Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1487219 > unrolled thread

[PATCH 0/3] hisi_sas add hip07 support

Back to article view | Back to linux.kernel

Contents

  [PATCH 0/3] hisi_sas add hip07 support John Garry <john.garry@huawei.com> - 2016-09-20 12:40 +0200
    [PATCH 1/3] devicetree: bindings: scsi: hisi_sas hip07 support John Garry <john.garry@huawei.com> - 2016-09-20 12:40 +0200
    [PATCH 2/3] hisi_sas: add device tree support for hip07 John Garry <john.garry@huawei.com> - 2016-09-20 12:40 +0200
    [PATCH 3/3] hisi_sas: add v2 hw support for different refclk John Garry <john.garry@huawei.com> - 2016-09-20 12:40 +0200

#1487219 — [PATCH 0/3] hisi_sas add hip07 support

This patchset introduces support for hip07 SoC.

The hip07 SoC has the same v2 hw as in hip06.

Support for different reference clock is required
as some SAS registers need be programmed
differently, depending on the refclock rate.

Related patchset:
- https://patchwork.ozlabs.org/patch/665172/
  Once 4.9-rc1 is released, the D03 dts can be
  updated for the refclock.
  Note: there will be only 1 D03 dts, UEFI will update
  	the refclock rate for that board in the fdt at
  	boot time.

John Garry (3):
  devicetree: bindings: scsi: hisi_sas add hip07 support
  hisi_sas: add device tree support for hip07
  hisi_sas: add v2 hw support for different refclk

 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 3 ++-
 drivers/scsi/hisi_sas/hisi_sas.h                         | 2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c                    | 7 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c                   | 8 ++++++--
 4 files changed, 17 insertions(+), 3 deletions(-)

-- 
1.9.1

[toc] | [next] | [standalone]

#1487222 — [PATCH 1/3] devicetree: bindings: scsi: hisi_sas hip07 support

Add support for hip07 chipset to bindings.

Chipset hip07 has v2 hw.

The sas-v2 quirk amt is expanded to cover hip07.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index bf2411f..e604527 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -6,6 +6,7 @@ Main node required properties:
   - compatible : value should be as follows:
 	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
 	(b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset
+	(c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset
   - sas-addr : array of 8 bytes for host SAS address
   - reg : Address and length of the SAS register
   - hisilicon,sas-syscon: phandle of syscon used for sas control
@@ -47,7 +48,7 @@ Main node required properties:
 			increasing order.
 
 Optional main node properties:
- - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
+ - hip06/7-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
 			    "am-max-transmissions" limitation.
 
 Example:
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1487224 — [PATCH 2/3] hisi_sas: add device tree support for hip07

Chipset hip07 incorporates v2 hw.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 9825a3f..c1e3aa7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -777,7 +777,8 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 	/* Global registers init */
 
 	/* Deal with am-max-transmissions quirk */
-	if (device_property_present(dev, "hip06-sas-v2-quirk-amt")) {
+	if (device_property_present(dev, "hip06-sas-v2-quirk-amt") ||
+	    device_property_present(dev, "hip07-sas-v2-quirk-amt")) {
 		hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020);
 		hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS,
 				 0x2020);
@@ -2319,6 +2320,7 @@ static int hisi_sas_v2_remove(struct platform_device *pdev)
 
 static const struct of_device_id sas_v2_of_match[] = {
 	{ .compatible = "hisilicon,hip06-sas-v2",},
+	{ .compatible = "hisilicon,hip07-sas-v2",},
 	{},
 };
 MODULE_DEVICE_TABLE(of, sas_v2_of_match);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1487225 — [PATCH 3/3] hisi_sas: add v2 hw support for different refclk

Some hip06 D03 and hip07 D05 boards have different
reference clock frequencies for the SAS controller.

Register PHY_CTRL needs to be programmed differently
according to this frequency, so add support for this.

The default register setting in PHY_CTRL is for 50MHz,
so only update this register when the refclk frequency
is 66MHz.

The register cannot be set according to hip06 or hip07
as some variants of hip06 D03 board are 50MHz and some
are 66MHz (early editions). All hip07 D05 are 50MHz.

For ACPI we expect the _RST handler to set the correct
value for PHY_CTRL (we take an alternate approach for
DT and ACPI as ACPI does not support fixed-clock device
type).

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       | 2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 7 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +++-
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72c9852..64046c5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -13,6 +13,7 @@
 #define _HISI_SAS_H_
 
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/dmapool.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -183,6 +184,7 @@ struct hisi_hba {
 	u32 ctrl_reset_reg;
 	u32 ctrl_reset_sts_reg;
 	u32 ctrl_clock_ena_reg;
+	u32 refclk_frequency_mhz;
 	u8 sas_addr[SAS_ADDR_SIZE];
 
 	int n_phy;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2f872f7..0bc3165 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1396,6 +1396,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
+	struct clk *refclk;
 
 	shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
 	if (!shost)
@@ -1432,6 +1433,12 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 			goto err_out;
 	}
 
+	refclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(refclk))
+		dev_info(dev, "no ref clk property\n");
+	else
+		hisi_hba->refclk_frequency_mhz = clk_get_rate(refclk) / 1000000;
+
 	if (device_property_read_u32(dev, "phy-count", &hisi_hba->n_phy))
 		goto err_out;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index c1e3aa7..7014d99 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -837,7 +837,9 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0);
 		hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
-		hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
+		if (hisi_hba->refclk_frequency_mhz == 66)
+			hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
+		/* else, do nothing -> leave it how you found it */
 	}
 
 	for (i = 0; i < hisi_hba->queue_count; i++) {
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web