Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1491141 > unrolled thread

Re: [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++   Bridge "Peter Senna Tschudin" <peter.senna@collabora.co.uk> - 2016-09-26 10:30 +0200
    Re: [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge Shawn Guo <shawnguo@kernel.org> - 2016-09-29 12:50 +0200

#1491141 — Re: [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge

Patch 1/4 is already on linux-next, but what about this one? Ping?

On Tuesday, August 9, 2016 18:41 CEST, Peter Senna Tschudin <peter.senna@collabora.com> wrote: 
 
> Configures the GE B850v3 LVDS/DP++ bridge on the dts file.
> 
> Cc: Martyn Welch <martyn.welch@collabora.co.uk>
> Cc: Martin Donnelly <martin.donnelly@ge.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
> ---
> Unchanged from V4
> 
> Changes from V3:
>  - 4/4 instead of 5/5
> 
> Unchanged from V2
> 
> Changes from V1:
>  - Replaced '_' by '-' in node names or compatible strings
>  - Added missing @73 to b850v3-lvds-dp-bridge
> 
>  arch/arm/boot/dts/imx6q-b850v3.dts | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> index 167f744..8db3bf2 100644
> --- a/arch/arm/boot/dts/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -72,6 +72,13 @@
>  		fsl,data-mapping = "spwg";
>  		fsl,data-width = <24>;
>  		status = "okay";
> +
> +		port@4 {
> +			reg = <4>;
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&b850v3_lvds_dp_bridge_in>;
> +			};
> +		};
>  	};
>  };
>  
> @@ -142,3 +149,26 @@
>  		reg = <0x4a>;
>  	};
>  };
> +
> +&mux2_i2c2 {
> +	status = "okay";
> +	clock-frequency = <100000>;
> +
> +	b850v3-lvds-dp-bridge@73 {
> +		compatible = "ge,b850v3-lvds-dp";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg = <0x73>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		edid-reg = <0x72>;
> +
> +		port {
> +			b850v3_lvds_dp_bridge_in: endpoint {
> +				remote-endpoint = <&lvds0_out>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.5.5
> 
 
 
 
 

[toc] | [next] | [standalone]

#1493338 — Re: [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge

On Mon, Sep 26, 2016 at 09:27:59AM +0100, Peter Senna Tschudin wrote:
> Patch 1/4 is already on linux-next, but what about this one? Ping?

Ping me after driver part (patch #3) lands on mainline.

Shawn

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web