Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1475888 > unrolled thread
| Started by | Andy Yan <andy.yan@rock-chips.com> |
|---|---|
| First post | 2016-09-04 10:40 +0200 |
| Last post | 2016-09-04 14:10 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 4/4] ARM: dts: use definition in rockchip pinctrl header to describe gpios on Popmetal-RK3288 Andy Yan <andy.yan@rock-chips.com> - 2016-09-04 10:40 +0200
Re: [PATCH 4/4] ARM: dts: use definition in rockchip pinctrl header to describe gpios on Popmetal-RK3288 kbuild test robot <lkp@intel.com> - 2016-09-04 14:10 +0200
| From | Andy Yan <andy.yan@rock-chips.com> |
|---|---|
| Date | 2016-09-04 10:40 +0200 |
| Subject | [PATCH 4/4] ARM: dts: use definition in rockchip pinctrl header to describe gpios on Popmetal-RK3288 |
| Message-ID | <sdB86-6mo-13@gated-at.bofh.it> |
Use definition in rockchip pinctrl header to describe
gpios, this will make it more clearer.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm/boot/dts/rk3288-popmetal.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 706c67c..88f4ad0 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -72,7 +72,7 @@
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 GPIO_A5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -83,7 +83,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 GPIO_A6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -98,7 +98,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 GPIO_B3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -132,7 +132,7 @@
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 GPIO0_C1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -178,7 +178,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 GPIO_B0 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
@@ -447,43 +447,43 @@
&pinctrl {
ak8963 {
comp_int: comp-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO8 GPIO_A1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
buttons {
pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
dvp {
dvp_pwr: dvp-pwr {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO0 GPIO_C1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
mma8452 {
gsensor_int: gsensor-int {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO8 GPIO_A0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO7 GPIO_B3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
--
2.7.4
[toc] | [next] | [standalone]
| From | kbuild test robot <lkp@intel.com> |
|---|---|
| Date | 2016-09-04 14:10 +0200 |
| Subject | Re: [PATCH 4/4] ARM: dts: use definition in rockchip pinctrl header to describe gpios on Popmetal-RK3288 |
| Message-ID | <sdEpj-5sq-7@gated-at.bofh.it> |
| In reply to | #1475888 |
[Multipart message — attachments visible in raw view] — view raw
Hi Andy,
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on v4.8-rc4 next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on]
[Check https://git-scm.com/docs/git-format-patch for more information]
url: https://github.com/0day-ci/linux/commits/Andy-Yan/One-fix-and-some-improvements-for-RK3288-Popmetal-board/20160904-164007
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-aspeed_g4_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/rk3288-popmetal.dts:131.18-19 syntax error
>> FATAL ERROR: Unable to parse input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web