Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1493919 > unrolled thread

[PATCH 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-09-30 09:10 +0200

#1493919 — [PATCH 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state

If the pwm is not enabled the backlight initially should not be enabled
either if we have booted with DT and there is a phandle pointing to the
backlight node.

The patch extends the checks to decide if we should keep the backlight off
initially.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/video/backlight/pwm_bl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 9bc4715bf116..e4326bbf807f 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -223,6 +223,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 	if (!regulator_is_enabled(pb->power_supply))
 		return FB_BLANK_POWERDOWN;
 
+	/* The pwm is disabled, keep it like this */
+	if (!pwm_is_enabled(pb->pwm))
+		return FB_BLANK_POWERDOWN;
+
 	return FB_BLANK_UNBLANK;
 }
 
-- 
2.10.0

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web