baylibre.com>
>>> wrote:
>>>>
>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>
>>>>> Hi,
>>>>> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>>>>>>
>>>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>>>
>>>>>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>>>>>> will hook into the genpd framework and allow the TI SCI protocol to
>>>>>>> control device power states.
>>>>>>>
>>>>>>> Also, provide macros representing each device index as understood
>>>>>>> by TI SCI to be used in the device node power-domain references.
>>>>>>> These are identifiers for the K2G devices managed by the PMMC.
>>>>>>>
>>>>>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>>>>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>>>>>> ---
>>>>>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54
>>>>>>> +++++++++++++
>>>>>>>  MAINTAINERS                                        |  2 +
>>>>>>>  include/dt-bindings/genpd/k2g.h                    | 90
>>>>>>> ++++++++++++++++++++++
>>>>>>>  3 files changed, 146 insertions(+)
>>>>>>>  create mode 100644
>>>>>>> Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>>>>>
>>>>>>> diff --git
>>>>>>> a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..32f38a349656
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> @@ -0,0 +1,54 @@
>>>>>>> +Texas Instruments TI-SCI Generic Power Domain
>>>>>>> +---------------------------------------------
>>>>>>> +
>>>>>>> +Some TI SoCs contain a system controller (like the PMMC, etc...)
>>>>>>> that is
>>>>>>> +responsible for controlling the state of the IPs that are present.
>>>>>>> +Communication between the host processor running an OS and the
>>>>>>> system
>>>>>>> +controller happens through a protocol known as TI-SCI [1]. This pm
>>>>>>> domain
>>>>>>> +implementation plugs into the generic pm domain framework and makes
>>>>>>> use of
>>>>>>> +the TI SCI protocol power on and off each device when needed.
>>>>>>> +
>>>>>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>>>>>> +
>>>>>>> +PM Domain Node
>>>>>>> +==============
>>>>>>> +The PM domain node represents the global PM domain managed by the
>>>>>>> PMMC,
>>>>>>> +which in this case is the single implementation as documented by the
>>>>>>> generic
>>>>>>> +PM domain bindings in
>>>>>>> Documentation/devicetree/bindings/power/power_domain.txt.
>>>>>>> +
>>>>>>> +Required Properties:
>>>>>>> +--------------------
>>>>>>> +- compatible: should be "ti,sci-pm-domain"
>>>>>>> +- #power-domain-cells: Must be 0.
>>>>>>> +- ti,sci: Phandle to the TI SCI device to use for managing the
>>>>>>> devices.
>>>>>>>
>>>>>>> +Example:
>>>>>>> +--------------------
>>>>>>> +k2g_pds: k2g_pds {
>>>>>>
>>>>>>
>>>>>> should use generic name like "power-contoller", e.g. k2g_pds:
>>>>>> power-controller
>>>>>
>>>>>
>>>>> Ok, that makes more sense.
>>>>>
>>>>>>
>>>>>>> +        compatible = "ti,sci-pm-domain";
>>>>>>> +        #power-domain-cells = <0>;
>>>>>>> +        ti,sci = <&pmmc>;
>>>>>>> +};
>>>>>>> +
>>>>>>> +PM Domain Consumers
>>>>>>> +===================
>>>>>>> +Hardware blocks that require SCI control over their state must
>>>>>>> provide
>>>>>>> +a reference to the sci-pm-domain they are part of and a unique
>>>>>>> device
>>>>>>> +specific ID that identifies the device.
>>>>>>> +
>>>>>>> +Required Properties:
>>>>>>> +--------------------
>>>>>>> +- power-domains: phandle pointing to the corresponding PM domain
>>>>>>> node.
>>>>>>> +- ti,sci-id: index representing the device id to be passed oevr SCI
>>>>>>> to
>>>>>>> +        be used for device control.
>>>>>>
>>>>>>
>>>>>> This ID doesn't look right.
>>>>>>
>>>>>> Why not use #power-domain-cells = <1> and pass the index in the DT?
>>>>>> ...
>>>
>>>
>>> Exactly. ti,sci-id is a NAK for me.
>>
>>
>> I was told not to use the onecell during v1 discussion. I agree this would
>> be
>> ideal but I cannot due to what the bindings represent, the phandle
>> parameter is
>> an index into a list of genpds, whereas we need an actual ID number we can
>> use
>> and I do not have the ability to get that from the phandle.
>>
>> @Ulf/Jon, is there any hope of bringing back custom xlate functions for
>> genpd
>> providers? I don't have a good background on why it was even removed. I
>> can
>> maintain a single genpd for all devices but I need a way to parse this ID,
>> whether it's from a separate property or a phandle. It is locked now to
>> indexing
>> into a list of genpds but I need additional per device information for
>> devices
>> bound to a genpd and I need either a custom parameter or the ability to
>> parse
>> the phandle myself.
>>
>
> Any comments here? The meaning of the phandle onecell is fixed in the genpd
> framework so I'm not sure how we want to move forward with this, I need to
> pass a power domain ID to the genpd driver, and if this shouldn't be a new
> property I'm not sure what direction we should take.
>
> Regards,
> Dave
>
>
>>>
>>>>>>
>>>>>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for
>>>>>>> k2g.
>>>>>>> +
>>>>>>> +Example:
>>>>>>> +--------------------
>>>>>>> +uart0: serial@02530c00 {
>>>>>>> +   compatible = "ns16550a";
>>>>>>> +   ...
>>>>>>> +   power-domains = <&k2g_pds>;
>>>>>>> +   ti,sci-id = <K2G_DEV_UART0>;
>>>>>>
>>>>>>
>>>>>> ... like this:
>>>>>>
>>>>>>      power-domains = <&k2g_pds K2G_DEV_UART0>;
>>>>>
>>>>>
>>>>> That's how I did it in version one actually. I was able to define my
>>>>> own xlate function to parse the phandle and get that index, but Ulf
>>>>> pointed me to this series by Jon Hunter [1] that simplified genpd
>>>>> providers and dropped the concept of adding your own xlate. This locks
>>>>> the onecell approach to using a fixed static array of genpds that get
>>>>> indexed into (without passing the index to the provider, just the
>>>>> genpd that's looked up), which doesn't fit our usecase, as we don't
>>>>> want a 1 to 1 genpd to device mapping based on the comments provided
>>>>> in v1. Now we just use the genpd device attach/detach hooks to parse
>>>>> the sci-id and then use it in the genpd device start/stop hooks.
>>>
>>>
>>> I have no idea what any of this means. All sounds like driver
>>> architecture, not anything to do with bindings.
>>
>>
>> This was a response to Kevin, not part of binding description.
>>
>>>
>>>>
>>>> Ah, right.  I remember now.  This approach allows you to use a single
>>>> genpd as discussed earlier.
>>>>
>>>> Makes sense now, suggestion retracted.
>>>
>>>
>>> IIRC, the bindings in Jon's case had a node for each domain and didn't
>>> need any additional property.
>>
>>
>> Yes but we only have one domain and index into it, not into a list of
>> domains,

Exactly. And this my main point as well. We are not talking about a
domain property but a device property.

>> so the additional property is solving a different problem.

Yes.

Perhaps you could try to elaborate about what the TI SCI ID really
represents for the device, as to help Rob understand the bigger
picture?

To me, the TI SCI ID, is similar to a "conid" for any another "device
resource" (like clock, pinctrl, regulator etc) which we can describe
in DT and assign to a device node. The only difference here, is that
we don't have common API to fetch the resource (like clk_get(),
regulator_get()), but instead we fetches the device's resource from
SoC specific code, via genpd's device ->attach() callback.

Hope that helps.

Kind regards
Uffe

[toc] | [prev] | [next] | [standalone]

#1509920 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

On Wed, Oct 19, 2016 at 03:33:45PM -0500, Dave Gerlach wrote:
> Add a generic power domain implementation, TI SCI PM Domains, that
> will hook into the genpd framework and allow the TI SCI protocol to
> control device power states.
> 
> Also, provide macros representing each device index as understood
> by TI SCI to be used in the device node power-domain references.
> These are identifiers for the K2G devices managed by the PMMC.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> ---
>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>  MAINTAINERS                                        |  2 +
>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>  3 files changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>  create mode 100644 include/dt-bindings/genpd/k2g.h
> 
> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> new file mode 100644
> index 000000000000..32f38a349656
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> @@ -0,0 +1,54 @@
> +Texas Instruments TI-SCI Generic Power Domain
> +---------------------------------------------
> +
> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
> +responsible for controlling the state of the IPs that are present.
> +Communication between the host processor running an OS and the system
> +controller happens through a protocol known as TI-SCI [1]. This pm domain
> +implementation plugs into the generic pm domain framework and makes use of
> +the TI SCI protocol power on and off each device when needed.
> +
> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
> +
> +PM Domain Node
> +==============
> +The PM domain node represents the global PM domain managed by the PMMC,
> +which in this case is the single implementation as documented by the generic
> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
> +
> +Required Properties:
> +--------------------
> +- compatible: should be "ti,sci-pm-domain"
> +- #power-domain-cells: Must be 0.
> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
> +
> +Example:
> +--------------------
> +k2g_pds: k2g_pds {
> +        compatible = "ti,sci-pm-domain";
> +        #power-domain-cells = <0>;
> +        ti,sci = <&pmmc>;
> +};

Why not just make the PMMC node be the power-domain provider itself? If 
not that, then make this a child node of it. The same comment applies to 
all the SCI functions, but I guess I've already acked some of them. 

I really don't like reviewing all these TI SCI bindings one by one. Each 
one on its own seems fine, but I don't see the full picture.

Rob

[toc] | [prev] | [next] | [standalone]

#1510216 — Re: [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains

On 10/27/2016 04:02 AM, Tero Kristo wrote:
> On 27/10/16 01:04, Rob Herring wrote:
>> On Wed, Oct 19, 2016 at 03:33:45PM -0500, Dave Gerlach wrote:
>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>> will hook into the genpd framework and allow the TI SCI protocol to
>>> control device power states.
>>>
>>> Also, provide macros representing each device index as understood
>>> by TI SCI to be used in the device node power-domain references.
>>> These are identifiers for the K2G devices managed by the PMMC.
>>>
>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>> ---
>>>  .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 54 +++++++++++++
>>>  MAINTAINERS                                        |  2 +
>>>  include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
>>>  3 files changed, 146 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>  create mode 100644 include/dt-bindings/genpd/k2g.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>> b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>> new file mode 100644
>>> index 000000000000..32f38a349656
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>> @@ -0,0 +1,54 @@
>>> +Texas Instruments TI-SCI Generic Power Domain
>>> +---------------------------------------------
>>> +
>>> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
>>> +responsible for controlling the state of the IPs that are present.
>>> +Communication between the host processor running an OS and the system
>>> +controller happens through a protocol known as TI-SCI [1]. This pm domain
>>> +implementation plugs into the generic pm domain framework and makes use of
>>> +the TI SCI protocol power on and off each device when needed.
>>> +
>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>> +
>>> +PM Domain Node
>>> +==============
>>> +The PM domain node represents the global PM domain managed by the PMMC,
>>> +which in this case is the single implementation as documented by the generic
>>> +PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
>>> +
>>> +Required Properties:
>>> +--------------------
>>> +- compatible: should be "ti,sci-pm-domain"
>>> +- #power-domain-cells: Must be 0.
>>> +- ti,sci: Phandle to the TI SCI device to use for managing the devices.
>>> +
>>> +Example:
>>> +--------------------
>>> +k2g_pds: k2g_pds {
>>> +        compatible = "ti,sci-pm-domain";
>>> +        #power-domain-cells = <0>;
>>> +        ti,sci = <&pmmc>;
>>> +};
>>
>> Why not just make the PMMC node be the power-domain provider itself? If
>> not that, then make this a child node of it. The same comment applies to
>> all the SCI functions, but I guess I've already acked some of them.
> 
> This seems to be a bug in this documentation actually. ti,sci handle is no
> longer supported, and all the sci stuff must be under the parent sci node.
> 
>>
>> I really don't like reviewing all these TI SCI bindings one by one. Each
>> one on its own seems fine, but I don't see the full picture.
> 
> The full picture is represented under the documentation for the main protocol
> support itself. See this patch:
> 
> https://patchwork.kernel.org/patch/9383281/
> 
> Copy pasted here as ref:
> 
> Example (K2G):
> -------------
>         pmmc: pmmc {
>                 compatible = "ti,k2g-sci";
>                 ...
> 
>                 my_clk_node: clk_node {
>                         ...
>                         ...
>                 };
> 
>                 my_pd_node: pd_node {
>                         ...
>                         ...
>                 };
>         };
> 
> 

Yes my bad I will fix this in V3 once we straighten out the ID portion of the
binding.

Regards,
Dave

[toc] | [prev] | [next] | [standalone]

#1504323 — [PATCH v2 1/4] PM / Domains: Add generic data pointer to genpd data struct

Add a void *data pointer to struct generic_pm_domain_data. Because this
exists for each device associated with a genpd it will allow us to
assign per-device data if needed on a platform for control of that
specific device.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 include/linux/pm_domain.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a09fe5c009c8..9c0a897fe605 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -105,6 +105,7 @@ struct generic_pm_domain_data {
 	struct pm_domain_data base;
 	struct gpd_timing_data td;
 	struct notifier_block nb;
+	void *data;
 };
 
 #ifdef CONFIG_PM_GENERIC_DOMAINS
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1508130 — Re: [PATCH v2 1/4] PM / Domains: Add generic data pointer to genpd data struct

On 19 October 2016 at 22:33, Dave Gerlach <d-gerlach@ti.com> wrote:
> Add a void *data pointer to struct generic_pm_domain_data. Because this
> exists for each device associated with a genpd it will allow us to
> assign per-device data if needed on a platform for control of that
> specific device.
>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
>  include/linux/pm_domain.h | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
> index a09fe5c009c8..9c0a897fe605 100644
> --- a/include/linux/pm_domain.h
> +++ b/include/linux/pm_domain.h
> @@ -105,6 +105,7 @@ struct generic_pm_domain_data {
>         struct pm_domain_data base;
>         struct gpd_timing_data td;
>         struct notifier_block nb;
> +       void *data;
>  };
>
>  #ifdef CONFIG_PM_GENERIC_DOMAINS
> --
> 2.9.3
>

[toc] | [prev] | [next] | [standalone]

#1504324 — [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver

Introduce a ti_sci_pm_domains driver to act as a generic pm domain provider
to allow each device to attach and associate it's ti-sci-id so that it can
be controlled through the TI SCI protocol.

This driver implements a simple genpd where each device node has
a phandle to the power domain node and also must provide an index which
represents the ID to be passed with TI SCI representing the device using a
ti,sci-id property. Through this interface the genpd dev_ops start and
stop hooks will use TI SCI to turn on and off each device as determined
by pm_runtime usage.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 MAINTAINERS                        |   1 +
 arch/arm/mach-keystone/Kconfig     |   1 +
 drivers/soc/ti/Kconfig             |  12 +++
 drivers/soc/ti/Makefile            |   1 +
 drivers/soc/ti/ti_sci_pm_domains.c | 198 +++++++++++++++++++++++++++++++++++++
 5 files changed, 213 insertions(+)
 create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d894873c2bff..3eaac5ede847 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11894,6 +11894,7 @@ F:	drivers/firmware/ti_sci*
 F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
+F:	drivers/soc/ti/ti_sci_pm_domains.c
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 24bd64dabdfc..18d49465cafb 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -9,6 +9,7 @@ config ARCH_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 3557c5e32a93..39e152abe6b9 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -38,4 +38,16 @@ config WKUP_M3_IPC
 	  to communicate and use the Wakeup M3 for PM features like suspend
 	  resume and boots it using wkup_m3_rproc driver.
 
+config TI_SCI_PM_DOMAINS
+	tristate "TI SCI PM Domains Driver"
+	depends on TI_SCI_PROTOCOL
+	depends on PM_GENERIC_DOMAINS
+	help
+	  Generic power domain implementation for TI device implementing
+	  the TI SCI protocol.
+
+	  To compile this as a module, choose M here. The module will be
+	  called ti_sci_pm_domains. Note this is needed early in boot before
+	  rootfs may be available.
+
 endif # SOC_TI
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 48ff3a79634f..7d572736c86e 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
+obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
new file mode 100644
index 000000000000..ec76215d64c7
--- /dev/null
+++ b/drivers/soc/ti/ti_sci_pm_domains.c
@@ -0,0 +1,198 @@
+/*
+ * TI SCI Generic Power Domain Driver
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *	J Keerthy <j-keerthy@ti.com>
+ *	Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_genpd_dev_data: holds data needed for every device attached
+ *				 to this genpd
+ * @idx: index of the device that identifies it with the system
+ *	 control processor.
+ */
+struct ti_sci_genpd_dev_data {
+	int idx;
+};
+
+/**
+ * struct ti_sci_pm_domain: TI specific data needed for power domain
+ * @ti_sci: handle to TI SCI protocol driver that provides ops to
+ *	    communicate with system control processor.
+ * @dev: pointer to dev for the driver for devm allocs
+ * @pd: generic_pm_domain for use with the genpd framework
+ */
+struct ti_sci_pm_domain {
+	const struct ti_sci_handle *ti_sci;
+	struct device *dev;
+	struct generic_pm_domain pd;
+};
+
+#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
+
+/**
+ * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns device_id stored from ti,sci_id property
+ */
+static int ti_sci_dev_id(struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	return sci_dev_data->idx;
+}
+
+/**
+ * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns ti_sci_handle to be used to communicate with system
+ *	   control processor.
+ */
+static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
+{
+	struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
+
+	return ti_sci_genpd->ti_sci;
+}
+
+/**
+ * ti_sci_dev_start(): genpd device start hook called to turn device on
+ * @dev: pointer to device associated with this genpd to be powered on
+ */
+static int ti_sci_dev_start(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+}
+
+/**
+ * ti_sci_dev_stop(): genpd device stop hook called to turn device off
+ * @dev: pointer to device associated with this genpd to be powered off
+ */
+static int ti_sci_dev_stop(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
+}
+
+static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
+				struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
+	const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
+	struct ti_sci_genpd_dev_data *sci_dev_data;
+	struct generic_pm_domain_data *genpd_data;
+	int idx, ret = 0;
+
+	ret = of_property_read_u32(np, "ti,sci-id", &idx);
+	if (ret) {
+		dev_err(ti_sci_genpd->dev, "Cannot find ti,sci-id for %s\n",
+			dev_name(dev));
+		return -ENODEV;
+	}
+
+	/*
+	 * Check the validity of the requested idx, if the index is not valid
+	 * the PMMC will return a NAK here and we will not allocate it.
+	 */
+	ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
+	if (ret)
+		return -EINVAL;
+
+	sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
+	if (!sci_dev_data)
+		return -ENOMEM;
+
+	sci_dev_data->idx = idx;
+
+	genpd_data = dev_gpd_data(dev);
+	genpd_data->data = sci_dev_data;
+
+	return 0;
+}
+
+static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
+				 struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	kfree(sci_dev_data);
+	genpd_data->data = NULL;
+}
+
+static const struct of_device_id ti_sci_pm_domain_matches[] = {
+	{ .compatible = "ti,sci-pm-domain", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
+
+static int ti_sci_pm_domain_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ti_sci_pm_domain *ti_sci_pd;
+	int ret;
+
+	ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
+	if (!ti_sci_pd)
+		return -ENOMEM;
+
+	ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
+	if (IS_ERR(ti_sci_pd->ti_sci))
+		return PTR_ERR(ti_sci_pd->ti_sci);
+
+	ti_sci_pd->dev = dev;
+
+	ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
+	ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
+
+	ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
+	ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
+
+	pm_genpd_init(&ti_sci_pd->pd, NULL, true);
+
+	ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
+
+	return ret;
+}
+
+static struct platform_driver ti_sci_pm_domains_driver = {
+	.probe = ti_sci_pm_domain_probe,
+	.driver = {
+		.name = "ti_sci_pm_domains",
+		.of_match_table = ti_sci_pm_domain_matches,
+	},
+};
+module_platform_driver(ti_sci_pm_domains_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface (SCI) Power Domain driver");
+MODULE_AUTHOR("Dave Gerlach");
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1506236 — Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver

Dave Gerlach <d-gerlach@ti.com> writes:

> Introduce a ti_sci_pm_domains driver to act as a generic pm domain provider
> to allow each device to attach and associate it's ti-sci-id so that it can
> be controlled through the TI SCI protocol.
>
> This driver implements a simple genpd where each device node has
> a phandle to the power domain node and also must provide an index which
> represents the ID to be passed with TI SCI representing the device using a
> ti,sci-id property. Through this interface the genpd dev_ops start and
> stop hooks will use TI SCI to turn on and off each device as determined
> by pm_runtime usage.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> ---
>  MAINTAINERS                        |   1 +
>  arch/arm/mach-keystone/Kconfig     |   1 +
>  drivers/soc/ti/Kconfig             |  12 +++
>  drivers/soc/ti/Makefile            |   1 +
>  drivers/soc/ti/ti_sci_pm_domains.c | 198 +++++++++++++++++++++++++++++++++++++
>  5 files changed, 213 insertions(+)
>  create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d894873c2bff..3eaac5ede847 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11894,6 +11894,7 @@ F:	drivers/firmware/ti_sci*
>  F:	include/linux/soc/ti/ti_sci_protocol.h
>  F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>  F:	include/dt-bindings/genpd/k2g.h
> +F:	drivers/soc/ti/ti_sci_pm_domains.c
>  
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>
> diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
> index 24bd64dabdfc..18d49465cafb 100644
> --- a/arch/arm/mach-keystone/Kconfig
> +++ b/arch/arm/mach-keystone/Kconfig
> @@ -9,6 +9,7 @@ config ARCH_KEYSTONE
>  	select ARCH_SUPPORTS_BIG_ENDIAN
>  	select ZONE_DMA if ARM_LPAE
>  	select PINCTRL
> +	select PM_GENERIC_DOMAINS if PM
>  	help
>  	  Support for boards based on the Texas Instruments Keystone family of
>  	  SoCs.
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index 3557c5e32a93..39e152abe6b9 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -38,4 +38,16 @@ config WKUP_M3_IPC
>  	  to communicate and use the Wakeup M3 for PM features like suspend
>  	  resume and boots it using wkup_m3_rproc driver.
>  
> +config TI_SCI_PM_DOMAINS
> +	tristate "TI SCI PM Domains Driver"
> +	depends on TI_SCI_PROTOCOL
> +	depends on PM_GENERIC_DOMAINS
> +	help
> +	  Generic power domain implementation for TI device implementing
> +	  the TI SCI protocol.
> +
> +	  To compile this as a module, choose M here. The module will be
> +	  called ti_sci_pm_domains. Note this is needed early in boot before
> +	  rootfs may be available.
> +
>  endif # SOC_TI
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index 48ff3a79634f..7d572736c86e 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -5,3 +5,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
>  knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
>  obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
>  obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
> +obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
> diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
> new file mode 100644
> index 000000000000..ec76215d64c7
> --- /dev/null
> +++ b/drivers/soc/ti/ti_sci_pm_domains.c
> @@ -0,0 +1,198 @@
> +/*
> + * TI SCI Generic Power Domain Driver
> + *
> + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
> + *	J Keerthy <j-keerthy@ti.com>
> + *	Dave Gerlach <d-gerlach@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/slab.h>
> +#include <linux/soc/ti/ti_sci_protocol.h>
> +
> +/**
> + * struct ti_sci_genpd_dev_data: holds data needed for every device attached
> + *				 to this genpd
> + * @idx: index of the device that identifies it with the system
> + *	 control processor.
> + */
> +struct ti_sci_genpd_dev_data {
> +	int idx;
> +};

If you use #power-domain-cells = <1>, you can drop this...

> +/**
> + * struct ti_sci_pm_domain: TI specific data needed for power domain
> + * @ti_sci: handle to TI SCI protocol driver that provides ops to
> + *	    communicate with system control processor.
> + * @dev: pointer to dev for the driver for devm allocs
> + * @pd: generic_pm_domain for use with the genpd framework
> + */
> +struct ti_sci_pm_domain {
> +	const struct ti_sci_handle *ti_sci;
> +	struct device *dev;
> +	struct generic_pm_domain pd;
> +};

and add and 'idx' field to this which is populated on attach.

Thank you shouldn't need PATCH 1/4 which adds the new 'void * data'.

Otherwise, the driver looks pretty straight forward.

BTW, what is the the status of the TI-SCI protocol drivers themselves?
This can't be merged until that is or this won't even compile.

Kevin

[toc] | [prev] | [next] | [standalone]

#1506237 — Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver

On 10/21/2016 12:00 PM, Kevin Hilman wrote:
> Dave Gerlach <d-gerlach@ti.com> writes:
>
[...]

>
> BTW, what is the the status of the TI-SCI protocol drivers themselves?
> This can't be merged until that is or this won't even compile.
>
I was just about to ask the same question.

Regards,
Santosh

[toc] | [prev] | [next] | [standalone]

#1506240 — Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver

On 10/21/2016 02:02 PM, Santosh Shilimkar wrote:
> On 10/21/2016 12:00 PM, Kevin Hilman wrote:
>> Dave Gerlach <d-gerlach@ti.com> writes:
>>
> [...]
>
>>
>> BTW, what is the the status of the TI-SCI protocol drivers themselves?
>> This can't be merged until that is or this won't even compile.
>>
> I was just about to ask the same question.

v4 was sent here which was just a rebase of v3 on v4.9-rc1 with no 
changes: http://www.spinics.net/lists/arm-kernel/msg536851.html

Should be ready to merge, just was too late during v4.8 cycle.

Regards,
Dave

>
> Regards,
> Santosh
>

[toc] | [prev] | [next] | [standalone]

#1508127 — Re: [PATCH v2 3/4] soc: ti: Add ti_sci_pm_domains driver

On 19 October 2016 at 22:33, Dave Gerlach <d-gerlach@ti.com> wrote:
> Introduce a ti_sci_pm_domains driver to act as a generic pm domain provider
> to allow each device to attach and associate it's ti-sci-id so that it can
> be controlled through the TI SCI protocol.
>
> This driver implements a simple genpd where each device node has
> a phandle to the power domain node and also must provide an index which
> represents the ID to be passed with TI SCI representing the device using a
> ti,sci-id property. Through this interface the genpd dev_ops start and
> stop hooks will use TI SCI to turn on and off each device as determined
> by pm_runtime usage.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

Looks good!

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
>  MAINTAINERS                        |   1 +
>  arch/arm/mach-keystone/Kconfig     |   1 +
>  drivers/soc/ti/Kconfig             |  12 +++
>  drivers/soc/ti/Makefile            |   1 +
>  drivers/soc/ti/ti_sci_pm_domains.c | 198 +++++++++++++++++++++++++++++++++++++
>  5 files changed, 213 insertions(+)
>  create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d894873c2bff..3eaac5ede847 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11894,6 +11894,7 @@ F:      drivers/firmware/ti_sci*
>  F:     include/linux/soc/ti/ti_sci_protocol.h
>  F:     Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>  F:     include/dt-bindings/genpd/k2g.h
> +F:     drivers/soc/ti/ti_sci_pm_domains.c
>
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:     Hans Verkuil <hverkuil@xs4all.nl>
> diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
> index 24bd64dabdfc..18d49465cafb 100644
> --- a/arch/arm/mach-keystone/Kconfig
> +++ b/arch/arm/mach-keystone/Kconfig
> @@ -9,6 +9,7 @@ config ARCH_KEYSTONE
>         select ARCH_SUPPORTS_BIG_ENDIAN
>         select ZONE_DMA if ARM_LPAE
>         select PINCTRL
> +       select PM_GENERIC_DOMAINS if PM
>         help
>           Support for boards based on the Texas Instruments Keystone family of
>           SoCs.
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index 3557c5e32a93..39e152abe6b9 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -38,4 +38,16 @@ config WKUP_M3_IPC
>           to communicate and use the Wakeup M3 for PM features like suspend
>           resume and boots it using wkup_m3_rproc driver.
>
> +config TI_SCI_PM_DOMAINS
> +       tristate "TI SCI PM Domains Driver"
> +       depends on TI_SCI_PROTOCOL
> +       depends on PM_GENERIC_DOMAINS
> +       help
> +         Generic power domain implementation for TI device implementing
> +         the TI SCI protocol.
> +
> +         To compile this as a module, choose M here. The module will be
> +         called ti_sci_pm_domains. Note this is needed early in boot before
> +         rootfs may be available.
> +
>  endif # SOC_TI
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index 48ff3a79634f..7d572736c86e 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -5,3 +5,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)   += knav_qmss.o
>  knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
>  obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)   += knav_dma.o
>  obj-$(CONFIG_WKUP_M3_IPC)              += wkup_m3_ipc.o
> +obj-$(CONFIG_TI_SCI_PM_DOMAINS)                += ti_sci_pm_domains.o
> diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
> new file mode 100644
> index 000000000000..ec76215d64c7
> --- /dev/null
> +++ b/drivers/soc/ti/ti_sci_pm_domains.c
> @@ -0,0 +1,198 @@
> +/*
> + * TI SCI Generic Power Domain Driver
> + *
> + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
> + *     J Keerthy <j-keerthy@ti.com>
> + *     Dave Gerlach <d-gerlach@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/slab.h>
> +#include <linux/soc/ti/ti_sci_protocol.h>
> +
> +/**
> + * struct ti_sci_genpd_dev_data: holds data needed for every device attached
> + *                              to this genpd
> + * @idx: index of the device that identifies it with the system
> + *      control processor.
> + */
> +struct ti_sci_genpd_dev_data {
> +       int idx;
> +};
> +
> +/**
> + * struct ti_sci_pm_domain: TI specific data needed for power domain
> + * @ti_sci: handle to TI SCI protocol driver that provides ops to
> + *         communicate with system control processor.
> + * @dev: pointer to dev for the driver for devm allocs
> + * @pd: generic_pm_domain for use with the genpd framework
> + */
> +struct ti_sci_pm_domain {
> +       const struct ti_sci_handle *ti_sci;
> +       struct device *dev;
> +       struct generic_pm_domain pd;
> +};
> +
> +#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
> +
> +/**
> + * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
> + * @dev: pointer to device associated with this genpd
> + *
> + * Returns device_id stored from ti,sci_id property
> + */
> +static int ti_sci_dev_id(struct device *dev)
> +{
> +       struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
> +       struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
> +
> +       return sci_dev_data->idx;
> +}
> +
> +/**
> + * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
> + * @dev: pointer to device associated with this genpd
> + *
> + * Returns ti_sci_handle to be used to communicate with system
> + *        control processor.
> + */
> +static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
> +{
> +       struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
> +       struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
> +
> +       return ti_sci_genpd->ti_sci;
> +}
> +
> +/**
> + * ti_sci_dev_start(): genpd device start hook called to turn device on
> + * @dev: pointer to device associated with this genpd to be powered on
> + */
> +static int ti_sci_dev_start(struct device *dev)
> +{
> +       const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
> +       int idx = ti_sci_dev_id(dev);
> +
> +       return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
> +}
> +
> +/**
> + * ti_sci_dev_stop(): genpd device stop hook called to turn device off
> + * @dev: pointer to device associated with this genpd to be powered off
> + */
> +static int ti_sci_dev_stop(struct device *dev)
> +{
> +       const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
> +       int idx = ti_sci_dev_id(dev);
> +
> +       return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
> +}
> +
> +static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
> +                               struct device *dev)
> +{
> +       struct device_node *np = dev->of_node;
> +       struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
> +       const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
> +       struct ti_sci_genpd_dev_data *sci_dev_data;
> +       struct generic_pm_domain_data *genpd_data;
> +       int idx, ret = 0;
> +
> +       ret = of_property_read_u32(np, "ti,sci-id", &idx);
> +       if (ret) {
> +               dev_err(ti_sci_genpd->dev, "Cannot find ti,sci-id for %s\n",
> +                       dev_name(dev));
> +               return -ENODEV;
> +       }
> +
> +       /*
> +        * Check the validity of the requested idx, if the index is not valid
> +        * the PMMC will return a NAK here and we will not allocate it.
> +        */
> +       ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
> +       if (ret)
> +               return -EINVAL;
> +
> +       sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
> +       if (!sci_dev_data)
> +               return -ENOMEM;
> +
> +       sci_dev_data->idx = idx;
> +
> +       genpd_data = dev_gpd_data(dev);
> +       genpd_data->data = sci_dev_data;
> +
> +       return 0;
> +}
> +
> +static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
> +                                struct device *dev)
> +{
> +       struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
> +       struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
> +
> +       kfree(sci_dev_data);
> +       genpd_data->data = NULL;
> +}
> +
> +static const struct of_device_id ti_sci_pm_domain_matches[] = {
> +       { .compatible = "ti,sci-pm-domain", },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
> +
> +static int ti_sci_pm_domain_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *np = dev->of_node;
> +       struct ti_sci_pm_domain *ti_sci_pd;
> +       int ret;
> +
> +       ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
> +       if (!ti_sci_pd)
> +               return -ENOMEM;
> +
> +       ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
> +       if (IS_ERR(ti_sci_pd->ti_sci))
> +               return PTR_ERR(ti_sci_pd->ti_sci);
> +
> +       ti_sci_pd->dev = dev;
> +
> +       ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
> +       ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
> +
> +       ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
> +       ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
> +
> +       pm_genpd_init(&ti_sci_pd->pd, NULL, true);
> +
> +       ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
> +
> +       return ret;
> +}
> +
> +static struct platform_driver ti_sci_pm_domains_driver = {
> +       .probe = ti_sci_pm_domain_probe,
> +       .driver = {
> +               .name = "ti_sci_pm_domains",
> +               .of_match_table = ti_sci_pm_domain_matches,
> +       },
> +};
> +module_platform_driver(ti_sci_pm_domains_driver);
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("TI System Control Interface (SCI) Power Domain driver");
> +MODULE_AUTHOR("Dave Gerlach");
> --
> 2.9.3
>

[toc] | [prev] | [next] | [standalone]

#1504327 — [PATCH v2 4/4] ARM: keystone: Drop PM domain support for k2g

K2G will use a different power domain driver than the rest of the
keystone family in order to make use of the TI SCI protocol so prevent
the standard keystone pm_domain code from registering itself in
preparation for a new driver.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-keystone/pm_domain.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
index 8cbb35765a19..fe57e2692629 100644
--- a/arch/arm/mach-keystone/pm_domain.c
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -32,7 +32,9 @@ static struct pm_clk_notifier_block platform_domain_notifier = {
 };
 
 static const struct of_device_id of_keystone_table[] = {
-	{.compatible = "ti,keystone"},
+	{.compatible = "ti,k2hk"},
+	{.compatible = "ti,k2e"},
+	{.compatible = "ti,k2l"},
 	{ /* end of list */ },
 };
 
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1505941

On Wed, Oct 19, 2016 at 10:33 PM, Dave Gerlach <d-gerlach@ti.com> wrote:
> Hi,
> This is v2 of the series to add support for TI SCI PM Domains. v1 of
> the series can be found here [1]. Several things have changed since v1:
>
> - New patch to add a void *data to struct generic_pm_domain_data to
>   allow to store per device data associated with a genpd
> - From v1, squash patch 1 and 2 to introduce docs and dt-bindings in
>   one patch based on comment from Ulf
> - Fix some grammar errors in Documentation
> - Based on comments from Ulf, rework actual genpd implementation to
>   avoid creating one genpd per device and instead use device start/stop
>   hooks provided as part of genpd to control device state based on pm_runtime
>   implementation. Also make use of new of_genpd_add_provider_simple API
>   introduced by Jon Hunter and do not provide custom of_xlate to genpd core,
>   instead registering devices as they probe through attach_dev hook provided
>   by genpd framework.
>
> Most of the changes were motivated by the comments from Ulf Hannson on v1 that we
> should not use a 1-to-1 genpd to device mapping. The new approach allows us to
> create a single genpd and store information about each device as they attach to
> the genpd. Then the device start/stop hooks for that genpd leverage the
> per-device data to control power states over the TI SCI protocol.
>
> This driver makes use of the ti_sci driver sent here [2] by Nishanth Menon and
> applies on top of his series on v4.9-rc1.
>
> Regards,
> Dave
>
> [1] http://www.spinics.net/lists/arm-kernel/msg525204.html
> [2] http://www.spinics.net/lists/arm-kernel/msg536851.html
>
> Dave Gerlach (4):
>   PM / Domains: Add generic data pointer to genpd data struct
>   dt-bindings: Add TI SCI PM Domains
>   soc: ti: Add ti_sci_pm_domains driver
>   ARM: keystone: Drop PM domain support for k2g

If I'm to apply this at one point, ACKs are required from Ulf/Kevin,
the appropriate platform maintainers, and the DT bindings people.
Also it should be applicable on top of the LInus' tree for me to apply
it.

Thanks,
Rafael

[toc] | [prev] | [next] | [standalone]

Page 1 of 2  [1] 2  Next page →

Back to top | Article view | linux.kernel

csiph-web