Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1498706 > unrolled thread

[PATCH v2 00/31] Don't use stack for DMA transers on media usb drivers

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 00/31]  Don't use stack for DMA transers on media usb drivers Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 04/31] cinergyT2-fe: cache stats at cinergyt2_fe_read_status() Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 05/31] cinergyT2-fe: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 29/31] s2255drv: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 26/31] dw2102: return error if su3000_power_ctrl() fails Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 30/31] stk-webcam: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 28/31] cpia2_usb: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
      Re: [PATCH v2 28/31] cpia2_usb: don't use stack for DMA  Kosuke Tatsukawa <tatsu@ab.jp.nec.com> - 2016-10-12 01:00 +0200
        [PATCH v2 .1 28/31] cpia2_usb: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-12 04:20 +0200
        Re: [PATCH v2 28/31] cpia2_usb: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-12 04:20 +0200
    [PATCH v2 01/31] af9005: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 15/31] dtt200u: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 24/31] dvb-usb: warn if return value for USB read/write routines is not checked Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 02/31] cinergyT2-core: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 07/31] dib0700: be sure that dib0700_ctrl_rd() users can do DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 11/31] digitv: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 17/31] dtv5100: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 25/31] nova-t-usb2: handle error code on RC query Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 18/31] gp8psk: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 20/31] nova-t-usb2: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 31/31] flexcop-usb: don't use stack for DMA Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 22/31] pctv452e: don't call BUG_ON() on non-fatal error Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 10/31] dibusb: handle error code on RC query Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 27/31] digitv: handle error code on RC query Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 16/31] dtt200u: handle USB control message errors Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 13/31] dtt200u-fe: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 21/31] pctv452e: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 19/31] gp8psk: don't go past the buffer size Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 12/31] dtt200u-fe: don't keep waiting for lock at set_frontend() Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 08/31] dib0700_core: don't use stack on I2C reads Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200
    [PATCH v2 06/31] cxusb: don't do DMA on stack Mauro Carvalho Chehab <mchehab@s-opensource.com> - 2016-10-11 12:20 +0200

Page 1 of 2  [1] 2  Next page →

#1498706 — [PATCH v2 00/31] Don't use stack for DMA transers on media usb drivers

Sending URB control messages from stack was never supported. Yet, on x86,
the stack was usually at a memory region that allows DMA transfer.

So, several drivers got it wrong. On Kernel 4.9, if VMAP_STACK=y, none of
those drivers will work, as the stack won't be on a DMA-able area anymore.

So, fix the media drivers that requre it. It should noticed that the vast
majority are at dvb-usb.

Please notice that those patches are compile-tested only.  So, I really 
appreciate if people with devices using those drivers could test and 
report if they don't break anything. I intend to send this 

PS.: I didn't verify any media driver inside staging.

Version 2:

- Added other USB drivers that are out of dvb-usb. After this series, all
  drivers will use kmalloc'ed buffers, although I won't doubt that some
  implementations may still have issues.

- Be sure that, on all places where it is using a buffer allocated at the
  dvb-usb state structs, they'll be protected by some mutex. On some
  such cases, there was already a mutex at the DVB core. So, I didn't
  need to add a new one. Thanks to Antti that reminded me about such
  need.


Mauro Carvalho Chehab (31):
  af9005: don't do DMA on stack
  cinergyT2-core: don't do DMA on stack
  cinergyT2-core: handle error code on RC query
  cinergyT2-fe: cache stats at cinergyt2_fe_read_status()
  cinergyT2-fe: don't do DMA on stack
  cxusb: don't do DMA on stack
  dib0700: be sure that dib0700_ctrl_rd() users can do DMA
  dib0700_core: don't use stack on I2C reads
  dibusb: don't do DMA on stack
  dibusb: handle error code on RC query
  digitv: don't do DMA on stack
  dtt200u-fe: don't keep waiting for lock at set_frontend()
  dtt200u-fe: don't do DMA on stack
  dtt200u-fe: handle errors on USB control messages
  dtt200u: don't do DMA on stack
  dtt200u: handle USB control message errors
  dtv5100: don't do DMA on stack
  gp8psk: don't do DMA on stack
  gp8psk: don't go past the buffer size
  nova-t-usb2: don't do DMA on stack
  pctv452e: don't do DMA on stack
  pctv452e: don't call BUG_ON() on non-fatal error
  technisat-usb2: use DMA buffers for I2C transfers
  dvb-usb: warn if return value for USB read/write routines is not
    checked
  nova-t-usb2: handle error code on RC query
  dw2102: return error if su3000_power_ctrl() fails
  digitv: handle error code on RC query
  cpia2_usb: don't use stack for DMA
  s2255drv: don't use stack for DMA
  stk-webcam: don't use stack for DMA
  flexcop-usb: don't use stack for DMA

 drivers/media/usb/b2c2/flexcop-usb.c        | 105 +++++----
 drivers/media/usb/b2c2/flexcop-usb.h        |   4 +
 drivers/media/usb/cpia2/cpia2_usb.c         |  32 ++-
 drivers/media/usb/dvb-usb/af9005.c          | 317 ++++++++++++++++------------
 drivers/media/usb/dvb-usb/cinergyT2-core.c  |  90 +++++---
 drivers/media/usb/dvb-usb/cinergyT2-fe.c    | 100 ++++-----
 drivers/media/usb/dvb-usb/cxusb.c           |  62 +++---
 drivers/media/usb/dvb-usb/cxusb.h           |   6 +
 drivers/media/usb/dvb-usb/dib0700_core.c    |  31 ++-
 drivers/media/usb/dvb-usb/dib0700_devices.c |  25 +--
 drivers/media/usb/dvb-usb/dibusb-common.c   | 113 +++++++---
 drivers/media/usb/dvb-usb/dibusb.h          |   3 +
 drivers/media/usb/dvb-usb/digitv.c          |  26 ++-
 drivers/media/usb/dvb-usb/digitv.h          |   3 +
 drivers/media/usb/dvb-usb/dtt200u-fe.c      | 128 +++++++----
 drivers/media/usb/dvb-usb/dtt200u.c         | 120 ++++++++---
 drivers/media/usb/dvb-usb/dtv5100.c         |  10 +-
 drivers/media/usb/dvb-usb/dvb-usb.h         |   6 +-
 drivers/media/usb/dvb-usb/dw2102.c          |   2 +-
 drivers/media/usb/dvb-usb/gp8psk.c          |  25 ++-
 drivers/media/usb/dvb-usb/nova-t-usb2.c     |  25 ++-
 drivers/media/usb/dvb-usb/pctv452e.c        | 136 +++++++-----
 drivers/media/usb/dvb-usb/technisat-usb2.c  |  16 +-
 drivers/media/usb/s2255/s2255drv.c          |  15 +-
 drivers/media/usb/stkwebcam/stk-webcam.c    |  16 +-
 25 files changed, 918 insertions(+), 498 deletions(-)

-- 
2.7.4

[toc] | [next] | [standalone]

#1498707 — [PATCH v2 04/31] cinergyT2-fe: cache stats at cinergyt2_fe_read_status()

Instead of sending USB commands for every stats call, collect
them once, when status is updated. As the frontend kthread
will call it on every few seconds, the stats will still be
collected.

Besides reducing the amount of USB/I2C transfers, this also
warrants that all stats will be collected at the same time,
and makes easier to convert it to DVBv5 stats in the future.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/cinergyT2-fe.c | 48 +++++---------------------------
 1 file changed, 7 insertions(+), 41 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index b3ec743a7a2e..fd8edcb56e61 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -139,6 +139,7 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op)
 struct cinergyt2_fe_state {
 	struct dvb_frontend fe;
 	struct dvb_usb_device *d;
+	struct dvbt_get_status_msg status;
 };
 
 static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
@@ -154,6 +155,8 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 	if (ret < 0)
 		return ret;
 
+	state->status = result;
+
 	*status = 0;
 
 	if (0xffff - le16_to_cpu(result.gain) > 30)
@@ -177,34 +180,16 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0)
-		return ret;
-
-	*ber = le32_to_cpu(status.viterbi_error_rate);
+	*ber = le32_to_cpu(state->status.viterbi_error_rate);
 	return 0;
 }
 
 static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n",
-			ret);
-		return ret;
-	}
-	*unc = le32_to_cpu(status.uncorrected_block_count);
+	*unc = le32_to_cpu(state->status.uncorrected_block_count);
 	return 0;
 }
 
@@ -212,35 +197,16 @@ static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe,
 						u16 *strength)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_signal_strength() Failed!"
-			" (Error=%d)\n", ret);
-		return ret;
-	}
-	*strength = (0xffff - le16_to_cpu(status.gain));
+	*strength = (0xffff - le16_to_cpu(state->status.gain));
 	return 0;
 }
 
 static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret);
-		return ret;
-	}
-	*snr = (status.snr << 8) | status.snr;
+	*snr = (state->status.snr << 8) | state->status.snr;
 	return 0;
 }
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498708 — [PATCH v2 05/31] cinergyT2-fe: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/cinergyT2-fe.c | 56 +++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 23 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index fd8edcb56e61..2d29b4174dba 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -139,6 +139,10 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op)
 struct cinergyt2_fe_state {
 	struct dvb_frontend fe;
 	struct dvb_usb_device *d;
+
+	unsigned char data[64];
+	struct mutex data_mutex;
+
 	struct dvbt_get_status_msg status;
 };
 
@@ -146,28 +150,31 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 				    enum fe_status *status)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg result;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
 	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
-			sizeof(result), 0);
+	mutex_lock(&state->data_mutex);
+	state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1,
+				 state->data, sizeof(state->status), 0);
+	if (!ret)
+		memcpy(&state->status, state->data, sizeof(state->status));
+	mutex_unlock(&state->data_mutex);
+
 	if (ret < 0)
 		return ret;
 
-	state->status = result;
-
 	*status = 0;
 
-	if (0xffff - le16_to_cpu(result.gain) > 30)
+	if (0xffff - le16_to_cpu(state->status.gain) > 30)
 		*status |= FE_HAS_SIGNAL;
-	if (result.lock_bits & (1 << 6))
+	if (state->status.lock_bits & (1 << 6))
 		*status |= FE_HAS_LOCK;
-	if (result.lock_bits & (1 << 5))
+	if (state->status.lock_bits & (1 << 5))
 		*status |= FE_HAS_SYNC;
-	if (result.lock_bits & (1 << 4))
+	if (state->status.lock_bits & (1 << 4))
 		*status |= FE_HAS_CARRIER;
-	if (result.lock_bits & (1 << 1))
+	if (state->status.lock_bits & (1 << 1))
 		*status |= FE_HAS_VITERBI;
 
 	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
@@ -232,34 +239,36 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_set_parameters_msg param;
-	char result[2];
+	struct dvbt_set_parameters_msg *param;
 	int err;
 
-	param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
-	param.tps = cpu_to_le16(compute_tps(fep));
-	param.freq = cpu_to_le32(fep->frequency / 1000);
-	param.flags = 0;
+	mutex_lock(&state->data_mutex);
+
+	param = (void *)state->data;
+	param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
+	param->tps = cpu_to_le16(compute_tps(fep));
+	param->freq = cpu_to_le32(fep->frequency / 1000);
+	param->flags = 0;
 
 	switch (fep->bandwidth_hz) {
 	default:
 	case 8000000:
-		param.bandwidth = 8;
+		param->bandwidth = 8;
 		break;
 	case 7000000:
-		param.bandwidth = 7;
+		param->bandwidth = 7;
 		break;
 	case 6000000:
-		param.bandwidth = 6;
+		param->bandwidth = 6;
 		break;
 	}
 
-	err = dvb_usb_generic_rw(state->d,
-			(char *)&param, sizeof(param),
-			result, sizeof(result), 0);
+	err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param),
+				 state->data, 2, 0);
 	if (err < 0)
 		err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);
 
+	mutex_unlock(&state->data_mutex);
 	return (err < 0) ? err : 0;
 }
 
@@ -281,6 +290,7 @@ struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d)
 	s->d = d;
 	memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops));
 	s->fe.demodulator_priv = s;
+	mutex_init(&s->data_mutex);
 	return &s->fe;
 }
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498709 — [PATCH v2 29/31] s2255drv: don't use stack for DMA

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/s2255/s2255drv.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c
index c3a0e87066eb..f7bb78c1873c 100644
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -1901,19 +1901,30 @@ static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request,
 			     s32 TransferBufferLength, int bOut)
 {
 	int r;
+	unsigned char *buf;
+
+	buf = kmalloc(TransferBufferLength, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	if (!bOut) {
 		r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
 				    Request,
 				    USB_TYPE_VENDOR | USB_RECIP_DEVICE |
 				    USB_DIR_IN,
-				    Value, Index, TransferBuffer,
+				    Value, Index, buf,
 				    TransferBufferLength, HZ * 5);
+
+		if (r >= 0)
+			memcpy(TransferBuffer, buf, TransferBufferLength);
 	} else {
+		memcpy(buf, TransferBuffer, TransferBufferLength);
 		r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 				    Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				    Value, Index, TransferBuffer,
+				    Value, Index, buf,
 				    TransferBufferLength, HZ * 5);
 	}
+	kfree(buf);
 	return r;
 }
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498710 — [PATCH v2 26/31] dw2102: return error if su3000_power_ctrl() fails

Instead of silently ignoring the error, return it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/dw2102.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 5fb0c650926e..2c720cb2fb00 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -852,7 +852,7 @@ static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
 	if (i && !state->initialized) {
 		state->initialized = 1;
 		/* reset board */
-		dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
+		return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
 	}
 
 	return 0;
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498711 — [PATCH v2 30/31] stk-webcam: don't use stack for DMA

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/stkwebcam/stk-webcam.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index db200c9d796d..22a9aae16291 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -147,20 +147,26 @@ int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value)
 int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value)
 {
 	struct usb_device *udev = dev->udev;
+	unsigned char *buf;
 	int ret;
 
+	buf = kmalloc(sizeof(u8), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			0x00,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0x00,
 			index,
-			(u8 *) value,
+			buf,
 			sizeof(u8),
 			500);
-	if (ret < 0)
-		return ret;
-	else
-		return 0;
+	if (ret >= 0)
+		memcpy(value, buf, sizeof(u8));
+
+	kfree(buf);
+	return ret;
 }
 
 static int stk_start_stream(struct stk_camera *dev)
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498712 — [PATCH v2 28/31] cpia2_usb: don't use stack for DMA

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/cpia2/cpia2_usb.c | 32 +++++++++++++++++++++++++++++---
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 13620cdf0599..417d683b237d 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -545,10 +545,19 @@ static void free_sbufs(struct camera_data *cam)
 static int write_packet(struct usb_device *udev,
 			u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, registers, size);
+
+	ret = usb_control_msg(udev,
 			       usb_sndctrlpipe(udev, 0),
 			       request,
 			       USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -557,6 +566,9 @@ static int write_packet(struct usb_device *udev,
 			       registers,	/* buffer */
 			       size,
 			       HZ);
+
+	kfree(buf);
+	return ret;
 }
 
 /****************************************************************************
@@ -567,18 +579,32 @@ static int write_packet(struct usb_device *udev,
 static int read_packet(struct usb_device *udev,
 		       u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev,
 			       usb_rcvctrlpipe(udev, 0),
 			       request,
 			       USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
 			       start,	/* value */
 			       0,	/* index */
-			       registers,	/* buffer */
+			       buf,	/* buffer */
 			       size,
 			       HZ);
+
+	if (ret >= 0)
+		memcpy (registers, buf, size);
+
+	kfree(buf);
+
+	return ret;
 }
 
 /******************************************************************************
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1499280 — Re: [PATCH v2 28/31] cpia2_usb: don't use stack for DMA

Hi,

> The USB control messages require DMA to work. We cannot pass
> a stack-allocated buffer, as it is not warranted that the
> stack would be into a DMA enabled area.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
>  drivers/media/usb/cpia2/cpia2_usb.c | 32 +++++++++++++++++++++++++++++---
>  1 file changed, 29 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
> index 13620cdf0599..417d683b237d 100644
> --- a/drivers/media/usb/cpia2/cpia2_usb.c
> +++ b/drivers/media/usb/cpia2/cpia2_usb.c
> @@ -545,10 +545,19 @@ static void free_sbufs(struct camera_data *cam)
>  static int write_packet(struct usb_device *udev,
>  			u8 request, u8 * registers, u16 start, size_t size)
>  {
> +	unsigned char *buf;
> +	int ret;
> +
>  	if (!registers || size <= 0)
>  		return -EINVAL;
>  
> -	return usb_control_msg(udev,
> +	buf = kmalloc(size, GFP_KERNEL);
> +	if (!buf)
> +		return -ENOMEM;
> +
> +	memcpy(buf, registers, size);
> +
> +	ret = usb_control_msg(udev,
>  			       usb_sndctrlpipe(udev, 0),
>  			       request,
>  			       USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> @@ -557,6 +566,9 @@ static int write_packet(struct usb_device *udev,
>  			       registers,	/* buffer */
                               =========

I think you also want to change the argument to usb_control_msg() from
"registers" to "buf" in write_packet().


>  			       size,
>  			       HZ);
> +
> +	kfree(buf);
> +	return ret;
>  }
..
---
Kosuke TATSUKAWA  | 1st Platform Software Division
                  | NEC Solution Innovators
                  | tatsu@ab.jp.nec.com

[toc] | [prev] | [next] | [standalone]

#1499319 — [PATCH v2 .1 28/31] cpia2_usb: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

-- 

v2.1: As pointed by Kosuke Tatsukawa, I forgot to replace "registers" var
to "buf" at one of the usb_control_msg() calls.

diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 13620cdf0599..e9100a235831 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -545,18 +545,30 @@ static void free_sbufs(struct camera_data *cam)
 static int write_packet(struct usb_device *udev,
 			u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, registers, size);
+
+	ret = usb_control_msg(udev,
 			       usb_sndctrlpipe(udev, 0),
 			       request,
 			       USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			       start,	/* value */
 			       0,	/* index */
-			       registers,	/* buffer */
+			       buf,	/* buffer */
 			       size,
 			       HZ);
+
+	kfree(buf);
+	return ret;
 }
 
 /****************************************************************************
@@ -567,18 +579,32 @@ static int write_packet(struct usb_device *udev,
 static int read_packet(struct usb_device *udev,
 		       u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev,
 			       usb_rcvctrlpipe(udev, 0),
 			       request,
 			       USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
 			       start,	/* value */
 			       0,	/* index */
-			       registers,	/* buffer */
+			       buf,	/* buffer */
 			       size,
 			       HZ);
+
+	if (ret >= 0)
+		memcpy(registers, buf, size);
+
+	kfree(buf);
+
+	return ret;
 }
 
 /******************************************************************************

[toc] | [prev] | [next] | [standalone]

#1499320 — Re: [PATCH v2 28/31] cpia2_usb: don't use stack for DMA

Em Tue, 11 Oct 2016 22:56:06 +0000
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> escreveu:

> Hi,
> 
> > The USB control messages require DMA to work. We cannot pass
> > a stack-allocated buffer, as it is not warranted that the
> > stack would be into a DMA enabled area.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> > Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> > ---
> >  drivers/media/usb/cpia2/cpia2_usb.c | 32 +++++++++++++++++++++++++++++---
> >  1 file changed, 29 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
> > index 13620cdf0599..417d683b237d 100644
> > --- a/drivers/media/usb/cpia2/cpia2_usb.c
> > +++ b/drivers/media/usb/cpia2/cpia2_usb.c
> > @@ -545,10 +545,19 @@ static void free_sbufs(struct camera_data *cam)
> >  static int write_packet(struct usb_device *udev,
> >  			u8 request, u8 * registers, u16 start, size_t size)
> >  {
> > +	unsigned char *buf;
> > +	int ret;
> > +
> >  	if (!registers || size <= 0)
> >  		return -EINVAL;
> >  
> > -	return usb_control_msg(udev,
> > +	buf = kmalloc(size, GFP_KERNEL);
> > +	if (!buf)
> > +		return -ENOMEM;
> > +
> > +	memcpy(buf, registers, size);
> > +
> > +	ret = usb_control_msg(udev,
> >  			       usb_sndctrlpipe(udev, 0),
> >  			       request,
> >  			       USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> > @@ -557,6 +566,9 @@ static int write_packet(struct usb_device *udev,
> >  			       registers,	/* buffer */  
>                                =========
> 
> I think you also want to change the argument to usb_control_msg() from
> "registers" to "buf" in write_packet().

True!

Thanks for pointing it! Just sent a version of the patch with this fixed.

Regards,
Mauro

[toc] | [prev] | [next] | [standalone]

#1498713 — [PATCH v2 01/31] af9005: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/af9005.c | 317 +++++++++++++++++++++----------------
 1 file changed, 180 insertions(+), 137 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index efa782ed6e2d..4883f2fb4c2d 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -52,17 +52,16 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
 struct af9005_device_state {
 	u8 sequence;
 	int led_state;
+	unsigned char data[256];
+	struct mutex data_mutex;
 };
 
 static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 			      int readwrite, int type, u8 * values, int len)
 {
 	struct af9005_device_state *st = d->priv;
-	u8 obuf[16] = { 0 };
-	u8 ibuf[17] = { 0 };
-	u8 command;
-	int i;
-	int ret;
+	u8 command, seq;
+	int i, ret;
 
 	if (len < 1) {
 		err("generic read/write, less than 1 byte. Makes no sense.");
@@ -73,16 +72,17 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 		return -EINVAL;
 	}
 
-	obuf[0] = 14;		/* rest of buffer length low */
-	obuf[1] = 0;		/* rest of buffer length high */
+	mutex_lock(&st->data_mutex);
+	st->data[0] = 14;		/* rest of buffer length low */
+	st->data[1] = 0;		/* rest of buffer length high */
 
-	obuf[2] = AF9005_REGISTER_RW;	/* register operation */
-	obuf[3] = 12;		/* rest of buffer length */
+	st->data[2] = AF9005_REGISTER_RW;	/* register operation */
+	st->data[3] = 12;		/* rest of buffer length */
 
-	obuf[4] = st->sequence++;	/* sequence number */
+	st->data[4] = seq = st->sequence++;	/* sequence number */
 
-	obuf[5] = (u8) (reg >> 8);	/* register address */
-	obuf[6] = (u8) (reg & 0xff);
+	st->data[5] = (u8) (reg >> 8);	/* register address */
+	st->data[6] = (u8) (reg & 0xff);
 
 	if (type == AF9005_OFDM_REG) {
 		command = AF9005_CMD_OFDM_REG;
@@ -96,51 +96,52 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 	command |= readwrite;
 	if (readwrite == AF9005_CMD_WRITE)
 		for (i = 0; i < len; i++)
-			obuf[8 + i] = values[i];
+			st->data[8 + i] = values[i];
 	else if (type == AF9005_TUNER_REG)
 		/* read command for tuner, the first byte contains the i2c address */
-		obuf[8] = values[0];
-	obuf[7] = command;
+		st->data[8] = values[0];
+	st->data[7] = command;
 
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
+	ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0);
 	if (ret)
-		return ret;
+		goto ret;
 
 	/* sanity check */
-	if (ibuf[2] != AF9005_REGISTER_RW_ACK) {
+	if (st->data[2] != AF9005_REGISTER_RW_ACK) {
 		err("generic read/write, wrong reply code.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	if (ibuf[3] != 0x0d) {
+	if (st->data[3] != 0x0d) {
 		err("generic read/write, wrong length in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	if (ibuf[4] != obuf[4]) {
+	if (st->data[4] != seq) {
 		err("generic read/write, wrong sequence in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
 	/*
-	   Windows driver doesn't check these fields, in fact sometimes
-	   the register in the reply is different that what has been sent
-
-	   if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) {
-	   err("generic read/write, wrong register in reply.");
-	   return -EIO;
-	   }
-	   if (ibuf[7] != command) {
-	   err("generic read/write wrong command in reply.");
-	   return -EIO;
-	   }
+	 * In thesis, both input and output buffers should have
+	 * identical values for st->data[5] to st->data[8].
+	 * However, windows driver doesn't check these fields, in fact
+	 * sometimes the register in the reply is different that what
+	 * has been sent
 	 */
-	if (ibuf[16] != 0x01) {
+	if (st->data[16] != 0x01) {
 		err("generic read/write wrong status code in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
+
 	if (readwrite == AF9005_CMD_READ)
 		for (i = 0; i < len; i++)
-			values[i] = ibuf[8 + i];
+			values[i] = st->data[8 + i];
 
-	return 0;
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 
 }
 
@@ -464,8 +465,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
 	struct af9005_device_state *st = d->priv;
 
 	int ret, i, packet_len;
-	u8 buf[64];
-	u8 ibuf[64];
+	u8 seq;
 
 	if (wlen < 0) {
 		err("send command, wlen less than 0 bytes. Makes no sense.");
@@ -480,94 +480,97 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
 		return -EINVAL;
 	}
 	packet_len = wlen + 5;
-	buf[0] = (u8) (packet_len & 0xff);
-	buf[1] = (u8) ((packet_len & 0xff00) >> 8);
 
-	buf[2] = 0x26;		/* packet type */
-	buf[3] = wlen + 3;
-	buf[4] = st->sequence++;
-	buf[5] = command;
-	buf[6] = wlen;
+	mutex_lock(&st->data_mutex);
+
+	st->data[0] = (u8) (packet_len & 0xff);
+	st->data[1] = (u8) ((packet_len & 0xff00) >> 8);
+
+	st->data[2] = 0x26;		/* packet type */
+	st->data[3] = wlen + 3;
+	st->data[4] = seq = st->sequence++;
+	st->data[5] = command;
+	st->data[6] = wlen;
 	for (i = 0; i < wlen; i++)
-		buf[7 + i] = wbuf[i];
-	ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x27) {
+		st->data[7 + i] = wbuf[i];
+	ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0);
+	if (st->data[2] != 0x27) {
 		err("send command, wrong reply code.");
-		return -EIO;
-	}
-	if (ibuf[4] != buf[4]) {
+		ret = -EIO;
+	} else if (st->data[4] != seq) {
 		err("send command, wrong sequence in reply.");
-		return -EIO;
-	}
-	if (ibuf[5] != 0x01) {
+		ret = -EIO;
+	} else if (st->data[5] != 0x01) {
 		err("send command, wrong status code in reply.");
-		return -EIO;
-	}
-	if (ibuf[6] != rlen) {
+		ret = -EIO;
+	} else if (st->data[6] != rlen) {
 		err("send command, invalid data length in reply.");
-		return -EIO;
+		ret = -EIO;
 	}
-	for (i = 0; i < rlen; i++)
-		rbuf[i] = ibuf[i + 7];
-	return 0;
+	if (!ret) {
+		for (i = 0; i < rlen; i++)
+			rbuf[i] = st->data[i + 7];
+	}
+
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
 		       int len)
 {
 	struct af9005_device_state *st = d->priv;
-	u8 obuf[16], ibuf[14];
+	u8 seq;
 	int ret, i;
 
-	memset(obuf, 0, sizeof(obuf));
-	memset(ibuf, 0, sizeof(ibuf));
+	mutex_lock(&st->data_mutex);
 
-	obuf[0] = 14;		/* length of rest of packet low */
-	obuf[1] = 0;		/* length of rest of packer high */
+	memset(st->data, 0, sizeof(st->data));
 
-	obuf[2] = 0x2a;		/* read/write eeprom */
+	st->data[0] = 14;		/* length of rest of packet low */
+	st->data[1] = 0;		/* length of rest of packer high */
 
-	obuf[3] = 12;		/* size */
+	st->data[2] = 0x2a;		/* read/write eeprom */
 
-	obuf[4] = st->sequence++;
+	st->data[3] = 12;		/* size */
 
-	obuf[5] = 0;		/* read */
+	st->data[4] = seq = st->sequence++;
 
-	obuf[6] = len;
-	obuf[7] = address;
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x2b) {
+	st->data[5] = 0;		/* read */
+
+	st->data[6] = len;
+	st->data[7] = address;
+	ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0);
+	if (st->data[2] != 0x2b) {
 		err("Read eeprom, invalid reply code");
-		return -EIO;
-	}
-	if (ibuf[3] != 10) {
+		ret = -EIO;
+	} else if (st->data[3] != 10) {
 		err("Read eeprom, invalid reply length");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
+		ret = -EIO;
+	} else if (st->data[4] != seq) {
 		err("Read eeprom, wrong sequence in reply ");
-		return -EIO;
-	}
-	if (ibuf[5] != 1) {
+		ret = -EIO;
+	} else if (st->data[5] != 1) {
 		err("Read eeprom, wrong status in reply ");
-		return -EIO;
+		ret = -EIO;
 	}
-	for (i = 0; i < len; i++) {
-		values[i] = ibuf[6 + i];
+
+	if (!ret) {
+		for (i = 0; i < len; i++)
+			values[i] = st->data[6 + i];
 	}
-	return 0;
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
-static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
+static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
+			      u8 *buf, int size)
 {
-	u8 buf[FW_BULKOUT_SIZE + 2];
 	u16 checksum;
 	int act_len, i, ret;
-	memset(buf, 0, sizeof(buf));
+
+	memset(buf, 0, size);
 	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
 	buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
 	switch (type) {
@@ -720,15 +723,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
 {
 	int i, packets, ret, act_len;
 
-	u8 buf[FW_BULKOUT_SIZE + 2];
+	u8 *buf;
 	u8 reply;
 
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+	buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != 0x01) {
 		err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
 	packets = fw->size / FW_BULKOUT_SIZE;
 	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
@@ -743,28 +752,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
 				   buf, FW_BULKOUT_SIZE + 2, &act_len, 1000);
 		if (ret) {
 			err("firmware download failed at packet %d with code %d", i, ret);
-			return ret;
+			goto err;
 		}
 	}
-	ret = af9005_boot_packet(udev, FW_CONFIRM, &reply);
+	ret = af9005_boot_packet(udev, FW_CONFIRM, &reply,
+				 buf, FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != (u8) (packets & 0xff)) {
 		err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
-	ret = af9005_boot_packet(udev, FW_BOOT, &reply);
+	ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+		goto err;
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != 0x02) {
 		err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
 
-	return 0;
+err:
+	kfree(buf);
+	return ret;
 
 }
 
@@ -823,53 +839,59 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
 {
 	struct af9005_device_state *st = d->priv;
 	int ret, len;
-
-	u8 obuf[5];
-	u8 ibuf[256];
+	u8 seq;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 	if (rc_decode == NULL) {
 		/* it shouldn't never come here */
 		return 0;
 	}
+
+	mutex_lock(&st->data_mutex);
+
 	/* deb_info("rc_query\n"); */
-	obuf[0] = 3;		/* rest of packet length low */
-	obuf[1] = 0;		/* rest of packet lentgh high */
-	obuf[2] = 0x40;		/* read remote */
-	obuf[3] = 1;		/* rest of packet length */
-	obuf[4] = st->sequence++;	/* sequence number */
-	ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
+	st->data[0] = 3;		/* rest of packet length low */
+	st->data[1] = 0;		/* rest of packet lentgh high */
+	st->data[2] = 0x40;		/* read remote */
+	st->data[3] = 1;		/* rest of packet length */
+	st->data[4] = seq = st->sequence++;	/* sequence number */
+	ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0);
 	if (ret) {
 		err("rc query failed");
-		return ret;
+		goto ret;
 	}
-	if (ibuf[2] != 0x41) {
+	if (st->data[2] != 0x41) {
 		err("rc query bad header.");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
+		ret = -EIO;
+		goto ret;
+	} else if (st->data[4] != seq) {
 		err("rc query bad sequence.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	len = ibuf[5];
+	len = st->data[5];
 	if (len > 246) {
 		err("rc query invalid length");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
 	if (len > 0) {
 		deb_rc("rc data (%d) ", len);
-		debug_dump((ibuf + 6), len, deb_rc);
-		ret = rc_decode(d, &ibuf[6], len, event, state);
+		debug_dump((st->data + 6), len, deb_rc);
+		ret = rc_decode(d, &st->data[6], len, event, state);
 		if (ret) {
 			err("rc_decode failed");
-			return ret;
+			goto ret;
 		} else {
 			deb_rc("rc_decode state %x event %x\n", *state, *event);
 			if (*state == REMOTE_KEY_REPEAT)
 				*event = d->last_event;
 		}
 	}
-	return 0;
+
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff)
@@ -953,10 +975,16 @@ static int af9005_identify_state(struct usb_device *udev,
 				 int *cold)
 {
 	int ret;
-	u8 reply;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+	u8 reply, *buf;
+
+	buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply,
+				 buf, FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	deb_info("result of FW_CONFIG in identify state %d\n", reply);
 	if (reply == 0x01)
 		*cold = 1;
@@ -965,7 +993,10 @@ static int af9005_identify_state(struct usb_device *udev,
 	else
 		return -EIO;
 	deb_info("Identify state cold = %d\n", *cold);
-	return 0;
+
+err:
+	kfree(buf);
+	return ret;
 }
 
 static struct dvb_usb_device_properties af9005_properties;
@@ -973,8 +1004,20 @@ static struct dvb_usb_device_properties af9005_properties;
 static int af9005_usb_probe(struct usb_interface *intf,
 			    const struct usb_device_id *id)
 {
-	return dvb_usb_device_init(intf, &af9005_properties,
-				   THIS_MODULE, NULL, adapter_nr);
+	struct dvb_usb_device *d;
+	struct af9005_device_state *st;
+	int ret;
+
+	ret = dvb_usb_device_init(intf, &af9005_properties,
+			          THIS_MODULE, &d, adapter_nr);
+
+	if (ret < 0)
+		return ret;
+
+	st = d->priv;
+	mutex_init(&st->data_mutex);
+
+	return 0;
 }
 
 enum af9005_usb_table_entry {
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498714 — [PATCH v2 15/31] dtt200u: don't do DMA on stack

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/dtt200u.c | 104 ++++++++++++++++++++++++++----------
 1 file changed, 75 insertions(+), 29 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index d2a01b50af0d..7706938b5167 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -20,74 +20,103 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct dtt200u_state {
+	unsigned char data[80];
+	struct mutex data_mutex;
+};
+
 static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 b = SET_INIT;
+	struct dtt200u_state *st = d->priv;
+
+	mutex_lock(&st->data_mutex);
+
+	st->data[0] = SET_INIT;
 
 	if (onoff)
-		dvb_usb_generic_write(d,&b,2);
+		dvb_usb_generic_write(d, st->data, 2);
 
+	mutex_unlock(&st->data_mutex);
 	return 0;
 }
 
 static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
-	u8 b_streaming[2] = { SET_STREAMING, onoff };
-	u8 b_rst_pid = RESET_PID_FILTER;
+	struct dtt200u_state *st = adap->dev->priv;
 
-	dvb_usb_generic_write(adap->dev, b_streaming, 2);
+	mutex_lock(&st->data_mutex);
+	st->data[0] = SET_STREAMING;
+	st->data[1] = onoff;
+
+	dvb_usb_generic_write(adap->dev, st->data, 2);
+
+	if (onoff)
+		return 0;
+
+	st->data[0] = RESET_PID_FILTER;
+	dvb_usb_generic_write(adap->dev, st->data, 1);
+
+	mutex_unlock(&st->data_mutex);
 
-	if (onoff == 0)
-		dvb_usb_generic_write(adap->dev, &b_rst_pid, 1);
 	return 0;
 }
 
 static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
 {
-	u8 b_pid[4];
+	struct dtt200u_state *st = adap->dev->priv;
+	int ret;
+
 	pid = onoff ? pid : 0;
 
-	b_pid[0] = SET_PID_FILTER;
-	b_pid[1] = index;
-	b_pid[2] = pid & 0xff;
-	b_pid[3] = (pid >> 8) & 0x1f;
+	mutex_lock(&st->data_mutex);
+	st->data[0] = SET_PID_FILTER;
+	st->data[1] = index;
+	st->data[2] = pid & 0xff;
+	st->data[3] = (pid >> 8) & 0x1f;
 
-	return dvb_usb_generic_write(adap->dev, b_pid, 4);
+	ret = dvb_usb_generic_write(adap->dev, st->data, 4);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int dtt200u_rc_query(struct dvb_usb_device *d)
 {
-	u8 key[5],cmd = GET_RC_CODE;
+	struct dtt200u_state *st = d->priv;
 	u32 scancode;
 
-	dvb_usb_generic_rw(d,&cmd,1,key,5,0);
-	if (key[0] == 1) {
+	mutex_lock(&st->data_mutex);
+	st->data[0] = GET_RC_CODE;
+
+	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	if (st->data[0] == 1) {
 		enum rc_type proto = RC_TYPE_NEC;
 
-		scancode = key[1];
-		if ((u8) ~key[1] != key[2]) {
+		scancode = st->data[1];
+		if ((u8) ~st->data[1] != st->data[2]) {
 			/* Extended NEC */
 			scancode = scancode << 8;
-			scancode |= key[2];
+			scancode |= st->data[2];
 			proto = RC_TYPE_NECX;
 		}
 		scancode = scancode << 8;
-		scancode |= key[3];
+		scancode |= st->data[3];
 
 		/* Check command checksum is ok */
-		if ((u8) ~key[3] == key[4])
+		if ((u8) ~st->data[3] == st->data[4])
 			rc_keydown(d->rc_dev, proto, scancode, 0);
 		else
 			rc_keyup(d->rc_dev);
-	} else if (key[0] == 2) {
+	} else if (st->data[0] == 2) {
 		rc_repeat(d->rc_dev);
 	} else {
 		rc_keyup(d->rc_dev);
 	}
 
-	if (key[0] != 0)
-		deb_info("key: %*ph\n", 5, key);
+	if (st->data[0] != 0)
+		deb_info("st->data: %*ph\n", 5, st->data);
 
+	mutex_unlock(&st->data_mutex);
 	return 0;
 }
 
@@ -106,17 +135,24 @@ static struct dvb_usb_device_properties wt220u_miglia_properties;
 static int dtt200u_usb_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
+	struct dvb_usb_device *d;
+	struct dtt200u_state *st;
+
 	if (0 == dvb_usb_device_init(intf, &dtt200u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_fc_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_miglia_properties,
-				     THIS_MODULE, NULL, adapter_nr))
+				     THIS_MODULE, &d, adapter_nr)) {
+		st = d->priv;
+		mutex_init(&st->data_mutex);
+
 		return 0;
+	}
 
 	return -ENODEV;
 }
@@ -140,6 +176,8 @@ static struct dvb_usb_device_properties dtt200u_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-dtt200u-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -190,6 +228,8 @@ static struct dvb_usb_device_properties wt220u_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-02.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -240,6 +280,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-fc03.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -290,6 +332,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-zl0353-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -340,6 +384,8 @@ static struct dvb_usb_device_properties wt220u_miglia_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-miglia-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498715 — [PATCH v2 24/31] dvb-usb: warn if return value for USB read/write routines is not checked

the return values for dvb_usb_generic_rw() and dvb_usb_generic_write()
should be checked, as otherwise the drivers won't be doing the right
thing in the case of errors.

So, add __must_check to both declarations.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/dvb-usb.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index 639c4678c65b..1448c3d27ea2 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -462,8 +462,10 @@ extern int dvb_usb_device_init(struct usb_interface *,
 extern void dvb_usb_device_exit(struct usb_interface *);
 
 /* the generic read/write method for device control */
-extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int);
-extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
+extern int __must_check
+dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16, int);
+extern int __must_check
+dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
 
 /* commonly used remote control parsing */
 extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498717 — [PATCH v2 02/31] cinergyT2-core: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/cinergyT2-core.c | 84 ++++++++++++++++++++++--------
 1 file changed, 61 insertions(+), 23 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 9fd1527494eb..d85c0c4d4042 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -41,6 +41,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct cinergyt2_state {
 	u8 rc_counter;
+	unsigned char data[64];
+	struct mutex data_mutex;
 };
 
 /* We are missing a release hook with usb_device data */
@@ -50,33 +52,52 @@ static struct dvb_usb_device_properties cinergyt2_properties;
 
 static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
 {
-	char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
-	char result[64];
-	return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
-				sizeof(result), 0);
+	struct dvb_usb_device *d = adap->dev;
+	struct cinergyt2_state *st = d->priv;
+	int ret;
+
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
+	st->data[1] = enable ? 1 : 0;
+
+	ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
 {
-	char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
-	char state[3];
-	return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
+	struct cinergyt2_state *st = d->priv;
+	int ret;
+
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
+	st->data[1] = enable ? 0 : 1;
+
+	ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
-	char state[3];
+	struct dvb_usb_device *d = adap->dev;
+	struct cinergyt2_state *st = d->priv;
 	int ret;
 
 	adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
 
-	ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
-				sizeof(state), 0);
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
+
+	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 	if (ret < 0) {
 		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
 			"state info\n");
 	}
+	mutex_unlock(&st->data_mutex);
 
 	/* Copy this pointer as we are gonna need it in the release phase */
 	cinergyt2_usb_device = adap->dev;
@@ -141,13 +162,16 @@ static int repeatable_keys[] = {
 static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct cinergyt2_state *st = d->priv;
-	u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
 	int i;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
-	if (key[4] == 0xff) {
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
+
+	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+
+	if (st->data[4] == 0xff) {
 		/* key repeat */
 		st->rc_counter++;
 		if (st->rc_counter > RC_REPEAT_DELAY) {
@@ -157,31 +181,45 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 					*event = d->last_event;
 					deb_rc("repeat key, event %x\n",
 						   *event);
-					return 0;
+					goto ret;
 				}
 			}
 			deb_rc("repeated key (non repeatable)\n");
 		}
-		return 0;
+		goto ret;
 	}
 
 	/* hack to pass checksum on the custom field */
-	key[2] = ~key[1];
-	dvb_usb_nec_rc_key_to_event(d, key, event, state);
-	if (key[0] != 0) {
+	st->data[2] = ~st->data[1];
+	dvb_usb_nec_rc_key_to_event(d, st->data, event, state);
+	if (st->data[0] != 0) {
 		if (*event != d->last_event)
 			st->rc_counter = 0;
 
-		deb_rc("key: %*ph\n", 5, key);
+		deb_rc("key: %*ph\n", 5, st->data);
 	}
-	return 0;
+
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 static int cinergyt2_usb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
-	return dvb_usb_device_init(intf, &cinergyt2_properties,
-					THIS_MODULE, NULL, adapter_nr);
+	struct dvb_usb_device *d;
+	struct cinergyt2_state *st;
+	int ret;
+
+	ret = dvb_usb_device_init(intf, &cinergyt2_properties,
+				  THIS_MODULE, &d, adapter_nr);
+	if (ret < 0)
+		return ret;
+
+	st = d->priv;
+	mutex_init(&st->data_mutex);
+
+	return 0;
 }
 
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498718 — [PATCH v2 07/31] dib0700: be sure that dib0700_ctrl_rd() users can do DMA

dib0700_ctrl_rd() takes a RX and a TX pointer. Be sure that
both will point to a memory allocated via kmalloc().

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/dib0700_core.c    |  4 +++-
 drivers/media/usb/dvb-usb/dib0700_devices.c | 25 +++++++++++++------------
 2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index f3196658fb70..515f89dba199 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -292,13 +292,15 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 
 			/* special thing in the current firmware: when length is zero the read-failed */
 			len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
-					msg[i+1].buf, msg[i+1].len);
+					      st->buf, msg[i + 1].len);
 			if (len <= 0) {
 				deb_info("I2C read failed on address 0x%02x\n",
 						msg[i].addr);
 				break;
 			}
 
+			memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len);
+
 			msg[i+1].len = len;
 
 			i++;
diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
index 0857b56e652c..ef1b8ee75c57 100644
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -508,8 +508,6 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 
 #define DEFAULT_RC_INTERVAL 50
 
-static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
-
 /*
  * This function is used only when firmware is < 1.20 version. Newer
  * firmwares use bulk mode, with functions implemented at dib0700_core,
@@ -517,7 +515,6 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
  */
 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 {
-	u8 key[4];
 	enum rc_type protocol;
 	u32 scancode;
 	u8 toggle;
@@ -532,39 +529,43 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 		return 0;
 	}
 
-	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
+	st->buf[0] = REQUEST_POLL_RC;
+	st->buf[1] = 0;
+
+	i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4);
 	if (i <= 0) {
 		err("RC Query Failed");
-		return -1;
+		return -EIO;
 	}
 
 	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
-	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
+	if (st->buf[0] == 0 && st->buf[1] == 0
+	    && st->buf[2] == 0 && st->buf[3] == 0)
 		return 0;
 
-	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
+	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]);  */
 
 	dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
 
 	switch (d->props.rc.core.protocol) {
 	case RC_BIT_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
-		    (key[3] == 0xff)) {
+		if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) &&
+		    (st->buf[3] == 0xff)) {
 			rc_repeat(d->rc_dev);
 			return 0;
 		}
 
 		protocol = RC_TYPE_NEC;
-		scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
+		scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]);
 		toggle = 0;
 		break;
 
 	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
 		protocol = RC_TYPE_RC5;
-		scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
-		toggle = key[3-1];
+		scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]);
+		toggle = st->buf[3 - 1];
 		break;
 	}
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498719 — [PATCH v2 11/31] digitv: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/digitv.c | 20 +++++++++++---------
 drivers/media/usb/dvb-usb/digitv.h |  3 +++
 2 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 63134335c994..09f8c28bd4db 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -28,20 +28,22 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static int digitv_ctrl_msg(struct dvb_usb_device *d,
 		u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
+	struct digitv_state *st = d->priv;
 	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 sndbuf[7],rcvbuf[7];
-	memset(sndbuf,0,7); memset(rcvbuf,0,7);
 
-	sndbuf[0] = cmd;
-	sndbuf[1] = vv;
-	sndbuf[2] = wo ? wlen : rlen;
+	memset(st->sndbuf, 0, 7);
+	memset(st->rcvbuf, 0, 7);
+
+	st->sndbuf[0] = cmd;
+	st->sndbuf[1] = vv;
+	st->sndbuf[2] = wo ? wlen : rlen;
 
 	if (wo) {
-		memcpy(&sndbuf[3],wbuf,wlen);
-		dvb_usb_generic_write(d,sndbuf,7);
+		memcpy(&st->sndbuf[3], wbuf, wlen);
+		dvb_usb_generic_write(d, st->sndbuf, 7);
 	} else {
-		dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10);
-		memcpy(rbuf,&rcvbuf[3],rlen);
+		dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10);
+		memcpy(rbuf, &st->rcvbuf[3], rlen);
 	}
 	return 0;
 }
diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h
index 908c09f4966b..cf104689bdff 100644
--- a/drivers/media/usb/dvb-usb/digitv.h
+++ b/drivers/media/usb/dvb-usb/digitv.h
@@ -6,6 +6,9 @@
 
 struct digitv_state {
     int is_nxt6000;
+
+    unsigned char sndbuf[7];
+    unsigned char rcvbuf[7];
 };
 
 /* protocol (from usblogging and the SDK:
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498720 — [PATCH v2 17/31] dtv5100: don't do DMA on stack

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/dtv5100.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c
index 3d11df41cac0..c60fb54f445f 100644
--- a/drivers/media/usb/dvb-usb/dtv5100.c
+++ b/drivers/media/usb/dvb-usb/dtv5100.c
@@ -31,9 +31,14 @@ module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct dtv5100_state {
+	unsigned char data[80];
+};
+
 static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
 			   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
 {
+	struct dtv5100_state *st = d->priv;
 	u8 request;
 	u8 type;
 	u16 value;
@@ -60,9 +65,10 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
 	}
 	index = (addr << 8) + wbuf[0];
 
+	memcpy(st->data, rbuf, rlen);
 	msleep(1); /* avoid I2C errors */
 	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request,
-			       type, value, index, rbuf, rlen,
+			       type, value, index, st->data, rlen,
 			       DTV5100_USB_TIMEOUT);
 }
 
@@ -176,7 +182,7 @@ static struct dvb_usb_device_properties dtv5100_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 
-	.size_of_priv = 0,
+	.size_of_priv = sizeof(struct dtv5100_state),
 
 	.num_adapters = 1,
 	.adapter = {{
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498721 — [PATCH v2 25/31] nova-t-usb2: handle error code on RC query

There's no sense on decoding and generating a RC key code if
there was an error on the URB control message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/nova-t-usb2.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index 26d7188a1163..1babd3341910 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -76,7 +76,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 *buf, data, toggle, custom;
 	u16 raw;
-	int i;
+	int i, ret;
 	struct dibusb_device_state *st = d->priv;
 
 	buf = kmalloc(5, GFP_KERNEL);
@@ -85,7 +85,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 	buf[0] = DIBUSB_REQ_POLL_REMOTE;
 	buf[1] = 0x35;
-	dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
+	ret = dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
+	if (ret < 0)
+		goto ret;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 	switch (buf[0]) {
@@ -124,8 +126,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 			break;
 	}
 
+ret:
 	kfree(buf);
-	return 0;
+	return ret;
 }
 
 static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498722 — [PATCH v2 18/31] gp8psk: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/gp8psk.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 5d0384dd45b5..fa215ad37f7b 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -24,6 +24,10 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct gp8psk_state {
+	unsigned char data[80];
+};
+
 static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
 {
 	return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
@@ -53,17 +57,19 @@ static void gp8psk_info(struct dvb_usb_device *d)
 
 int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
 {
+	struct gp8psk_state *st = d->priv;
 	int ret = 0,try = 0;
 
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
 	while (ret >= 0 && ret != blen && try < 3) {
+		memcpy(st->data, b, blen);
 		ret = usb_control_msg(d->udev,
 			usb_rcvctrlpipe(d->udev,0),
 			req,
 			USB_TYPE_VENDOR | USB_DIR_IN,
-			value,index,b,blen,
+			value, index, st->data, blen,
 			2000);
 		deb_info("reading number %d (ret: %d)\n",try,ret);
 		try++;
@@ -86,6 +92,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
 int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 			     u16 index, u8 *b, int blen)
 {
+	struct gp8psk_state *st = d->priv;
 	int ret;
 
 	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
@@ -94,11 +101,12 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
+	memcpy(st->data, b, blen);
 	if (usb_control_msg(d->udev,
 			usb_sndctrlpipe(d->udev,0),
 			req,
 			USB_TYPE_VENDOR | USB_DIR_OUT,
-			value,index,b,blen,
+			value,index, st->data, blen,
 			2000) != blen) {
 		warn("usb out operation failed.");
 		ret = -EIO;
@@ -265,6 +273,8 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-gp8psk-01.fw",
 
+	.size_of_priv = sizeof(struct gp8psk_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1498723 — [PATCH v2 20/31] nova-t-usb2: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-By: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/usb/dvb-usb/nova-t-usb2.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index fc7569e2728d..26d7188a1163 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -74,22 +74,29 @@ static struct rc_map_table rc_map_haupp_table[] = {
  */
 static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom;
+	u8 *buf, data, toggle, custom;
 	u16 raw;
 	int i;
 	struct dibusb_device_state *st = d->priv;
 
-	dvb_usb_generic_rw(d,cmd,2,key,5,0);
+	buf = kmalloc(5, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = DIBUSB_REQ_POLL_REMOTE;
+	buf[1] = 0x35;
+	dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
 
 	*state = REMOTE_NO_KEY_PRESSED;
-	switch (key[0]) {
+	switch (buf[0]) {
 		case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
-			raw = ((key[1] << 8) | key[2]) >> 3;
+			raw = ((buf[1] << 8) | buf[2]) >> 3;
 			toggle = !!(raw & 0x800);
 			data = raw & 0x3f;
 			custom = (raw >> 6) & 0x1f;
 
-			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
+			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",
+			       buf[1], buf[2], buf[3], custom, data, toggle);
 
 			for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
 				if (rc5_data(&rc_map_haupp_table[i]) == data &&
@@ -117,6 +124,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 			break;
 	}
 
+	kfree(buf);
 	return 0;
 }
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

Page 1 of 2  [1] 2  Next page →

Back to top | Article view | linux.kernel

csiph-web