Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1490603 > unrolled thread
| Started by | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| First post | 2016-09-24 11:20 +0200 |
| Last post | 2016-09-24 11:30 +0200 |
| Articles | 8 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH 0/5] arm64: dts: hisilicon: Hip06 fix and support Hip07 D05 board Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:20 +0200
[PATCH 3/5] arm64: dts: hisilicon: Add initial dts for Hip07 D05 board Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:20 +0200
[PATCH 1/5] arm64: dts: hip06: Correct hardware pin number of usb node Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:20 +0200
[PATCH 2/5] Documentation: arm64: Add Hisilicon Hip07 D05 dts binding Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:20 +0200
[PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:30 +0200
Re: [PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-09-27 13:00 +0200
Re: [PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-27 15:30 +0200
[PATCH 4/5] tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-09-24 11:30 +0200
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:20 +0200 |
| Subject | [PATCH 0/5] arm64: dts: hisilicon: Hip06 fix and support Hip07 D05 board |
| Message-ID | <skRhL-7Cx-1@gated-at.bofh.it> |
1) DTs - Fix Hip06 ehci/ohci interrupt pin number. - Add initial support for Hip07 D05 board. 2) PL011 - The sbsa uart is used on Hip07 SoC, the interrupt is connected to mbigen, but the uart probe(arch_init) is earlier than mbigen(module_init), so don't complain on -EPROBE_DEFER when no irq. - Add earlycon support for SBSA UART. Kefeng Wang (5): arm64: dts: hip06: Correct hardware pin number of usb node Documentation: arm64: Add Hisilicon Hip07 D05 dts binding arm64: dts: hisilicon: Add initial dts for Hip07 D05 board tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq tty: amba-pl011: Add earlycon support for SBSA UART .../bindings/arm/hisilicon/hisilicon.txt | 4 + arch/arm64/boot/dts/hisilicon/Makefile | 1 + arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 +- arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 66 ++ arch/arm64/boot/dts/hisilicon/hip07.dtsi | 1059 ++++++++++++++++++++ drivers/tty/serial/amba-pl011.c | 4 +- 6 files changed, 1135 insertions(+), 3 deletions(-) create mode 100644 arch/arm64/boot/dts/hisilicon/hip07-d05.dts create mode 100644 arch/arm64/boot/dts/hisilicon/hip07.dtsi -- 1.7.12.4
[toc] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:20 +0200 |
| Subject | [PATCH 3/5] arm64: dts: hisilicon: Add initial dts for Hip07 D05 board |
| Message-ID | <skRhM-7Cx-7@gated-at.bofh.it> |
| In reply to | #1490603 |
Adding initial dt file for Hip07 D05 board, it is with dual socket
and each socket has two SCCLs(supper cpu cluster), one SCCL contains
four clusters and each cluster has quard Cortex-A72.
Since each SCCL has their own DDR controller, it could be treated as
a separate numa node. Thus, there are four numa nodes(one node with
sixteen core) on Hip07 SoC.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
arch/arm64/boot/dts/hisilicon/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 66 ++
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 1059 +++++++++++++++++++++++++++
3 files changed, 1126 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/hip07-d05.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hip07.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index d5f43a0..c8b8f80 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
new file mode 100644
index 0000000..e058442
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -0,0 +1,66 @@
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip07.dtsi"
+
+/ {
+ model = "Hisilicon Hip07 D05 Development Board";
+ compatible = "hisilicon,hip07-d05";
+
+ /* the mem node will be updated by UEFI. */
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x40000000>;
+ numa-node-id = <0>;
+ };
+
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 15>,
+ <0 2 20>,
+ <0 3 25>,
+ <1 0 15>,
+ <1 1 10>,
+ <1 2 25>,
+ <1 3 30>,
+ <2 0 20>,
+ <2 1 25>,
+ <2 2 10>,
+ <2 3 15>,
+ <3 0 25>,
+ <3 1 30>,
+ <3 2 15>,
+ <3 3 10>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
+
+&usb_ohci {
+ status = "ok";
+};
+
+&usb_ehci {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
new file mode 100644
index 0000000..5144eb1
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -0,0 +1,1059 @@
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hip07-d05";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ core2 {
+ cpu = <&cpu10>;
+ };
+ core3 {
+ cpu = <&cpu11>;
+ };
+ };
+
+ cluster3 {
+ core0 {
+ cpu = <&cpu12>;
+ };
+ core1 {
+ cpu = <&cpu13>;
+ };
+ core2 {
+ cpu = <&cpu14>;
+ };
+ core3 {
+ cpu = <&cpu15>;
+ };
+ };
+
+ cluster4 {
+ core0 {
+ cpu = <&cpu16>;
+ };
+ core1 {
+ cpu = <&cpu17>;
+ };
+ core2 {
+ cpu = <&cpu18>;
+ };
+ core3 {
+ cpu = <&cpu19>;
+ };
+ };
+
+ cluster5 {
+ core0 {
+ cpu = <&cpu20>;
+ };
+ core1 {
+ cpu = <&cpu21>;
+ };
+ core2 {
+ cpu = <&cpu22>;
+ };
+ core3 {
+ cpu = <&cpu23>;
+ };
+ };
+
+ cluster6 {
+ core0 {
+ cpu = <&cpu24>;
+ };
+ core1 {
+ cpu = <&cpu25>;
+ };
+ core2 {
+ cpu = <&cpu26>;
+ };
+ core3 {
+ cpu = <&cpu27>;
+ };
+ };
+
+ cluster7 {
+ core0 {
+ cpu = <&cpu28>;
+ };
+ core1 {
+ cpu = <&cpu29>;
+ };
+ core2 {
+ cpu = <&cpu30>;
+ };
+ core3 {
+ cpu = <&cpu31>;
+ };
+ };
+
+ cluster8 {
+ core0 {
+ cpu = <&cpu32>;
+ };
+ core1 {
+ cpu = <&cpu33>;
+ };
+ core2 {
+ cpu = <&cpu34>;
+ };
+ core3 {
+ cpu = <&cpu35>;
+ };
+ };
+
+ cluster9 {
+ core0 {
+ cpu = <&cpu36>;
+ };
+ core1 {
+ cpu = <&cpu37>;
+ };
+ core2 {
+ cpu = <&cpu38>;
+ };
+ core3 {
+ cpu = <&cpu39>;
+ };
+ };
+
+ cluster10 {
+ core0 {
+ cpu = <&cpu40>;
+ };
+ core1 {
+ cpu = <&cpu41>;
+ };
+ core2 {
+ cpu = <&cpu42>;
+ };
+ core3 {
+ cpu = <&cpu43>;
+ };
+ };
+
+ cluster11 {
+ core0 {
+ cpu = <&cpu44>;
+ };
+ core1 {
+ cpu = <&cpu45>;
+ };
+ core2 {
+ cpu = <&cpu46>;
+ };
+ core3 {
+ cpu = <&cpu47>;
+ };
+ };
+
+ cluster12 {
+ core0 {
+ cpu = <&cpu48>;
+ };
+ core1 {
+ cpu = <&cpu49>;
+ };
+ core2 {
+ cpu = <&cpu50>;
+ };
+ core3 {
+ cpu = <&cpu51>;
+ };
+ };
+
+ cluster13 {
+ core0 {
+ cpu = <&cpu52>;
+ };
+ core1 {
+ cpu = <&cpu53>;
+ };
+ core2 {
+ cpu = <&cpu54>;
+ };
+ core3 {
+ cpu = <&cpu55>;
+ };
+ };
+
+ cluster14 {
+ core0 {
+ cpu = <&cpu56>;
+ };
+ core1 {
+ cpu = <&cpu57>;
+ };
+ core2 {
+ cpu = <&cpu58>;
+ };
+ core3 {
+ cpu = <&cpu59>;
+ };
+ };
+
+ cluster15 {
+ core0 {
+ cpu = <&cpu60>;
+ };
+ core1 {
+ cpu = <&cpu61>;
+ };
+ core2 {
+ cpu = <&cpu62>;
+ };
+ core3 {
+ cpu = <&cpu63>;
+ };
+ };
+ };
+
+ cpu0: cpu@10000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10000>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu1: cpu@10001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10001>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu2: cpu@10002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10002>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu3: cpu@10003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10003>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu4: cpu@10100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10100>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu5: cpu@10101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10101>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu6: cpu@10102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10102>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu7: cpu@10103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10103>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu8: cpu@10200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10200>;
+ enable-method = "psci";
+ next-level-cache = <&cluster2_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu9: cpu@10201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10201>;
+ enable-method = "psci";
+ next-level-cache = <&cluster2_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu10: cpu@10202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10202>;
+ enable-method = "psci";
+ next-level-cache = <&cluster2_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu11: cpu@10203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10203>;
+ enable-method = "psci";
+ next-level-cache = <&cluster2_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu12: cpu@10300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10300>;
+ enable-method = "psci";
+ next-level-cache = <&cluster3_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu13: cpu@10301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10301>;
+ enable-method = "psci";
+ next-level-cache = <&cluster3_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu14: cpu@10302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10302>;
+ enable-method = "psci";
+ next-level-cache = <&cluster3_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu15: cpu@10303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x10303>;
+ enable-method = "psci";
+ next-level-cache = <&cluster3_l2>;
+ numa-node-id = <0>;
+ };
+
+ cpu16: cpu@30000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30000>;
+ enable-method = "psci";
+ next-level-cache = <&cluster4_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu17: cpu@30001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30001>;
+ enable-method = "psci";
+ next-level-cache = <&cluster4_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu18: cpu@30002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30002>;
+ enable-method = "psci";
+ next-level-cache = <&cluster4_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu19: cpu@30003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30003>;
+ enable-method = "psci";
+ next-level-cache = <&cluster4_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu20: cpu@30100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30100>;
+ enable-method = "psci";
+ next-level-cache = <&cluster5_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu21: cpu@30101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30101>;
+ enable-method = "psci";
+ next-level-cache = <&cluster5_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu22: cpu@30102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30102>;
+ enable-method = "psci";
+ next-level-cache = <&cluster5_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu23: cpu@30103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30103>;
+ enable-method = "psci";
+ next-level-cache = <&cluster5_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu24: cpu@30200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30200>;
+ enable-method = "psci";
+ next-level-cache = <&cluster6_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu25: cpu@30201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30201>;
+ enable-method = "psci";
+ next-level-cache = <&cluster6_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu26: cpu@30202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30202>;
+ enable-method = "psci";
+ next-level-cache = <&cluster6_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu27: cpu@30203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30203>;
+ enable-method = "psci";
+ next-level-cache = <&cluster6_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu28: cpu@30300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30300>;
+ enable-method = "psci";
+ next-level-cache = <&cluster7_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu29: cpu@30301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30301>;
+ enable-method = "psci";
+ next-level-cache = <&cluster7_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu30: cpu@30302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30302>;
+ enable-method = "psci";
+ next-level-cache = <&cluster7_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu31: cpu@30303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x30303>;
+ enable-method = "psci";
+ next-level-cache = <&cluster7_l2>;
+ numa-node-id = <1>;
+ };
+
+ cpu32: cpu@50000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50000>;
+ enable-method = "psci";
+ next-level-cache = <&cluster8_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu33: cpu@50001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50001>;
+ enable-method = "psci";
+ next-level-cache = <&cluster8_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu34: cpu@50002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50002>;
+ enable-method = "psci";
+ next-level-cache = <&cluster8_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu35: cpu@50003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50003>;
+ enable-method = "psci";
+ next-level-cache = <&cluster8_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu36: cpu@50100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50100>;
+ enable-method = "psci";
+ next-level-cache = <&cluster9_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu37: cpu@50101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50101>;
+ enable-method = "psci";
+ next-level-cache = <&cluster9_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu38: cpu@50102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50102>;
+ enable-method = "psci";
+ next-level-cache = <&cluster9_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu39: cpu@50103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50103>;
+ enable-method = "psci";
+ next-level-cache = <&cluster9_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu40: cpu@50200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50200>;
+ enable-method = "psci";
+ next-level-cache = <&cluster10_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu41: cpu@50201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50201>;
+ enable-method = "psci";
+ next-level-cache = <&cluster10_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu42: cpu@50202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50202>;
+ enable-method = "psci";
+ next-level-cache = <&cluster10_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu43: cpu@50203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50203>;
+ enable-method = "psci";
+ next-level-cache = <&cluster10_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu44: cpu@50300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50300>;
+ enable-method = "psci";
+ next-level-cache = <&cluster11_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu45: cpu@50301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50301>;
+ enable-method = "psci";
+ next-level-cache = <&cluster11_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu46: cpu@50302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50302>;
+ enable-method = "psci";
+ next-level-cache = <&cluster11_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu47: cpu@50303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x50303>;
+ enable-method = "psci";
+ next-level-cache = <&cluster11_l2>;
+ numa-node-id = <2>;
+ };
+
+ cpu48: cpu@70000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70000>;
+ enable-method = "psci";
+ next-level-cache = <&cluster12_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu49: cpu@70001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70001>;
+ enable-method = "psci";
+ next-level-cache = <&cluster12_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu50: cpu@70002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70002>;
+ enable-method = "psci";
+ next-level-cache = <&cluster12_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu51: cpu@70003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70003>;
+ enable-method = "psci";
+ next-level-cache = <&cluster12_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu52: cpu@70100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70100>;
+ enable-method = "psci";
+ next-level-cache = <&cluster13_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu53: cpu@70101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70101>;
+ enable-method = "psci";
+ next-level-cache = <&cluster13_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu54: cpu@70102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70102>;
+ enable-method = "psci";
+ next-level-cache = <&cluster13_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu55: cpu@70103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70103>;
+ enable-method = "psci";
+ next-level-cache = <&cluster13_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu56: cpu@70200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70200>;
+ enable-method = "psci";
+ next-level-cache = <&cluster14_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu57: cpu@70201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70201>;
+ enable-method = "psci";
+ next-level-cache = <&cluster14_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu58: cpu@70202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70202>;
+ enable-method = "psci";
+ next-level-cache = <&cluster14_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu59: cpu@70203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70203>;
+ enable-method = "psci";
+ next-level-cache = <&cluster14_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu60: cpu@70300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70300>;
+ enable-method = "psci";
+ next-level-cache = <&cluster15_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu61: cpu@70301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70301>;
+ enable-method = "psci";
+ next-level-cache = <&cluster15_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu62: cpu@70302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70302>;
+ enable-method = "psci";
+ next-level-cache = <&cluster15_l2>;
+ numa-node-id = <3>;
+ };
+
+ cpu63: cpu@70303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x70303>;
+ enable-method = "psci";
+ next-level-cache = <&cluster15_l2>;
+ numa-node-id = <3>;
+ };
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
+ };
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+
+ cluster4_l2: l2-cache4 {
+ compatible = "cache";
+ };
+
+ cluster5_l2: l2-cache5 {
+ compatible = "cache";
+ };
+
+ cluster6_l2: l2-cache6 {
+ compatible = "cache";
+ };
+
+ cluster7_l2: l2-cache7 {
+ compatible = "cache";
+ };
+
+ cluster8_l2: l2-cache8 {
+ compatible = "cache";
+ };
+
+ cluster9_l2: l2-cache9 {
+ compatible = "cache";
+ };
+
+ cluster10_l2: l2-cache10 {
+ compatible = "cache";
+ };
+
+ cluster11_l2: l2-cache11 {
+ compatible = "cache";
+ };
+
+ cluster12_l2: l2-cache12 {
+ compatible = "cache";
+ };
+
+ cluster13_l2: l2-cache13 {
+ compatible = "cache";
+ };
+
+ cluster14_l2: l2-cache14 {
+ compatible = "cache";
+ };
+
+ cluster15_l2: l2-cache15 {
+ compatible = "cache";
+ };
+ };
+
+ gic: interrupt-controller@4d000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <4>;
+ redistributor-stride = <0x0 0x40000>;
+ reg = <0x0 0x4d000000 0x0 0x10000>, /* GICD */
+ <0x0 0x4d100000 0x0 0x400000>, /* p0 GICR node 0 */
+ <0x0 0x6d100000 0x0 0x400000>, /* p0 GICR node 1 */
+ <0x400 0x4d100000 0x0 0x400000>, /* p1 GICR node 2 */
+ <0x400 0x6d100000 0x0 0x400000>, /* p1 GICR node 3 */
+ <0x0 0xfe000000 0x0 0x10000>, /* GICC */
+ <0x0 0xfe010000 0x0 0x10000>, /* GICH */
+ <0x0 0xfe020000 0x0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ p0_its_peri_a: interrupt-controller@4c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x4c000000 0x0 0x40000>;
+ };
+
+ p0_its_peri_b: interrupt-controller@6c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0x6c000000 0x0 0x40000>;
+ };
+
+ p0_its_dsa_a: interrupt-controller@c6000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x0 0xc6000000 0x0 0x40000>;
+ };
+
+ p0_its_dsa_b: interrupt-controller@8,c6000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x8 0xc6000000 0x0 0x40000>;
+ };
+
+ p1_its_peri_a: interrupt-controller@400,4c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x400 0x4c000000 0x0 0x40000>;
+ };
+
+ p1_its_peri_b: interrupt-controller@400,6c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x400 0x6c000000 0x0 0x40000>;
+ };
+
+ p1_its_dsa_a: interrupt-controller@400,c6000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x400 0xc6000000 0x0 0x40000>;
+ };
+
+ p1_its_dsa_b: interrupt-controller@408,c6000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x408 0xc6000000 0x0 0x40000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ p0_mbigen_peri_b: interrupt-controller@60080000 {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0x60080000 0x0 0x10000>;
+
+ mbigen_uart: uart_intc {
+ msi-parent = <&p0_its_peri_b 0x120c7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <1>;
+ };
+ };
+
+ p0_mbigen_pcie_a: interrupt-controller@a0080000 {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0xa0080000 0x0 0x10000>;
+
+ mbigen_usb: intc_usb {
+ msi-parent = <&p0_its_dsa_a 0x40080>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <2>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart0: uart@602b0000 {
+ compatible = "arm,sbsa-uart";
+ reg = <0x0 0x602b0000 0x0 0x1000>;
+ interrupt-parent = <&mbigen_uart>;
+ interrupts = <807 4>;
+ current-speed = <115200>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ usb_ohci: ohci@a7030000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xa7030000 0x0 0x10000>;
+ interrupt-parent = <&mbigen_usb>;
+ interrupts = <640 4>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ usb_ehci: ehci@a7020000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xa7020000 0x0 0x10000>;
+ interrupt-parent = <&mbigen_usb>;
+ interrupts = <641 4>;
+ dma-coherent;
+ status = "disabled";
+ };
+ };
+};
--
1.7.12.4
[toc] | [prev] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:20 +0200 |
| Subject | [PATCH 1/5] arm64: dts: hip06: Correct hardware pin number of usb node |
| Message-ID | <skRhM-7Cx-15@gated-at.bofh.it> |
| In reply to | #1490603 |
The ohci/ehci hardware pin number should be 640/641, correct them.
Fixes: commit aa8d3e74f54d ("arm64: dts: Add initial dts for Hisilicon Hip06 D03 board")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 66b1bbf..be76f7d 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -322,7 +322,7 @@
compatible = "generic-ohci";
reg = <0x0 0xa7030000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
- interrupts = <64 4>;
+ interrupts = <640 4>;
dma-coherent;
status = "disabled";
};
@@ -331,7 +331,7 @@
compatible = "generic-ehci";
reg = <0x0 0xa7020000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
- interrupts = <65 4>;
+ interrupts = <641 4>;
dma-coherent;
status = "disabled";
};
--
1.7.12.4
[toc] | [prev] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:20 +0200 |
| Subject | [PATCH 2/5] Documentation: arm64: Add Hisilicon Hip07 D05 dts binding |
| Message-ID | <skRhM-7Cx-21@gated-at.bofh.it> |
| In reply to | #1490603 |
This patch adds documentation for the devicetree bindings used by the DT files of Hisilicon Hip07 D05 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> --- Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 3f81575..7df79a7 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -28,6 +28,10 @@ HiP06 D03 Board Required root node properties: - compatible = "hisilicon,hip06-d03"; +HiP07 D05 Board +Required root node properties: + - compatible = "hisilicon,hip07-d05"; + Hisilicon system controller Required properties: -- 1.7.12.4
[toc] | [prev] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:30 +0200 |
| Subject | [PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART |
| Message-ID | <skRrr-7FA-1@gated-at.bofh.it> |
| In reply to | #1490603 |
Declare an OF early console for SBSA UART so that the early console device can be specified via the "stdout-path" property in device-tree. Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> --- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7d9b291..3688d3b 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2330,6 +2330,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, return 0; } OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); +OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); #else #define AMBA_CONSOLE NULL -- 1.7.12.4
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-09-27 13:00 +0200 |
| Subject | Re: [PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART |
| Message-ID | <slYhb-8vQ-9@gated-at.bofh.it> |
| In reply to | #1490611 |
On Sat, Sep 24, 2016 at 05:14:25PM +0800, Kefeng Wang wrote: > Declare an OF early console for SBSA UART so that the early console device > can be specified via the "stdout-path" property in device-tree. > > Cc: Russell King <linux@armlinux.org.uk> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> > --- > drivers/tty/serial/amba-pl011.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c > index 7d9b291..3688d3b 100644 > --- a/drivers/tty/serial/amba-pl011.c > +++ b/drivers/tty/serial/amba-pl011.c > @@ -2330,6 +2330,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, > return 0; > } > OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); > +OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); Why do you need another option for the same thing? confused, greg k-h
[toc] | [prev] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-27 15:30 +0200 |
| Subject | Re: [PATCH 5/5] tty: amba-pl011: Add earlycon support for SBSA UART |
| Message-ID | <sm0Cl-1As-1@gated-at.bofh.it> |
| In reply to | #1491814 |
On 2016/9/27 18:57, Greg Kroah-Hartman wrote:
> On Sat, Sep 24, 2016 at 05:14:25PM +0800, Kefeng Wang wrote:
>> Declare an OF early console for SBSA UART so that the early console device
>> can be specified via the "stdout-path" property in device-tree.
>>
>> Cc: Russell King <linux@armlinux.org.uk>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>> ---
>> drivers/tty/serial/amba-pl011.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
>> index 7d9b291..3688d3b 100644
>> --- a/drivers/tty/serial/amba-pl011.c
>> +++ b/drivers/tty/serial/amba-pl011.c
>> @@ -2330,6 +2330,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
>> return 0;
>> }
>> OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
>> +OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
>
> Why do you need another option for the same thing?
It is used to support earlycon(without option) for sbsa-uart in bootargs.
chosen {
stdout-path = "serial0:115200n8";
bootargs = "earlycon"
};
uart0: uart@602b0000 {
compatible = "arm,sbsa-uart";
reg = <0x0 0x602b0000 0x0 0x1000>;
...
};
We setup a unique struct with compatible name by OF_EARLYCON_DECLARE,
#define OF_EARLYCON_DECLARE(_name, compat, fn) \
static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \
__used __section(__earlycon_table) \
= { .name = __stringify(_name), \
.compatible = compat, \
.setup = fn }
if without this patch(see drivers/of/fdt.c),
early_init_dt_scan_chosen_serial()
- for (match = __earlycon_table; match < __earlycon_table_end; match++)
-- if (fdt_node_check_compatible(fdt, offset, match->compatible))
countinue;
-- of_setup_earlycon(match, offset, options); // will never touch here.
Thanks,
Kefeng
>
> confused,
>
> greg k-h
>
> .
>
[toc] | [prev] | [next] | [standalone]
| From | Kefeng Wang <wangkefeng.wang@huawei.com> |
|---|---|
| Date | 2016-09-24 11:30 +0200 |
| Subject | [PATCH 4/5] tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq |
| Message-ID | <skRrr-7FA-5@gated-at.bofh.it> |
| In reply to | #1490603 |
Don't complain on -EPROBE_DEFER when attempting to get the irq.
the driver probe will be retried later.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
drivers/tty/serial/amba-pl011.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8a9e213..7d9b291 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2555,7 +2555,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
- dev_err(&pdev->dev, "cannot obtain irq\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "cannot obtain irq\n");
return ret;
}
uap->port.irq = ret;
--
1.7.12.4
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web