Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1487758 > unrolled thread
| Started by | Shawn Lin <shawn.lin@rock-chips.com> |
|---|---|
| First post | 2016-09-21 03:50 +0200 |
| Last post | 2016-09-22 11:40 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 2/5] mmc: core: switch to 1V8 or 1V2 for hs400es mode Shawn Lin <shawn.lin@rock-chips.com> - 2016-09-21 03:50 +0200
Re: [PATCH 2/5] mmc: core: switch to 1V8 or 1V2 for hs400es mode Ulf Hansson <ulf.hansson@linaro.org> - 2016-09-22 11:40 +0200
| From | Shawn Lin <shawn.lin@rock-chips.com> |
|---|---|
| Date | 2016-09-21 03:50 +0200 |
| Subject | [PATCH 2/5] mmc: core: switch to 1V8 or 1V2 for hs400es mode |
| Message-ID | <sjEPD-2rt-7@gated-at.bofh.it> |
When introducing hs400es, I didn't notice that we haven't
switched voltage to 1V2 or 1V8 for it. That happens to work
as the first controller claiming to support hs400es, arasan(5.1),
which is designed to only support 1V8. So the voltage is fixed to 1V8.
But it actually is wrong, and will not fit for other host controllers.
Let's fix it.
Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Cc: <stable@vger.kernel.org> 4.4# +
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
drivers/mmc/core/mmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3486bc7..3163bb9 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card)
goto out_err;
}
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+
+ if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+
+ /* If fails try again during next card power cycle */
+ if (err)
+ goto out_err;
+
err = mmc_select_bus_width(card);
if (err < 0)
goto out_err;
--
2.3.7
[toc] | [next] | [standalone]
| From | Ulf Hansson <ulf.hansson@linaro.org> |
|---|---|
| Date | 2016-09-22 11:40 +0200 |
| Message-ID | <sk8E1-4xk-7@gated-at.bofh.it> |
| In reply to | #1487758 |
On 21 September 2016 at 03:43, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> When introducing hs400es, I didn't notice that we haven't
> switched voltage to 1V2 or 1V8 for it. That happens to work
> as the first controller claiming to support hs400es, arasan(5.1),
> which is designed to only support 1V8. So the voltage is fixed to 1V8.
> But it actually is wrong, and will not fit for other host controllers.
> Let's fix it.
>
> Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
> Cc: <stable@vger.kernel.org> 4.4# +
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
>
> drivers/mmc/core/mmc.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 3486bc7..3163bb9 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card)
> goto out_err;
> }
>
> + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
/s/EXT_CSD_CARD_TYPE_HS200_1_2V/EXT_CSD_CARD_TYPE_HS400_1_2V
> + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
> +
> + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
/s/EXT_CSD_CARD_TYPE_HS200_1_8V/EXT_CSD_CARD_TYPE_HS400_1_8V
> + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
> +
> + /* If fails try again during next card power cycle */
> + if (err)
> + goto out_err;
> +
> err = mmc_select_bus_width(card);
> if (err < 0)
> goto out_err;
> --
> 2.3.7
>
>
Kind regards
Uffe
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web