Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1487824 > unrolled thread
| Started by | Chunfeng Yun <chunfeng.yun@mediatek.com> |
|---|---|
| First post | 2016-09-21 08:00 +0200 |
| Last post | 2016-09-21 08:00 +0200 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.kernel
[RESEND PATCH v6, 0/5] Add MediaTek USB3 DRD Driver Chunfeng Yun <chunfeng.yun@mediatek.com> - 2016-09-21 08:00 +0200
[RESEND PATCH v6, 3/5] usb: xhci-mtk: make IPPC register optional Chunfeng Yun <chunfeng.yun@mediatek.com> - 2016-09-21 08:00 +0200
| From | Chunfeng Yun <chunfeng.yun@mediatek.com> |
|---|---|
| Date | 2016-09-21 08:00 +0200 |
| Subject | [RESEND PATCH v6, 0/5] Add MediaTek USB3 DRD Driver |
| Message-ID | <sjIJz-4YC-3@gated-at.bofh.it> |
From 99e428a1808c8ca91ff473d487b52ca5d355d875 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun@mediatek.com> Date: Mon, 5 Sep 2016 10:27:07 +0800 Subject: [PATCH v6, 0/5] Add MediaTek USB3 DRD Driver These patches introduce the MediaTek USB3 dual-role controller driver. The driver can be configured as Dual-Role Device (DRD), Peripheral Only and Host Only (xHCI) modes. It works well with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is tested on MT8173 platform which only contains USB2.0 device IP, and on MT6290 platform which contains USB3.0 device IP. Change in v6: 1. handle endianness of GPD and SETUP data 2. remove dummy error log and return suitable error number 3. cancel delay work when deregiseter driver Change in v5: 1. modify some comments 2. rename some unsuitable variables 3. add reg-names property for host node 4. add USB_MTU3_DEBUG to control debug messages Change in v4: 1. fix build errors on non-mediatek platforms 2. provide manual dual-role switch via debugfs instead of sysfs Change in v3: 1. fix some typo error 2. rename mtu3.txt to mt8173-mtu3.txt Change in v2: 1. modify binding docs according to suggestions 2. modify some comments and remove some dummy blank lines 3. fix memory leakage Chunfeng Yun (5): dt-bindings: mt8173-xhci: support host side of dual-role mode dt-bindings: mt8173-mtu3: add devicetree bindings usb: xhci-mtk: make IPPC register optional usb: Add MediaTek USB3 DRD Driver arm64: dts: mediatek: add USB3 DRD driver .../devicetree/bindings/usb/mt8173-mtu3.txt | 87 ++ .../devicetree/bindings/usb/mt8173-xhci.txt | 54 +- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 46 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 29 +- drivers/usb/Kconfig | 2 + drivers/usb/Makefile | 1 + drivers/usb/host/xhci-mtk.c | 36 +- drivers/usb/mtu3/Kconfig | 54 ++ drivers/usb/mtu3/Makefile | 19 + drivers/usb/mtu3/mtu3.h | 422 ++++++++++ drivers/usb/mtu3/mtu3_core.c | 871 +++++++++++++++++++ drivers/usb/mtu3/mtu3_dr.c | 379 +++++++++ drivers/usb/mtu3/mtu3_dr.h | 108 +++ drivers/usb/mtu3/mtu3_gadget.c | 731 ++++++++++++++++ drivers/usb/mtu3/mtu3_gadget_ep0.c | 883 ++++++++++++++++++++ drivers/usb/mtu3/mtu3_host.c | 294 +++++++ drivers/usb/mtu3/mtu3_hw_regs.h | 473 +++++++++++ drivers/usb/mtu3/mtu3_plat.c | 490 +++++++++++ drivers/usb/mtu3/mtu3_qmu.c | 599 +++++++++++++ drivers/usb/mtu3/mtu3_qmu.h | 43 + 20 files changed, 5603 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt create mode 100644 drivers/usb/mtu3/Kconfig create mode 100644 drivers/usb/mtu3/Makefile create mode 100644 drivers/usb/mtu3/mtu3.h create mode 100644 drivers/usb/mtu3/mtu3_core.c create mode 100644 drivers/usb/mtu3/mtu3_dr.c create mode 100644 drivers/usb/mtu3/mtu3_dr.h create mode 100644 drivers/usb/mtu3/mtu3_gadget.c create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c create mode 100644 drivers/usb/mtu3/mtu3_host.c create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h create mode 100644 drivers/usb/mtu3/mtu3_plat.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.h -- 1.7.9.5
[toc] | [next] | [standalone]
| From | Chunfeng Yun <chunfeng.yun@mediatek.com> |
|---|---|
| Date | 2016-09-21 08:00 +0200 |
| Subject | [RESEND PATCH v6, 3/5] usb: xhci-mtk: make IPPC register optional |
| Message-ID | <sjIJA-4YC-11@gated-at.bofh.it> |
| In reply to | #1487824 |
Make IPPC register optional to support host side of dual-role mode,
due to it is moved into common glue layer for simplification.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 36 +++++++++++++++++++++++++++++-------
1 file changed, 29 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 79959f1..4bf99b9 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -94,6 +94,9 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
int ret;
int i;
+ if (ippc == NULL)
+ return 0;
+
/* power on host ip */
value = readl(&ippc->ip_pw_ctr1);
value &= ~CTRL1_IP_HOST_PDN;
@@ -139,6 +142,9 @@ static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
int ret;
int i;
+ if (ippc == NULL)
+ return 0;
+
/* power down all u3 ports */
for (i = 0; i < mtk->num_u3_ports; i++) {
value = readl(&ippc->u3_ctrl_p[i]);
@@ -173,6 +179,9 @@ static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
u32 value;
+ if (ippc == NULL)
+ return 0;
+
/* reset whole ip */
value = readl(&ippc->ip_pw_ctr0);
value |= CTRL0_IP_SW_RST;
@@ -475,6 +484,7 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
/* called during probe() after chip reset completes */
static int xhci_mtk_setup(struct usb_hcd *hcd)
{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
int ret;
@@ -482,12 +492,21 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
ret = xhci_mtk_ssusb_config(mtk);
if (ret)
return ret;
+ }
+
+ ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
+ if (ret)
+ return ret;
+
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ mtk->num_u3_ports = xhci->num_usb3_ports;
+ mtk->num_u2_ports = xhci->num_usb2_ports;
ret = xhci_mtk_sch_init(mtk);
if (ret)
return ret;
}
- return xhci_gen_setup(hcd, xhci_mtk_quirks);
+ return ret;
}
static int xhci_mtk_probe(struct platform_device *pdev)
@@ -586,7 +605,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
mtk->hcd = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, mtk);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
hcd->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
@@ -595,11 +614,14 @@ static int xhci_mtk_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- mtk->ippc_regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(mtk->ippc_regs)) {
- ret = PTR_ERR(mtk->ippc_regs);
- goto put_usb2_hcd;
+ mtk->ippc_regs = NULL;
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
+ if (res) { /* ippc register is optional */
+ mtk->ippc_regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mtk->ippc_regs)) {
+ ret = PTR_ERR(mtk->ippc_regs);
+ goto put_usb2_hcd;
+ }
}
for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) {
--
1.7.9.5
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web