Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1477604 > unrolled thread

[PATCH v4 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings

Started byAlexandre TORGUE <alexandre.torgue@st.com>
First post2016-09-06 18:50 +0200
Last post2016-09-06 18:50 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v4 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings Alexandre TORGUE <alexandre.torgue@st.com> - 2016-09-06 18:50 +0200

#1477604 — [PATCH v4 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings

FromAlexandre TORGUE <alexandre.torgue@st.com>
Date2016-09-06 18:50 +0200
Subject[PATCH v4 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings
Message-ID<serJn-4tA-9@gated-at.bofh.it>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
new file mode 100644
index 0000000..6e7703d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -0,0 +1,20 @@
+STM32 External Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "st,stm32-exti"
+- reg: Specifies base physical address and size of the registers
+- interrupt-controller: Indentifies the node as an interrupt controller
+- #interrupt-cells: Specifies the number of cells to encode an interrupt
+  specifier, shall be 2
+- interrupts: interrupts references to primary interrupt controller
+
+Example:
+
+exti: interrupt-controller@40013c00 {
+	compatible = "st,stm32-exti";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x40013C00 0x400>;
+	interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+};
-- 
1.9.1

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web