Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1478269 > unrolled thread
| Started by | vadimp@mellanox.com |
|---|---|
| First post | 2016-09-07 15:00 +0200 |
| Last post | 2016-09-07 22:30 +0200 |
| Articles | 5 — 4 participants |
Back to article view | Back to linux.kernel
[patch 2/2] leds: add driver for Mellanox systems leds vadimp@mellanox.com - 2016-09-07 15:00 +0200
Re: [patch 2/2] leds: add driver for Mellanox systems leds Jacek Anaszewski <j.anaszewski@samsung.com> - 2016-09-07 15:20 +0200
Re: [patch 2/2] leds: add driver for Mellanox systems leds Jacek Anaszewski <j.anaszewski@samsung.com> - 2016-09-07 15:50 +0200
RE: [patch 2/2] leds: add driver for Mellanox systems leds Vadim Pasternak <vadimp@mellanox.com> - 2016-09-07 15:50 +0200
Re: [patch 2/2] leds: add driver for Mellanox systems leds Jacek Anaszewski <jacek.anaszewski@gmail.com> - 2016-09-07 22:30 +0200
| From | vadimp@mellanox.com |
|---|---|
| Date | 2016-09-07 15:00 +0200 |
| Subject | [patch 2/2] leds: add driver for Mellanox systems leds |
| Message-ID | <seKCm-8iW-23@gated-at.bofh.it> |
From: Vadim Pasternak <vadimp@mellanox.com>
Fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/leds/leds-mlxcpld.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
index 0ec2375..eeed35c 100644
--- a/drivers/leds/leds-mlxcpld.c
+++ b/drivers/leds/leds-mlxcpld.c
@@ -47,8 +47,8 @@
#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
/* Color codes for leds */
-#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink */
-#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink */
+#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink */
+#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink */
#define LED_IS_OFF 0x00 /* Off */
#define LED_RED_STATIC_ON 0x05 /* Solid red */
#define LED_RED_BLINK_HALF (LED_RED_STATIC_ON + LED_OFFSET_HALF)
@@ -237,7 +237,7 @@ static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
/* Each led is controlled through low or high nibble of the relevant
* CPLD register. Register offset is specified by off parameter.
* Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
- * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink
+ * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
* green.
* Parameter mask specifies which nibble is used for specific led: mask
* 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
@@ -274,8 +274,8 @@ static int mlxcpld_led_blink(struct led_classdev *led,
{
struct mlxcpld_led_priv *pled = cdev_to_priv(led);
- /* HW supports two types of blinking: full (6KHz) and half (3KHz).
- * For delay on/off zero default setting 3KHz is used.
+ /* HW supports two types of blinking: full (6Hz) and half (3Hz).
+ * For delay on/off zero default setting 3Hz is used.
*/
if (!(*delay_on == 0 && *delay_off == 0) &&
!(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ) &&
--
2.1.4
[toc] | [next] | [standalone]
| From | Jacek Anaszewski <j.anaszewski@samsung.com> |
|---|---|
| Date | 2016-09-07 15:20 +0200 |
| Message-ID | <seKVJ-db-51@gated-at.bofh.it> |
| In reply to | #1478269 |
Hi Vadim,
Please use git format-patch -n, where n is the number
of patches to be produced starting from your current git HEAD.
It will produce patches tagged [PATCH 1/2], [PATCH 2/2],
or starting from [PATCH 0/2] when added --cover-letter switch.
Now it looks as if this patch was a part of the patch set
comprising two patches, but I don't see the first one.
I assume that you added the numbering by hand and this one
was intended to be put in the one set with the following one:
[patch] leds: add driver for Mellanox systems leds
On 09/07/2016 04:53 PM, vadimp@mellanox.com wrote:
> From: Vadim Pasternak <vadimp@mellanox.com>
>
> Fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively.
>
> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> ---
> drivers/leds/leds-mlxcpld.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> index 0ec2375..eeed35c 100644
> --- a/drivers/leds/leds-mlxcpld.c
> +++ b/drivers/leds/leds-mlxcpld.c
> @@ -47,8 +47,8 @@
> #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
>
> /* Color codes for leds */
> -#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink */
> -#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink */
> +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink */
> +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink */
> #define LED_IS_OFF 0x00 /* Off */
> #define LED_RED_STATIC_ON 0x05 /* Solid red */
> #define LED_RED_BLINK_HALF (LED_RED_STATIC_ON + LED_OFFSET_HALF)
> @@ -237,7 +237,7 @@ static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
> /* Each led is controlled through low or high nibble of the relevant
> * CPLD register. Register offset is specified by off parameter.
> * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> - * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink
> + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> * green.
> * Parameter mask specifies which nibble is used for specific led: mask
> * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> @@ -274,8 +274,8 @@ static int mlxcpld_led_blink(struct led_classdev *led,
> {
> struct mlxcpld_led_priv *pled = cdev_to_priv(led);
>
> - /* HW supports two types of blinking: full (6KHz) and half (3KHz).
> - * For delay on/off zero default setting 3KHz is used.
> + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> + * For delay on/off zero default setting 3Hz is used.
> */
> if (!(*delay_on == 0 && *delay_off == 0) &&
> !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ) &&
>
--
Best regards,
Jacek Anaszewski
[toc] | [prev] | [next] | [standalone]
| From | Jacek Anaszewski <j.anaszewski@samsung.com> |
|---|---|
| Date | 2016-09-07 15:50 +0200 |
| Message-ID | <seLoJ-n1-3@gated-at.bofh.it> |
| In reply to | #1478293 |
On 09/07/2016 03:39 PM, Vadim Pasternak wrote: > Hi Jacek, > > The patch 2/2 I sent after Dave's review. > Now I have patch 1/2 and patch 2/2, produced with git format-patch -2 HEAD ... > But 1/2 is re-work after your comments. > > Would it be OK if I produce now new patch with all fixes as [patch v1], and starting from this point will follow [patch v2], etc? Please make it v3. -- Best regards, Jacek Anaszewski
[toc] | [prev] | [next] | [standalone]
| From | Vadim Pasternak <vadimp@mellanox.com> |
|---|---|
| Date | 2016-09-07 15:50 +0200 |
| Message-ID | <seLoJ-n1-5@gated-at.bofh.it> |
| In reply to | #1478293 |
Hi Jacek,
The patch 2/2 I sent after Dave's review.
Now I have patch 1/2 and patch 2/2, produced with git format-patch -2 HEAD ...
But 1/2 is re-work after your comments.
Would it be OK if I produce now new patch with all fixes as [patch v1], and starting from this point will follow [patch v2], etc?
Sorry for this mess.
Thanks,
Vadim.
> -----Original Message-----
> From: Jacek Anaszewski [mailto:j.anaszewski@samsung.com]
> Sent: Wednesday, September 07, 2016 4:11 PM
> To: Vadim Pasternak <vadimp@mellanox.com>; rpurdie@rpsys.net
> Cc: linux-leds@vger.kernel.org; linux-kernel@vger.kernel.org; jiri@resnulli.us;
> Michael Shych <michaelsh@mellanox.com>
> Subject: Re: [patch 2/2] leds: add driver for Mellanox systems leds
>
> Hi Vadim,
>
> Please use git format-patch -n, where n is the number of patches to be produced
> starting from your current git HEAD.
>
> It will produce patches tagged [PATCH 1/2], [PATCH 2/2], or starting from
> [PATCH 0/2] when added --cover-letter switch.
>
> Now it looks as if this patch was a part of the patch set comprising two patches,
> but I don't see the first one.
> I assume that you added the numbering by hand and this one was intended to be
> put in the one set with the following one:
>
> [patch] leds: add driver for Mellanox systems leds
>
> On 09/07/2016 04:53 PM, vadimp@mellanox.com wrote:
> > From: Vadim Pasternak <vadimp@mellanox.com>
> >
> > Fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively.
> >
> > Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> > ---
> > drivers/leds/leds-mlxcpld.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> > index 0ec2375..eeed35c 100644
> > --- a/drivers/leds/leds-mlxcpld.c
> > +++ b/drivers/leds/leds-mlxcpld.c
> > @@ -47,8 +47,8 @@
> > #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
> >
> > /* Color codes for leds */
> > -#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink
> */
> > -#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink
> */
> > +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink
> */
> > +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink
> */
> > #define LED_IS_OFF 0x00 /* Off */
> > #define LED_RED_STATIC_ON 0x05 /* Solid red */
> > #define LED_RED_BLINK_HALF (LED_RED_STATIC_ON +
> LED_OFFSET_HALF)
> > @@ -237,7 +237,7 @@ static void mlxcpld_led_store_hw(u8 mask, u8 off, u8
> vset)
> > /* Each led is controlled through low or high nibble of the relevant
> > * CPLD register. Register offset is specified by off parameter.
> > * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> > - * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink
> > + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> > * green.
> > * Parameter mask specifies which nibble is used for specific led: mask
> > * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> > @@ -274,8 +274,8 @@ static int mlxcpld_led_blink(struct led_classdev
> > *led, {
> > struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> >
> > - /* HW supports two types of blinking: full (6KHz) and half (3KHz).
> > - * For delay on/off zero default setting 3KHz is used.
> > + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> > + * For delay on/off zero default setting 3Hz is used.
> > */
> > if (!(*delay_on == 0 && *delay_off == 0) &&
> > !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ)
> &&
> >
>
>
> --
> Best regards,
> Jacek Anaszewski
[toc] | [prev] | [next] | [standalone]
| From | Jacek Anaszewski <jacek.anaszewski@gmail.com> |
|---|---|
| Date | 2016-09-07 22:30 +0200 |
| Message-ID | <seRDQ-4Ag-13@gated-at.bofh.it> |
| In reply to | #1478269 |
Hi Vadim,
Please just include these changes to the new version
of the patch.
On 09/07/2016 04:53 PM, vadimp@mellanox.com wrote:
> From: Vadim Pasternak <vadimp@mellanox.com>
>
> Fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively.
>
> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> ---
> drivers/leds/leds-mlxcpld.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> index 0ec2375..eeed35c 100644
> --- a/drivers/leds/leds-mlxcpld.c
> +++ b/drivers/leds/leds-mlxcpld.c
> @@ -47,8 +47,8 @@
> #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
>
> /* Color codes for leds */
> -#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink */
> -#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink */
> +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink */
> +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink */
> #define LED_IS_OFF 0x00 /* Off */
> #define LED_RED_STATIC_ON 0x05 /* Solid red */
> #define LED_RED_BLINK_HALF (LED_RED_STATIC_ON + LED_OFFSET_HALF)
> @@ -237,7 +237,7 @@ static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
> /* Each led is controlled through low or high nibble of the relevant
> * CPLD register. Register offset is specified by off parameter.
> * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> - * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink
> + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> * green.
> * Parameter mask specifies which nibble is used for specific led: mask
> * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> @@ -274,8 +274,8 @@ static int mlxcpld_led_blink(struct led_classdev *led,
> {
> struct mlxcpld_led_priv *pled = cdev_to_priv(led);
>
> - /* HW supports two types of blinking: full (6KHz) and half (3KHz).
> - * For delay on/off zero default setting 3KHz is used.
> + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> + * For delay on/off zero default setting 3Hz is used.
> */
> if (!(*delay_on == 0 && *delay_off == 0) &&
> !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ) &&
>
--
Best regards,
Jacek Anaszewski
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web