Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1502364 > unrolled thread

Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings Pantelis Antoniou <pantelis.antoniou@konsulko.com> - 2016-10-17 21:20 +0200

#1502364 — Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings

Hi Rob,

> On Oct 10, 2016, at 18:48 , Peter Rosin <peda@axentia.se> wrote:
> 
> On 2016-10-07 17:21, Pantelis Antoniou wrote:
>> From: Georgi Vlaev <gvlaev@juniper.net>
>> 
>> Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
>> 
>> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
>> ---
>> .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt   | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> new file mode 100644
>> index 0000000..03d917f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> @@ -0,0 +1,27 @@
>> +* Juniper I2C Mux on I2CS
>> +
>> +	I2C mux driver for switching the RE access to the FPC i2c bus.
>> +	Compatible with the FPC variant of the I2CS.
>> +
>> +Required properties:
>> +
>> +  - compatible: "jnx,i2cs-mux-i2cs".
> 
> jnx,i2c-mux-i2cs
> 

OK.

>> +
>> +The following required properties are defined externally:
>> +
>> +  - Standard I2C mux properties. See i2c-mux.txt in this directory.
> 
> To accommodate changes pending for 4.9, change "mux" to "gate" in
> this line…
> 

OK, interesting.


>> +  - I2C child bus nodes. See i2c-mux.txt in this directory.
> 
> This line is wrong since the child nodes themselves are optional in
> i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since
> the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt).
> 

OK then.

>> +
>> +Example:
>> +
>> +fpc0_mux {
>> +	compatible = "jnx,i2c-mux-i2cs";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
> 
> ...drop these two...
> 
>> +
>> +	fpc0i2c0: i2c@0 {
> 
> ...change i2c@0 to i2c-gate...
> 
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		reg = <0>;
> 
> ...and drop reg.
> 
> Cheers,
> Peter
> 

OK on all.

>> +	};
>> +};

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web