Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1480281 > unrolled thread

[PATCH v3] arm64: Improve kprobes test for atomic sequence

Back to article view | Back to linux.kernel

Contents

  [PATCH v3] arm64: Improve kprobes test for atomic sequence David Long <dave.long@linaro.org> - 2016-09-09 21:40 +0200
    Re: [PATCH v3] arm64: Improve kprobes test for atomic sequence Masami Hiramatsu <mhiramat@kernel.org> - 2016-09-10 07:50 +0200
      Re: [PATCH v3] arm64: Improve kprobes test for atomic sequence David Long <dave.long@linaro.org> - 2016-09-12 04:00 +0200
        Re: [PATCH v3] arm64: Improve kprobes test for atomic sequence Masami Hiramatsu <mhiramat@kernel.org> - 2016-09-12 18:30 +0200
          Re: [PATCH v3] arm64: Improve kprobes test for atomic sequence David Long <dave.long@linaro.org> - 2016-09-12 20:20 +0200

#1480281 — [PATCH v3] arm64: Improve kprobes test for atomic sequence

From: "David A. Long" <dave.long@linaro.org>

Kprobes searches backwards a finite number of instructions to determine if
there is an attempt to probe a load/store exclusive sequence. It stops when
it hits the maximum number of instructions or a load or store exclusive.
However this means it can run up past the beginning of the function and
start looking at literal constants. This has been shown to cause a false
positive and blocks insertion of the probe. To fix this, further limit the
backwards search to stop if it hits a symbol address from kallsyms. The
presumption is that this is the entry point to this code (particularly for
the common case of placing probes at the beginning of functions).

This also improves efficiency by not searching code that is not part of the
function. There may be some possibility that the label might not denote the
entry path to the probed instruction but the likelihood seems low and this
is just another example of how the kprobes user really needs to be
careful about what they are doing.

Signed-off-by: David A. Long <dave.long@linaro.org>
---
 arch/arm64/kernel/probes/decode-insn.c | 48 ++++++++++++++++------------------
 1 file changed, 23 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 37e47a9..a691112 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/kallsyms.h>
 #include <asm/kprobes.h>
 #include <asm/insn.h>
 #include <asm/sections.h>
@@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 static bool __kprobes
 is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
 {
-	while (scan_start > scan_end) {
+	while (scan_start >= scan_end) {
 		/*
 		 * atomic region starts from exclusive load and ends with
 		 * exclusive store.
@@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
 {
 	enum kprobe_insn decoded;
 	kprobe_opcode_t insn = le32_to_cpu(*addr);
-	kprobe_opcode_t *scan_start = addr - 1;
-	kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
-	struct module *mod;
-#endif
-
-	if (addr >= (kprobe_opcode_t *)_text &&
-	    scan_end < (kprobe_opcode_t *)_text)
-		scan_end = (kprobe_opcode_t *)_text;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
-	else {
-		preempt_disable();
-		mod = __module_address((unsigned long)addr);
-		if (mod && within_module_init((unsigned long)addr, mod) &&
-			!within_module_init((unsigned long)scan_end, mod))
-			scan_end = (kprobe_opcode_t *)mod->init_layout.base;
-		else if (mod && within_module_core((unsigned long)addr, mod) &&
-			!within_module_core((unsigned long)scan_end, mod))
-			scan_end = (kprobe_opcode_t *)mod->core_layout.base;
-		preempt_enable();
+	kprobe_opcode_t *scan_end = 0;
+	unsigned long size = 0, offset = 0;
+
+	/*
+	 * If there's a symbol defined in front of and near enough to
+	 * the probe address assume it is the entry point to this
+	 * code and use it to further limit how far back we search
+	 * when determining if we're in an atomic sequence. If we could
+	 * not find any symbol skip the atomic test altogether as we
+	 * could otherwise end up searching irrelevant text/literals.
+	 * KPROBES depends on KALLSYMS so this last case should never
+	 * happen.
+	 */
+	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
+		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
+			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
+		else
+			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
 	}
-#endif
 	decoded = arm_probe_decode_insn(insn, asi);
 
-	if (decoded == INSN_REJECTED ||
-			is_probed_address_atomic(scan_start, scan_end))
-		return INSN_REJECTED;
+	if (decoded != INSN_REJECTED && scan_end)
+		if (is_probed_address_atomic(addr - 1, scan_end))
+			return INSN_REJECTED;
 
 	return decoded;
 }
-- 
2.5.0

[toc] | [next] | [standalone]

#1480506

On Fri,  9 Sep 2016 15:26:09 -0400
David Long <dave.long@linaro.org> wrote:

> From: "David A. Long" <dave.long@linaro.org>
> 
> Kprobes searches backwards a finite number of instructions to determine if
> there is an attempt to probe a load/store exclusive sequence. It stops when
> it hits the maximum number of instructions or a load or store exclusive.
> However this means it can run up past the beginning of the function and
> start looking at literal constants. This has been shown to cause a false
> positive and blocks insertion of the probe. To fix this, further limit the
> backwards search to stop if it hits a symbol address from kallsyms. The
> presumption is that this is the entry point to this code (particularly for
> the common case of placing probes at the beginning of functions).
> 
> This also improves efficiency by not searching code that is not part of the
> function. There may be some possibility that the label might not denote the
> entry path to the probed instruction but the likelihood seems low and this
> is just another example of how the kprobes user really needs to be
> careful about what they are doing.

Of course user should be careful, but also, in such case, kernel can reject
to probe it.


> 
> Signed-off-by: David A. Long <dave.long@linaro.org>
> ---
>  arch/arm64/kernel/probes/decode-insn.c | 48 ++++++++++++++++------------------
>  1 file changed, 23 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
> index 37e47a9..a691112 100644
> --- a/arch/arm64/kernel/probes/decode-insn.c
> +++ b/arch/arm64/kernel/probes/decode-insn.c
> @@ -16,6 +16,7 @@
>  #include <linux/kernel.h>
>  #include <linux/kprobes.h>
>  #include <linux/module.h>
> +#include <linux/kallsyms.h>
>  #include <asm/kprobes.h>
>  #include <asm/insn.h>
>  #include <asm/sections.h>
> @@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
>  static bool __kprobes
>  is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
>  {
> -	while (scan_start > scan_end) {
> +	while (scan_start >= scan_end) {
>  		/*
>  		 * atomic region starts from exclusive load and ends with
>  		 * exclusive store.
> @@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
>  {
>  	enum kprobe_insn decoded;
>  	kprobe_opcode_t insn = le32_to_cpu(*addr);
> -	kprobe_opcode_t *scan_start = addr - 1;
> -	kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
> -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
> -	struct module *mod;
> -#endif
> -
> -	if (addr >= (kprobe_opcode_t *)_text &&
> -	    scan_end < (kprobe_opcode_t *)_text)
> -		scan_end = (kprobe_opcode_t *)_text;
> -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
> -	else {
> -		preempt_disable();
> -		mod = __module_address((unsigned long)addr);
> -		if (mod && within_module_init((unsigned long)addr, mod) &&
> -			!within_module_init((unsigned long)scan_end, mod))
> -			scan_end = (kprobe_opcode_t *)mod->init_layout.base;
> -		else if (mod && within_module_core((unsigned long)addr, mod) &&
> -			!within_module_core((unsigned long)scan_end, mod))
> -			scan_end = (kprobe_opcode_t *)mod->core_layout.base;
> -		preempt_enable();
> +	kprobe_opcode_t *scan_end = 0;

Please use NULL for pointer.

> +	unsigned long size = 0, offset = 0;
> +
> +	/*
> +	 * If there's a symbol defined in front of and near enough to
> +	 * the probe address assume it is the entry point to this
> +	 * code and use it to further limit how far back we search
> +	 * when determining if we're in an atomic sequence. If we could
> +	 * not find any symbol skip the atomic test altogether as we
> +	 * could otherwise end up searching irrelevant text/literals.
> +	 * KPROBES depends on KALLSYMS so this last case should never
> +	 * happen.
> +	 */
> +	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
> +		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
> +			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
> +		else
> +			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;

        } else
               return INSN_REJECTED;

  that is what I expected...

Thank you,

>  	}
> -#endif
>  	decoded = arm_probe_decode_insn(insn, asi);
>  
> -	if (decoded == INSN_REJECTED ||
> -			is_probed_address_atomic(scan_start, scan_end))
> -		return INSN_REJECTED;
> +	if (decoded != INSN_REJECTED && scan_end)
> +		if (is_probed_address_atomic(addr - 1, scan_end))
> +			return INSN_REJECTED;
>  
>  	return decoded;
>  }
> -- 
> 2.5.0
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1480885

On 09/10/2016 01:48 AM, Masami Hiramatsu wrote:
> On Fri,  9 Sep 2016 15:26:09 -0400
> David Long <dave.long@linaro.org> wrote:
>
>> From: "David A. Long" <dave.long@linaro.org>
>>
>> Kprobes searches backwards a finite number of instructions to determine if
>> there is an attempt to probe a load/store exclusive sequence. It stops when
>> it hits the maximum number of instructions or a load or store exclusive.
>> However this means it can run up past the beginning of the function and
>> start looking at literal constants. This has been shown to cause a false
>> positive and blocks insertion of the probe. To fix this, further limit the
>> backwards search to stop if it hits a symbol address from kallsyms. The
>> presumption is that this is the entry point to this code (particularly for
>> the common case of placing probes at the beginning of functions).
>>
>> This also improves efficiency by not searching code that is not part of the
>> function. There may be some possibility that the label might not denote the
>> entry path to the probed instruction but the likelihood seems low and this
>> is just another example of how the kprobes user really needs to be
>> careful about what they are doing.
>
> Of course user should be careful, but also, in such case, kernel can reject
> to probe it.
>

I'm not exactly sure what you mean.  I'm just saying when everything 
goes right we still cannot promise perfection in detecting a probe 
within an atomic sequence.  This patch will reject a probe that is after 
a ldx and has no intervening kallsyms label (and assuming it's within 
the defined maximum count of subsequent instructions).

>
>>
>> Signed-off-by: David A. Long <dave.long@linaro.org>
>> ---
>>   arch/arm64/kernel/probes/decode-insn.c | 48 ++++++++++++++++------------------
>>   1 file changed, 23 insertions(+), 25 deletions(-)
>>
>> diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
>> index 37e47a9..a691112 100644
>> --- a/arch/arm64/kernel/probes/decode-insn.c
>> +++ b/arch/arm64/kernel/probes/decode-insn.c
>> @@ -16,6 +16,7 @@
>>   #include <linux/kernel.h>
>>   #include <linux/kprobes.h>
>>   #include <linux/module.h>
>> +#include <linux/kallsyms.h>
>>   #include <asm/kprobes.h>
>>   #include <asm/insn.h>
>>   #include <asm/sections.h>
>> @@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
>>   static bool __kprobes
>>   is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
>>   {
>> -	while (scan_start > scan_end) {
>> +	while (scan_start >= scan_end) {
>>   		/*
>>   		 * atomic region starts from exclusive load and ends with
>>   		 * exclusive store.
>> @@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
>>   {
>>   	enum kprobe_insn decoded;
>>   	kprobe_opcode_t insn = le32_to_cpu(*addr);
>> -	kprobe_opcode_t *scan_start = addr - 1;
>> -	kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
>> -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
>> -	struct module *mod;
>> -#endif
>> -
>> -	if (addr >= (kprobe_opcode_t *)_text &&
>> -	    scan_end < (kprobe_opcode_t *)_text)
>> -		scan_end = (kprobe_opcode_t *)_text;
>> -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
>> -	else {
>> -		preempt_disable();
>> -		mod = __module_address((unsigned long)addr);
>> -		if (mod && within_module_init((unsigned long)addr, mod) &&
>> -			!within_module_init((unsigned long)scan_end, mod))
>> -			scan_end = (kprobe_opcode_t *)mod->init_layout.base;
>> -		else if (mod && within_module_core((unsigned long)addr, mod) &&
>> -			!within_module_core((unsigned long)scan_end, mod))
>> -			scan_end = (kprobe_opcode_t *)mod->core_layout.base;
>> -		preempt_enable();
>> +	kprobe_opcode_t *scan_end = 0;
>
> Please use NULL for pointer.
>

A change has been made for v4.

>> +	unsigned long size = 0, offset = 0;
>> +
>> +	/*
>> +	 * If there's a symbol defined in front of and near enough to
>> +	 * the probe address assume it is the entry point to this
>> +	 * code and use it to further limit how far back we search
>> +	 * when determining if we're in an atomic sequence. If we could
>> +	 * not find any symbol skip the atomic test altogether as we
>> +	 * could otherwise end up searching irrelevant text/literals.
>> +	 * KPROBES depends on KALLSYMS so this last case should never
>> +	 * happen.
>> +	 */
>> +	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
>> +		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
>> +			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
>> +		else
>> +			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
>
>          } else
>                 return INSN_REJECTED;
>
>    that is what I expected...
>
> Thank you,
>
>>   	}
>> -#endif
>>   	decoded = arm_probe_decode_insn(insn, asi);
>>
>> -	if (decoded == INSN_REJECTED ||
>> -			is_probed_address_atomic(scan_start, scan_end))
>> -		return INSN_REJECTED;
>> +	if (decoded != INSN_REJECTED && scan_end)
>> +		if (is_probed_address_atomic(addr - 1, scan_end))
>> +			return INSN_REJECTED;
>>
>>   	return decoded;
>>   }
>> --
>> 2.5.0
>>
>
>

Thanks,
-dl

[toc] | [prev] | [next] | [standalone]

#1481532

On Sun, 11 Sep 2016 21:53:43 -0400
David Long <dave.long@linaro.org> wrote:

> On 09/10/2016 01:48 AM, Masami Hiramatsu wrote:
> > On Fri,  9 Sep 2016 15:26:09 -0400
> > David Long <dave.long@linaro.org> wrote:
> >
> >> From: "David A. Long" <dave.long@linaro.org>
> >>
> >> Kprobes searches backwards a finite number of instructions to determine if
> >> there is an attempt to probe a load/store exclusive sequence. It stops when
> >> it hits the maximum number of instructions or a load or store exclusive.
> >> However this means it can run up past the beginning of the function and
> >> start looking at literal constants. This has been shown to cause a false
> >> positive and blocks insertion of the probe. To fix this, further limit the
> >> backwards search to stop if it hits a symbol address from kallsyms. The
> >> presumption is that this is the entry point to this code (particularly for
> >> the common case of placing probes at the beginning of functions).
> >>
> >> This also improves efficiency by not searching code that is not part of the
> >> function. There may be some possibility that the label might not denote the
> >> entry path to the probed instruction but the likelihood seems low and this
> >> is just another example of how the kprobes user really needs to be
> >> careful about what they are doing.
> >
> > Of course user should be careful, but also, in such case, kernel can reject
> > to probe it.
> >
> 
> I'm not exactly sure what you mean.  I'm just saying when everything 
> goes right we still cannot promise perfection in detecting a probe 
> within an atomic sequence.  This patch will reject a probe that is after 
> a ldx and has no intervening kallsyms label (and assuming it's within 
> the defined maximum count of subsequent instructions).
> 

Hmm, what I meant was the below code.

> >> +	/*
> >> +	 * If there's a symbol defined in front of and near enough to
> >> +	 * the probe address assume it is the entry point to this
> >> +	 * code and use it to further limit how far back we search
> >> +	 * when determining if we're in an atomic sequence. If we could
> >> +	 * not find any symbol skip the atomic test altogether as we
> >> +	 * could otherwise end up searching irrelevant text/literals.
> >> +	 * KPROBES depends on KALLSYMS so this last case should never
> >> +	 * happen.
> >> +	 */
> >> +	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
> >> +		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
> >> +			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
> >> +		else
> >> +			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
> >
> >          } else
> >                 return INSN_REJECTED;
> >
> >    that is what I expected...

As you said above,

> >> +	 * KPROBES depends on KALLSYMS so this last case should never
> >> +	 * happen.

If it should never happen, it also would be better to reject it because
it is unexpected result.

Thank you,

-- 
Masami Hiramatsu <mhiramat@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1481792

On 09/12/2016 12:29 PM, Masami Hiramatsu wrote:
> On Sun, 11 Sep 2016 21:53:43 -0400
> David Long <dave.long@linaro.org> wrote:
>
>> On 09/10/2016 01:48 AM, Masami Hiramatsu wrote:
>>> On Fri,  9 Sep 2016 15:26:09 -0400
>>> David Long <dave.long@linaro.org> wrote:
>>>
>>>> From: "David A. Long" <dave.long@linaro.org>
>>>>
>>>> Kprobes searches backwards a finite number of instructions to determine if
>>>> there is an attempt to probe a load/store exclusive sequence. It stops when
>>>> it hits the maximum number of instructions or a load or store exclusive.
>>>> However this means it can run up past the beginning of the function and
>>>> start looking at literal constants. This has been shown to cause a false
>>>> positive and blocks insertion of the probe. To fix this, further limit the
>>>> backwards search to stop if it hits a symbol address from kallsyms. The
>>>> presumption is that this is the entry point to this code (particularly for
>>>> the common case of placing probes at the beginning of functions).
>>>>
>>>> This also improves efficiency by not searching code that is not part of the
>>>> function. There may be some possibility that the label might not denote the
>>>> entry path to the probed instruction but the likelihood seems low and this
>>>> is just another example of how the kprobes user really needs to be
>>>> careful about what they are doing.
>>>
>>> Of course user should be careful, but also, in such case, kernel can reject
>>> to probe it.
>>>
>>
>> I'm not exactly sure what you mean.  I'm just saying when everything
>> goes right we still cannot promise perfection in detecting a probe
>> within an atomic sequence.  This patch will reject a probe that is after
>> a ldx and has no intervening kallsyms label (and assuming it's within
>> the defined maximum count of subsequent instructions).
>>
>
> Hmm, what I meant was the below code.
>
>>>> +	/*
>>>> +	 * If there's a symbol defined in front of and near enough to
>>>> +	 * the probe address assume it is the entry point to this
>>>> +	 * code and use it to further limit how far back we search
>>>> +	 * when determining if we're in an atomic sequence. If we could
>>>> +	 * not find any symbol skip the atomic test altogether as we
>>>> +	 * could otherwise end up searching irrelevant text/literals.
>>>> +	 * KPROBES depends on KALLSYMS so this last case should never
>>>> +	 * happen.
>>>> +	 */
>>>> +	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
>>>> +		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
>>>> +			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
>>>> +		else
>>>> +			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
>>>
>>>           } else
>>>                  return INSN_REJECTED;
>>>
>>>     that is what I expected...
>
> As you said above,
>
>>>> +	 * KPROBES depends on KALLSYMS so this last case should never
>>>> +	 * happen.
>
> If it should never happen, it also would be better to reject it because
> it is unexpected result.
>
> Thank you,
>

OK, cool.  Sounds like we're on the same page.

-dl

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web