Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1495412 > unrolled thread
| Started by | Mugunthan V N <mugunthanvnm@ti.com> |
|---|---|
| First post | 2016-10-04 15:00 +0200 |
| Last post | 2016-10-04 15:00 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v2 1/4] net: phy: dp83867: Add documentation for optional impedance control Mugunthan V N <mugunthanvnm@ti.com> - 2016-10-04 15:00 +0200
| From | Mugunthan V N <mugunthanvnm@ti.com> |
|---|---|
| Date | 2016-10-04 15:00 +0200 |
| Subject | [PATCH v2 1/4] net: phy: dp83867: Add documentation for optional impedance control |
| Message-ID | <soxua-2PF-9@gated-at.bofh.it> |
Add documention of ti,impedance-control which can be used to correct MAC impedance mismatch using phy extended registers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> --- Documentation/devicetree/bindings/net/ti,dp83867.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 5d21141..85bf945 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -9,6 +9,18 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Optional property: + - ti,min-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + minimum value (35 ohms). + - ti,max-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + maximum value (70 ohms). + +Note: ti,min-output-impedance and ti,max-output-impedance are mutually + exclusive. When both properties are present ti,max-output-impedance + takes precedence. + Default child nodes are standard Ethernet PHY device nodes as described in Documentation/devicetree/bindings/net/phy.txt -- 2.10.0.372.g6fe1b14
Back to top | Article view | linux.kernel
csiph-web