Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1477002 > unrolled thread

Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node.

Started byZhang Rui <rui.zhang@intel.com>
First post2016-09-06 02:30 +0200
Last post2016-09-07 11:50 +0200
Articles 4 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node. Zhang Rui <rui.zhang@intel.com> - 2016-09-06 02:30 +0200
    Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node. Zhang Rui <rui.zhang@intel.com> - 2016-09-06 02:40 +0200
      Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node. Dawei Chien <dawei.chien@mediatek.com> - 2016-09-06 05:30 +0200
        Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node. Dawei Chien <dawei.chien@mediatek.com> - 2016-09-07 11:50 +0200

#1477002 — Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node.

FromZhang Rui <rui.zhang@intel.com>
Date2016-09-06 02:30 +0200
SubjectRe: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node.
Message-ID<secr0-2Nf-5@gated-at.bofh.it>
On 四, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:
> This adds the thermal controller and auxadc nodes
> to the Mediatek MT2701 dtsi file.
> 
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> ---
> This patch depned on:
> https://patchwork.kernel.org/patch/9249589/
> https://patchwork.kernel.org/patch/9249589/

Hmm, does this mean that I should take all these three patches and hold
the patches in next merge window until the above patch has been merged?

thanks,
rui 
> ---
>  arch/arm/boot/dts/mt2701.dtsi |   44
> +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt2701.dtsi
> b/arch/arm/boot/dts/mt2701.dtsi
> index e9150a4..cee4724 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -87,6 +87,36 @@
>  		clock-output-names = "rtc32k";
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal: cpu_thermal {
> +			polling-delay-passive = <1000>; /*
> milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +
> +			thermal-sensors = <&thermal 0>;
> +			sustainable-power = <1000>;
> +
> +			trips {
> +				threshold: trip-point@0 {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				target: trip-point@1 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu_crit@0 {
> +					temperature = <115000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv7-timer";
>  		interrupt-parent = <&gic>;
> @@ -222,4 +252,18 @@
>  		clock-names = "baud", "bus";
>  		status = "disabled";
>  	};
> +
> +	thermal: thermal@1100b000 {
> +		#thermal-sensor-cells = <0>;
> +		compatible = "mediatek,mt2701-thermal";
> +		reg = <0 0x1100b000 0 0x1000>;
> +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg
> CLK_PERI_AUXADC>;
> +		clock-names = "therm", "auxadc";
> +		resets = <&pericfg 0x10>;
> +		reset-names = "therm";
> +		mediatek,auxadc = <&auxadc>;
> +		mediatek,apmixedsys = <&apmixedsys>;
> +	};
> +
>  };

[toc] | [next] | [standalone]

#1477004

FromZhang Rui <rui.zhang@intel.com>
Date2016-09-06 02:40 +0200
Message-ID<secAF-2Sb-5@gated-at.bofh.it>
In reply to#1477002
On 二, 2016-09-06 at 08:24 +0800, Zhang Rui wrote:
> On 四, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:
> > 
> > This adds the thermal controller and auxadc nodes
> > to the Mediatek MT2701 dtsi file.
> > 
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> > This patch depned on:
> > https://patchwork.kernel.org/patch/9249589/
> > https://patchwork.kernel.org/patch/9249589/
> Hmm, does this mean that I should take all these three patches and
> hold
> the patches in next merge window until the above patch has been
> merged?
> 
Patch 3/3 can not be applied on top of upstream kernel, so I guess it
still has some other dependencies.
I think I can apply patch 1, 2 first. And patch 3/3 should be handled
in the dt tree.

thanks,
rui
> thanks,
> rui 
> > 
> > ---
> >  arch/arm/boot/dts/mt2701.dtsi |   44
> > +++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/mt2701.dtsi
> > b/arch/arm/boot/dts/mt2701.dtsi
> > index e9150a4..cee4724 100644
> > --- a/arch/arm/boot/dts/mt2701.dtsi
> > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > @@ -87,6 +87,36 @@
> >  		clock-output-names = "rtc32k";
> >  	};
> >  
> > +	thermal-zones {
> > +		cpu_thermal: cpu_thermal {
> > +			polling-delay-passive = <1000>; /*
> > milliseconds */
> > +			polling-delay = <1000>; /* milliseconds */
> > +
> > +			thermal-sensors = <&thermal 0>;
> > +			sustainable-power = <1000>;
> > +
> > +			trips {
> > +				threshold: trip-point@0 {
> > +					temperature = <68000>;
> > +					hysteresis = <2000>;
> > +					type = "passive";
> > +				};
> > +
> > +				target: trip-point@1 {
> > +					temperature = <85000>;
> > +					hysteresis = <2000>;
> > +					type = "passive";
> > +				};
> > +
> > +				cpu_crit: cpu_crit@0 {
> > +					temperature = <115000>;
> > +					hysteresis = <2000>;
> > +					type = "critical";
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> >  	timer {
> >  		compatible = "arm,armv7-timer";
> >  		interrupt-parent = <&gic>;
> > @@ -222,4 +252,18 @@
> >  		clock-names = "baud", "bus";
> >  		status = "disabled";
> >  	};
> > +
> > +	thermal: thermal@1100b000 {
> > +		#thermal-sensor-cells = <0>;
> > +		compatible = "mediatek,mt2701-thermal";
> > +		reg = <0 0x1100b000 0 0x1000>;
> > +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg
> > CLK_PERI_AUXADC>;
> > +		clock-names = "therm", "auxadc";
> > +		resets = <&pericfg 0x10>;
> > +		reset-names = "therm";
> > +		mediatek,auxadc = <&auxadc>;
> > +		mediatek,apmixedsys = <&apmixedsys>;
> > +	};
> > +
> >  };
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[toc] | [prev] | [next] | [standalone]

#1477046

FromDawei Chien <dawei.chien@mediatek.com>
Date2016-09-06 05:30 +0200
Message-ID<seffb-4Kg-5@gated-at.bofh.it>
In reply to#1477004
Dear Rui,

On Tue, 2016-09-06 at 08:30 +0800, Zhang Rui wrote:
> On 二, 2016-09-06 at 08:24 +0800, Zhang Rui wrote:
> > On 四, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:
> > > 
> > > This adds the thermal controller and auxadc nodes
> > > to the Mediatek MT2701 dtsi file.
> > > 
> > > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > > ---
> > > This patch depned on:
> > > https://patchwork.kernel.org/patch/9249589/
> > > https://patchwork.kernel.org/patch/9249589/
> > Hmm, does this mean that I should take all these three patches and
> > hold
> > the patches in next merge window until the above patch has been
> > merged?
> > 
Yes, this patch is base on auxadc patchset.

> Patch 3/3 can not be applied on top of upstream kernel, so I guess it
> still has some other dependencies.
> I think I can apply patch 1, 2 first. And patch 3/3 should be handled
> in the dt tree.

Sorry, this patch is also need Mediatek's clock patchset what I miss to
add in dependency list, I would resend this dt tree once clock patch
merge, or resend this for right dependency on next version, thank you.

> thanks,
> rui
> > thanks,
> > rui 
> > > 
> > > ---
> > >  arch/arm/boot/dts/mt2701.dtsi |   44
> > > +++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 44 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/mt2701.dtsi
> > > b/arch/arm/boot/dts/mt2701.dtsi
> > > index e9150a4..cee4724 100644
> > > --- a/arch/arm/boot/dts/mt2701.dtsi
> > > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > > @@ -87,6 +87,36 @@
> > >  		clock-output-names = "rtc32k";
> > >  	};
> > >  
> > > +	thermal-zones {
> > > +		cpu_thermal: cpu_thermal {
> > > +			polling-delay-passive = <1000>; /*
> > > milliseconds */
> > > +			polling-delay = <1000>; /* milliseconds */
> > > +
> > > +			thermal-sensors = <&thermal 0>;
> > > +			sustainable-power = <1000>;
> > > +
> > > +			trips {
> > > +				threshold: trip-point@0 {
> > > +					temperature = <68000>;
> > > +					hysteresis = <2000>;
> > > +					type = "passive";
> > > +				};
> > > +
> > > +				target: trip-point@1 {
> > > +					temperature = <85000>;
> > > +					hysteresis = <2000>;
> > > +					type = "passive";
> > > +				};
> > > +
> > > +				cpu_crit: cpu_crit@0 {
> > > +					temperature = <115000>;
> > > +					hysteresis = <2000>;
> > > +					type = "critical";
> > > +				};
> > > +			};
> > > +		};
> > > +	};
> > > +
> > >  	timer {
> > >  		compatible = "arm,armv7-timer";
> > >  		interrupt-parent = <&gic>;
> > > @@ -222,4 +252,18 @@
> > >  		clock-names = "baud", "bus";
> > >  		status = "disabled";
> > >  	};
> > > +
> > > +	thermal: thermal@1100b000 {
> > > +		#thermal-sensor-cells = <0>;
> > > +		compatible = "mediatek,mt2701-thermal";
> > > +		reg = <0 0x1100b000 0 0x1000>;
> > > +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> > > +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg
> > > CLK_PERI_AUXADC>;
> > > +		clock-names = "therm", "auxadc";
> > > +		resets = <&pericfg 0x10>;
> > > +		reset-names = "therm";
> > > +		mediatek,auxadc = <&auxadc>;
> > > +		mediatek,apmixedsys = <&apmixedsys>;
> > > +	};
> > > +
> > >  };
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm"
> > in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

[toc] | [prev] | [next] | [standalone]

#1478126

FromDawei Chien <dawei.chien@mediatek.com>
Date2016-09-07 11:50 +0200
Message-ID<seHEt-6pC-11@gated-at.bofh.it>
In reply to#1477046
On Tue, 2016-09-06 at 11:28 +0800, Dawei Chien wrote:
> Dear Rui,
> 
> On Tue, 2016-09-06 at 08:30 +0800, Zhang Rui wrote:
> > On 二, 2016-09-06 at 08:24 +0800, Zhang Rui wrote:
> > > On 四, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:
> > > > 
> > > > This adds the thermal controller and auxadc nodes
> > > > to the Mediatek MT2701 dtsi file.
> > > > 
> > > > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > > > ---
> > > > This patch depned on:
> > > > https://patchwork.kernel.org/patch/9249589/
> > > > https://patchwork.kernel.org/patch/9249589/
> > > Hmm, does this mean that I should take all these three patches and
> > > hold
> > > the patches in next merge window until the above patch has been
> > > merged?
> > > 
> Yes, this patch is base on auxadc patchset.
> 
> > Patch 3/3 can not be applied on top of upstream kernel, so I guess it
> > still has some other dependencies.
> > I think I can apply patch 1, 2 first. And patch 3/3 should be handled
> > in the dt tree.
> 
> Sorry, this patch is also need Mediatek's clock patchset what I miss to
> add in dependency list, I would resend this dt tree once clock patch
> merge, or resend this for right dependency on next version, thank you.

Actually, since patch1/patch2 would be OK so far, I would just only
resend patch3 after MTK clock pathcset ready, I prefer to merge
patch1/patch2 if possible, thank you.


> > thanks,
> > rui
> > > thanks,
> > > rui 
> > > > 
> > > > ---
> > > >  arch/arm/boot/dts/mt2701.dtsi |   44
> > > > +++++++++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 44 insertions(+)
> > > > 
> > > > diff --git a/arch/arm/boot/dts/mt2701.dtsi
> > > > b/arch/arm/boot/dts/mt2701.dtsi
> > > > index e9150a4..cee4724 100644
> > > > --- a/arch/arm/boot/dts/mt2701.dtsi
> > > > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > > > @@ -87,6 +87,36 @@
> > > >  		clock-output-names = "rtc32k";
> > > >  	};
> > > >  
> > > > +	thermal-zones {
> > > > +		cpu_thermal: cpu_thermal {
> > > > +			polling-delay-passive = <1000>; /*
> > > > milliseconds */
> > > > +			polling-delay = <1000>; /* milliseconds */
> > > > +
> > > > +			thermal-sensors = <&thermal 0>;
> > > > +			sustainable-power = <1000>;
> > > > +
> > > > +			trips {
> > > > +				threshold: trip-point@0 {
> > > > +					temperature = <68000>;
> > > > +					hysteresis = <2000>;
> > > > +					type = "passive";
> > > > +				};
> > > > +
> > > > +				target: trip-point@1 {
> > > > +					temperature = <85000>;
> > > > +					hysteresis = <2000>;
> > > > +					type = "passive";
> > > > +				};
> > > > +
> > > > +				cpu_crit: cpu_crit@0 {
> > > > +					temperature = <115000>;
> > > > +					hysteresis = <2000>;
> > > > +					type = "critical";
> > > > +				};
> > > > +			};
> > > > +		};
> > > > +	};
> > > > +
> > > >  	timer {
> > > >  		compatible = "arm,armv7-timer";
> > > >  		interrupt-parent = <&gic>;
> > > > @@ -222,4 +252,18 @@
> > > >  		clock-names = "baud", "bus";
> > > >  		status = "disabled";
> > > >  	};
> > > > +
> > > > +	thermal: thermal@1100b000 {
> > > > +		#thermal-sensor-cells = <0>;
> > > > +		compatible = "mediatek,mt2701-thermal";
> > > > +		reg = <0 0x1100b000 0 0x1000>;
> > > > +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> > > > +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg
> > > > CLK_PERI_AUXADC>;
> > > > +		clock-names = "therm", "auxadc";
> > > > +		resets = <&pericfg 0x10>;
> > > > +		reset-names = "therm";
> > > > +		mediatek,auxadc = <&auxadc>;
> > > > +		mediatek,apmixedsys = <&apmixedsys>;
> > > > +	};
> > > > +
> > > >  };
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-pm"
> > > in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web