Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1475271 > unrolled thread

[PATCH 07/12] MIPS: Malta: Probe RTC via DT

Started byPaul Burton <paul.burton@imgtec.com>
First post2016-09-02 18:00 +0200
Last post2016-09-03 14:30 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 07/12] MIPS: Malta: Probe RTC via DT Paul Burton <paul.burton@imgtec.com> - 2016-09-02 18:00 +0200
    Re: [PATCH 07/12] MIPS: Malta: Probe RTC via DT Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-09-03 14:30 +0200

#1475271 — [PATCH 07/12] MIPS: Malta: Probe RTC via DT

FromPaul Burton <paul.burton@imgtec.com>
Date2016-09-02 18:00 +0200
Subject[PATCH 07/12] MIPS: Malta: Probe RTC via DT
Message-ID<scZ2O-1kr-1@gated-at.bofh.it>
Add the DT node required to probe the RTC, and remove the platform code
that was previously doing it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

 arch/mips/boot/dts/mti/malta.dts     | 15 +++++++++++++++
 arch/mips/mti-malta/malta-platform.c | 21 ---------------------
 2 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index af765af..ee43296 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -49,4 +49,19 @@
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc: mc146818@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
 };
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index e1dd1c1..6433a39 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -23,7 +23,6 @@
  */
 #include <linux/init.h>
 #include <linux/serial_8250.h>
-#include <linux/mc146818rtc.h>
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/mtd/partitions.h>
@@ -68,25 +67,6 @@ static struct platform_device malta_uart8250_device = {
 	},
 };
 
-struct resource malta_rtc_resources[] = {
-	{
-		.start	= RTC_PORT(0),
-		.end	= RTC_PORT(7),
-		.flags	= IORESOURCE_IO,
-	}, {
-		.start	= RTC_IRQ,
-		.end	= RTC_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device malta_rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= malta_rtc_resources,
-	.num_resources	= ARRAY_SIZE(malta_rtc_resources),
-};
-
 static struct mtd_partition malta_mtd_partitions[] = {
 	{
 		.name =		"YAMON",
@@ -129,7 +109,6 @@ static struct platform_device malta_flash_device = {
 
 static struct platform_device *malta_devices[] __initdata = {
 	&malta_uart8250_device,
-	&malta_rtc_device,
 	&malta_flash_device,
 };
 
-- 
2.9.3

[toc] | [next] | [standalone]


#1475616

FromSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date2016-09-03 14:30 +0200
Message-ID<sdif7-55W-13@gated-at.bofh.it>
In reply to#1475271
Hello.

On 9/2/2016 6:48 PM, Paul Burton wrote:

> Add the DT node required to probe the RTC, and remove the platform code
> that was previously doing it.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>
>  arch/mips/boot/dts/mti/malta.dts     | 15 +++++++++++++++
>  arch/mips/mti-malta/malta-platform.c | 21 ---------------------
>  2 files changed, 15 insertions(+), 21 deletions(-)
>
> diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
> index af765af..ee43296 100644
> --- a/arch/mips/boot/dts/mti/malta.dts
> +++ b/arch/mips/boot/dts/mti/malta.dts
> @@ -49,4 +49,19 @@
>  		interrupt-parent = <&gic>;
>  		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
>  	};
> +
> +	isa {
> +		compatible = "isa";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <1 0 0 0x1000>;
> +
> +		rtc: mc146818@70 {

    Should be the other way around: you can use the chip name as a label, but 
you have to use the device class as a node name.

> +			compatible = "motorola,mc146818";
> +			reg = <1 0x70 0x8>;
> +
> +			interrupt-parent = <&i8259>;
> +			interrupts = <8>;
> +		};
> +	};
>  };
[...]

MBR, Sergei

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web