Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1473983 > unrolled thread
| Started by | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| First post | 2016-09-01 02:50 +0200 |
| Last post | 2016-09-01 02:50 +0200 |
| Articles | 20 on this page of 33 — 5 participants |
Back to article view | Back to linux.kernel
[PATCH v3 00/22] Support qcom's HSIC USB and rewrite USB2 HS phy support Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 06/22] usb: chipidea: Add platform flag for wrapper phy management Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 12/22] usb: chipidea: msm: Rely on core to override AHBBURST Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 16/22] usb: chipidea: msm: Restore wrapper settings after reset Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 11/22] usb: chipidea: msm: Mark device as runtime pm active Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one place Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:00 +0200
[PATCH v3 17/22] usb: chipidea: msm: Make platform data driver local instead of global Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 03/22] usb: ulpi: Support device discovery via device properties Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties Heikki Krogerus <heikki.krogerus@linux.intel.com> - 2016-09-02 16:20 +0200
Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-03 03:20 +0200
[PATCH v3 20/22] usb: chipidea: msm: Be silent on probe defer errors Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 15/22] usb: chipidea: msm: Mux over secondary phy at the right time Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 13/22] usb: chipidea: msm: Use hw_write_id_reg() instead of writel Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 19/22] usb: chipidea: msm: Handle phy power states Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 22/22] phy: Add support for Qualcomm's USB HS phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 05/22] usb: chipidea: Handle extcon events properly Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 01/22] of: device: Support loading a module with OF based modalias Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 02/22] of: device: Export of_device_{get_modalias,uvent_modalias} to modules Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 14/22] usb: chipidea: msm: Add proper clk and reset support Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
[PATCH v3 09/22] usb: chipidea: Add support for ULPI PHY bus Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 09/22] usb: chipidea: Add support for ULPI PHY bus Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:00 +0200
[PATCH v3 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:50 +0200
[PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:30 +0200
Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-03 03:10 +0200
Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Peter Chen <hzpeterchen@gmail.com> - 2016-09-05 04:40 +0200
Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-06 19:50 +0200
[PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Re: [PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy Vivek Gautam <vivek.gautam@codeaurora.org> - 2016-09-01 08:20 +0200
Re: [PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy vivek.gautam@codeaurora.org - 2016-09-02 13:30 +0200
[PATCH v3 07/22] usb: chipidea: Notify events when switching host mode Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
Page 1 of 2 [1] 2 Next page →
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 00/22] Support qcom's HSIC USB and rewrite USB2 HS phy support |
| Message-ID | <scomB-15L-3@gated-at.bofh.it> |
The state of USB ChipIdea support on Qualcomm's platforms is not great.
The DT description of these devices requires up to three different nodes
for what amounts to be the same hardware block, when there should really
only be one. Furthermore, the "phy" driver that is in mainline (phy-msm-usb.c)
duplicates the OTG state machine and touches the ci controller wrapper
registers when it should really be focused on the phy and the ULPI accesses
needed to get the phy working. There's also a slimmed down phy driver for
the msm8916 platform, but really the phy hardware is the same as other MSMs,
so we have two drivers doing pretty much the same thing. This leads to a
situtaion where we have the chipidea core driver, the "phy" driver, and
sometimes the ehci-msm.c driver operating the same device all at the same
time with very little coordination. This just isn't very safe and is
confusing from a driver perspective when trying to figure out who does what.
Finally, there isn't any HSIC support on platforms like apq8074 so we
should add that.
This patch series updates the ChipIdea driver and the MSM wrapper
(ci_hdrc_msm.c) to properly handle the PHY and wrapper bits at the right
times in the right places. To get there, we update the ChipIdea core to
have support for the ULPI phy bus introduced by Heikki. Along the way
we fix bugs with the extcon handling for peripheral and OTG mode controllers
and move the parts of phy-usb-msm.c that are touching the CI controller
wrapper into the wrapper driver (ci_hdrc_msm.c). Finally we add support
for the HSIC phy based on the ULPI bus and rewrite the HS phy driver
(phy-usb-msm.c) as a standard ULPI phy driver.
Once this series is accepted, we should be able to delete the phy-usb-msm.c,
phy-qcom-8x16-usb.c, and ehci-msm.c drivers from the tree and use the ULPI
based phy driver (which also lives in drivers/phy/ instead of drivers/usb/phy/)
and the chipidea host core instead.
I've also sent separate patches for other minor pieces to make this
all work. The full tree can be found here[3], hacks and all to get
things working. I've tested this on the db410c, apq8074 dragonboard,
and ifc6410 with configfs gadgets and otg cables.
Patches based on v4.8-rc1
Changes from v2:
* Added SoC specific compatibles in phy bindings
* Dropped AVVIS patch for OTG statemachine
* New patch to consolidate extcon handlers
* Picked up Acks from Peter
* Rebased onto v4.8-rc1
* Reworked ULPI OF code to look at vid == 0 instead of pid == 0
* Dropped ULPI bindings for vid and pid overrides
Changes from v1:
* Reworked ULPI device probing to keep using vendor/product ids that
come from DT if needed and falls back to OF style match when product id
is 0
* PHY init later patch was rejected so that moved to a quirk flag and
the msm wrapper started managing the phy on/off
* Updated clk requirements for HSIC phy in binding doc
* Added optional clk in wrapper for "housekeeping" found on older qcom
platforms
* Bug fix to OTGSC polling function
* Changed runtime PM patch to set as active instead of get/put
TODO:
* DMA fails on arm64 so we need something like [1] to make it work.
* The db410c needs a driver to toggle the onboard switch to connect
the usb hub instead of micro port when the usb cable is disconnected
* apq8064 platforms need a vbus regulator to really use otg and I haven't
tried out the RPM based regulators yet
* The HSIC phy on the apq8074 dragonboard is connected to a usb4604
device which requires the i2c driver to probe and send an i2c
sequence before the HSIC controller enumerates or HSIC doesn't work.
Right now I have a hack to force the controller to probe defer
once so that usb4604 probes first. This needs a more proper solution
like having the DT describe a linkage between the controller and
the usb device so we can enforce probe ordering.
* OTG support requires a working VBUS supply on apq8074 dragonboard
and that requires changes to the smbb_charger driver to support
the OTG OVP switch as a regulator[2]. This series needs revival
on the list so that OTG works properly on that board.
[1] https://lkml.org/lkml/2016/2/22/7
[2] http://lkml.kernel.org/g/1449621618-11900-1-git-send-email-tim.bird@sonymobile.com
[3] https://git.linaro.org/people/stephen.boyd/linux.git/shortlog/refs/heads/usb-hsic-8074
Stephen Boyd (22):
of: device: Support loading a module with OF based modalias
of: device: Export of_device_{get_modalias,uvent_modalias} to modules
usb: ulpi: Support device discovery via device properties
usb: chipidea: Only read/write OTGSC from one place
usb: chipidea: Handle extcon events properly
usb: chipidea: Add platform flag for wrapper phy management
usb: chipidea: Notify events when switching host mode
usb: chipidea: Remove locking in ci_udc_start()
usb: chipidea: Add support for ULPI PHY bus
usb: chipidea: Consolidate extcon notifiers
usb: chipidea: msm: Mark device as runtime pm active
usb: chipidea: msm: Rely on core to override AHBBURST
usb: chipidea: msm: Use hw_write_id_reg() instead of writel
usb: chipidea: msm: Add proper clk and reset support
usb: chipidea: msm: Mux over secondary phy at the right time
usb: chipidea: msm: Restore wrapper settings after reset
usb: chipidea: msm: Make platform data driver local instead of global
usb: chipidea: msm: Add reset controller for PHY POR bit
usb: chipidea: msm: Handle phy power states
usb: chipidea: msm: Be silent on probe defer errors
phy: Add support for Qualcomm's USB HSIC phy
phy: Add support for Qualcomm's USB HS phy
.../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 83 ++++++
.../devicetree/bindings/phy/qcom,usb-hsic-phy.txt | 65 +++++
Documentation/devicetree/bindings/usb/ulpi.txt | 20 ++
drivers/of/device.c | 25 ++
drivers/phy/Kconfig | 15 ++
drivers/phy/Makefile | 2 +
drivers/phy/phy-qcom-usb-hs.c | 288 +++++++++++++++++++++
drivers/phy/phy-qcom-usb-hsic.c | 160 ++++++++++++
drivers/usb/chipidea/Kconfig | 8 +
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci.h | 22 +-
drivers/usb/chipidea/ci_hdrc_msm.c | 280 +++++++++++++++++---
drivers/usb/chipidea/core.c | 118 ++++-----
drivers/usb/chipidea/host.c | 10 +
drivers/usb/chipidea/otg.c | 84 +++++-
drivers/usb/chipidea/udc.c | 3 -
drivers/usb/chipidea/ulpi.c | 113 ++++++++
drivers/usb/common/ulpi.c | 73 +++++-
include/linux/of_device.h | 6 +
include/linux/usb/chipidea.h | 5 +-
20 files changed, 1252 insertions(+), 129 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/ulpi.txt
create mode 100644 drivers/phy/phy-qcom-usb-hs.c
create mode 100644 drivers/phy/phy-qcom-usb-hsic.c
create mode 100644 drivers/usb/chipidea/ulpi.c
--
2.9.0.rc2.8.ga28705d
[toc] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 06/22] usb: chipidea: Add platform flag for wrapper phy management |
| Message-ID | <scomB-15L-9@gated-at.bofh.it> |
| In reply to | #1473983 |
The ULPI phy on qcom platforms needs to be initialized and
powered on after a USB reset and before we toggle the run/stop
bit. Otherwise, the phy locks up and doesn't work properly.
Therefore, add a flag to skip any phy power management in the
core layer, leaving it up to the glue driver to manage.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/core.c | 6 ++++++
include/linux/usb/chipidea.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 01390e02ee53..532085a096d9 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -361,6 +361,9 @@ static int _ci_usb_phy_init(struct ci_hdrc *ci)
*/
static void ci_usb_phy_exit(struct ci_hdrc *ci)
{
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return;
+
if (ci->phy) {
phy_power_off(ci->phy);
phy_exit(ci->phy);
@@ -379,6 +382,9 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
{
int ret;
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return 0;
+
switch (ci->platdata->phy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
case USBPHY_INTERFACE_MODE_UTMIW:
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index f9be467d6695..d07b162073f7 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -57,6 +57,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
#define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
+#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 12/22] usb: chipidea: msm: Rely on core to override AHBBURST |
| Message-ID | <scomB-15L-7@gated-at.bofh.it> |
| In reply to | #1473983 |
The core framework already handles setting this parameter with a
platform quirk. Add the appropriate flag so that we always set
AHBBURST to 0. Technically DT should be doing this, but we always
do it for msm chipidea devices so setting the flag in the driver
works just as well. If the burst needs to be anything besides 0,
we expect the 'ahb-burst-config' dts property to be present.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 89c1a02d69b5..719b20caf88e 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -24,7 +24,6 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
- writel(0, USB_AHBBURST);
/* use AHB transactor, allow posted data writes */
writel(0x8, USB_AHBMODE);
usb_phy_init(ci->usb_phy);
@@ -47,7 +46,8 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
.name = "ci_hdrc_msm",
.capoffset = DEF_CAPOFFSET,
.flags = CI_HDRC_REGS_SHARED |
- CI_HDRC_DISABLE_STREAMING,
+ CI_HDRC_DISABLE_STREAMING |
+ CI_HDRC_OVERRIDE_AHB_BURST,
.notify_event = ci_hdrc_msm_notify_event,
};
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 16/22] usb: chipidea: msm: Restore wrapper settings after reset |
| Message-ID | <scomB-15L-5@gated-at.bofh.it> |
| In reply to | #1473983 |
When the RESET bit is set in the USBCMD register it resets quite
a few of the wrapper's registers to their reset state. This
includes the GENCONFIG and GENCONFIG2 registers. Currently this
is done by the usb phy and ehci-msm drivers writing into the
controller wrapper's MMIO address space. Let's consolidate the
register writes into the wrapper driver instead so that we
clearly split the wrapper from the phys.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 39 ++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 4b0aadc2be2f..333817291798 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -14,11 +14,22 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/io.h>
+#include <linux/extcon.h>
+#include <linux/of.h>
#include "ci.h"
#define HS_PHY_AHB_MODE 0x0098
+#define HS_PHY_GENCONFIG 0x009c
+#define HS_PHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
+
+#define HS_PHY_GENCONFIG_2 0x00a0
+#define HS_PHY_SESS_VLD_CTRL_EN BIT(7)
+#define HS_PHY_ULPI_TX_PKT_EN_CLR_FIX BIT(19)
+
+#define HSPHY_SESS_VLD_CTRL BIT(25)
+
/* Vendor base starts at 0x200 beyond CI base */
#define HS_PHY_SEC_CTRL 0x0078
#define HS_PHY_DIG_CLAMP_N BIT(16)
@@ -29,6 +40,7 @@ struct ci_hdrc_msm {
struct clk *iface_clk;
struct clk *fs_clk;
bool secondary_phy;
+ bool hsic;
void __iomem *base;
};
@@ -48,6 +60,24 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
/* use AHB transactor, allow posted data writes */
hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
+
+ /* workaround for rx buffer collision issue */
+ hw_write_id_reg(ci, HS_PHY_GENCONFIG,
+ HS_PHY_TXFIFO_IDLE_FORCE_DIS, 0);
+
+ if (!msm_ci->hsic)
+ hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+ HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
+
+ if (!IS_ERR(ci->platdata->vbus_extcon.edev)) {
+ hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+ HS_PHY_SESS_VLD_CTRL_EN,
+ HS_PHY_SESS_VLD_CTRL_EN);
+ hw_write(ci, OP_USBCMD, HSPHY_SESS_VLD_CTRL,
+ HSPHY_SESS_VLD_CTRL);
+
+ }
+
usb_phy_init(ci->usb_phy);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
@@ -116,6 +146,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
struct reset_control *reset;
struct resource *res;
int ret;
+ struct device_node *ulpi_node, *phy_node;
dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
@@ -181,6 +212,14 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
if (ret)
goto err_mux;
+ ulpi_node = of_find_node_by_name(pdev->dev.of_node, "ulpi");
+ if (ulpi_node) {
+ phy_node = of_get_next_available_child(ulpi_node, NULL);
+ ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy");
+ of_node_put(phy_node);
+ }
+ of_node_put(ulpi_node);
+
plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci_hdrc_msm_platdata);
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 11/22] usb: chipidea: msm: Mark device as runtime pm active |
| Message-ID | <scomB-15L-11@gated-at.bofh.it> |
| In reply to | #1473983 |
We're not properly marking the glue layer/wrapper device as runtime active, so runtime PM believes that the hardware state is inactive when we call pm_runtime_enable() in this driver. This causes a problem when the glue layer has a power domain associated with it, because runtime PM will go and disable the power domain to match the 'inactive' state of the device. Let's mark the device as active so that runtime PM doesn't improperly power down this device when it's actually active. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> --- drivers/usb/chipidea/ci_hdrc_msm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 3889809fd0c4..89c1a02d69b5 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -80,6 +80,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) platform_set_drvdata(pdev, plat_ci); + pm_runtime_set_active(&pdev->dev); pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); -- 2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one place |
| Message-ID | <scomB-15L-15@gated-at.bofh.it> |
| In reply to | #1473983 |
With the id and vbus detection done via extcon we need to make
sure we poll the status of OTGSC properly by considering what the
extcon is saying, and not just what the register is saying. Let's
move this hw_wait_reg() function to the only place it's used and
simplify it for polling the OTGSC register. Then we can make
certain we only use the hw_read_otgsc() API to read OTGSC, which
will make sure we properly handle extcon events.
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci.h | 3 ---
drivers/usb/chipidea/core.c | 32 --------------------------------
drivers/usb/chipidea/otg.c | 34 ++++++++++++++++++++++++++++++----
3 files changed, 30 insertions(+), 39 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index cd414559040f..05bc4d631cb9 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -428,9 +428,6 @@ int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
u8 hw_port_test_get(struct ci_hdrc *ci);
-int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
- u32 value, unsigned int timeout_ms);
-
void ci_platform_configure(struct ci_hdrc *ci);
int dbg_create_files(struct ci_hdrc *ci);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 69426e644d17..01390e02ee53 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -516,38 +516,6 @@ int hw_device_reset(struct ci_hdrc *ci)
return 0;
}
-/**
- * hw_wait_reg: wait the register value
- *
- * Sometimes, it needs to wait register value before going on.
- * Eg, when switch to device mode, the vbus value should be lower
- * than OTGSC_BSV before connects to host.
- *
- * @ci: the controller
- * @reg: register index
- * @mask: mast bit
- * @value: the bit value to wait
- * @timeout_ms: timeout in millisecond
- *
- * This function returns an error code if timeout
- */
-int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
- u32 value, unsigned int timeout_ms)
-{
- unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
-
- while (hw_read(ci, reg, mask) != value) {
- if (time_after(jiffies, elapse)) {
- dev_err(ci->dev, "timeout waiting for %08x in %d\n",
- mask, reg);
- return -ETIMEDOUT;
- }
- msleep(20);
- }
-
- return 0;
-}
-
static irqreturn_t ci_irq(int irq, void *data)
{
struct ci_hdrc *ci = data;
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 03b6743461d1..a829607c3e4d 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -104,7 +104,31 @@ void ci_handle_vbus_change(struct ci_hdrc *ci)
usb_gadget_vbus_disconnect(&ci->gadget);
}
-#define CI_VBUS_STABLE_TIMEOUT_MS 5000
+/**
+ * When we switch to device mode, the vbus value should be lower
+ * than OTGSC_BSV before connecting to host.
+ *
+ * @ci: the controller
+ *
+ * This function returns an error code if timeout
+ */
+static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
+{
+ unsigned long elapse = jiffies + msecs_to_jiffies(5000);
+ u32 mask = OTGSC_BSV;
+
+ while (hw_read_otgsc(ci, mask)) {
+ if (time_after(jiffies, elapse)) {
+ dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
+ mask);
+ return -ETIMEDOUT;
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
static void ci_handle_id_switch(struct ci_hdrc *ci)
{
enum ci_role role = ci_otg_role(ci);
@@ -116,9 +140,11 @@ static void ci_handle_id_switch(struct ci_hdrc *ci)
ci_role_stop(ci);
if (role == CI_ROLE_GADGET)
- /* wait vbus lower than OTGSC_BSV */
- hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
- CI_VBUS_STABLE_TIMEOUT_MS);
+ /*
+ * wait vbus lower than OTGSC_BSV before connecting
+ * to host
+ */
+ hw_wait_vbus_lower_bsv(ci);
ci_role_start(ci, role);
}
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Peter Chen <hzpeterchen@gmail.com> |
|---|---|
| Date | 2016-09-02 05:00 +0200 |
| Subject | Re: [PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one place |
| Message-ID | <scMRX-1Zy-1@gated-at.bofh.it> |
| In reply to | #1473989 |
On Wed, Aug 31, 2016 at 05:40:18PM -0700, Stephen Boyd wrote:
> With the id and vbus detection done via extcon we need to make
> sure we poll the status of OTGSC properly by considering what the
> extcon is saying, and not just what the register is saying. Let's
> move this hw_wait_reg() function to the only place it's used and
> simplify it for polling the OTGSC register. Then we can make
> certain we only use the hw_read_otgsc() API to read OTGSC, which
> will make sure we properly handle extcon events.
>
> Cc: Peter Chen <peter.chen@nxp.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> ---
> drivers/usb/chipidea/ci.h | 3 ---
> drivers/usb/chipidea/core.c | 32 --------------------------------
> drivers/usb/chipidea/otg.c | 34 ++++++++++++++++++++++++++++++----
> 3 files changed, 30 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
> index cd414559040f..05bc4d631cb9 100644
> --- a/drivers/usb/chipidea/ci.h
> +++ b/drivers/usb/chipidea/ci.h
> @@ -428,9 +428,6 @@ int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
>
> u8 hw_port_test_get(struct ci_hdrc *ci);
>
> -int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
> - u32 value, unsigned int timeout_ms);
> -
> void ci_platform_configure(struct ci_hdrc *ci);
>
> int dbg_create_files(struct ci_hdrc *ci);
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 69426e644d17..01390e02ee53 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -516,38 +516,6 @@ int hw_device_reset(struct ci_hdrc *ci)
> return 0;
> }
>
> -/**
> - * hw_wait_reg: wait the register value
> - *
> - * Sometimes, it needs to wait register value before going on.
> - * Eg, when switch to device mode, the vbus value should be lower
> - * than OTGSC_BSV before connects to host.
> - *
> - * @ci: the controller
> - * @reg: register index
> - * @mask: mast bit
> - * @value: the bit value to wait
> - * @timeout_ms: timeout in millisecond
> - *
> - * This function returns an error code if timeout
> - */
> -int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
> - u32 value, unsigned int timeout_ms)
> -{
> - unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
> -
> - while (hw_read(ci, reg, mask) != value) {
> - if (time_after(jiffies, elapse)) {
> - dev_err(ci->dev, "timeout waiting for %08x in %d\n",
> - mask, reg);
> - return -ETIMEDOUT;
> - }
> - msleep(20);
> - }
> -
> - return 0;
> -}
> -
> static irqreturn_t ci_irq(int irq, void *data)
> {
> struct ci_hdrc *ci = data;
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 03b6743461d1..a829607c3e4d 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -104,7 +104,31 @@ void ci_handle_vbus_change(struct ci_hdrc *ci)
> usb_gadget_vbus_disconnect(&ci->gadget);
> }
>
> -#define CI_VBUS_STABLE_TIMEOUT_MS 5000
> +/**
> + * When we switch to device mode, the vbus value should be lower
> + * than OTGSC_BSV before connecting to host.
> + *
> + * @ci: the controller
> + *
> + * This function returns an error code if timeout
> + */
> +static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
> +{
> + unsigned long elapse = jiffies + msecs_to_jiffies(5000);
> + u32 mask = OTGSC_BSV;
> +
> + while (hw_read_otgsc(ci, mask)) {
> + if (time_after(jiffies, elapse)) {
> + dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
> + mask);
> + return -ETIMEDOUT;
> + }
> + msleep(20);
> + }
> +
> + return 0;
> +}
> +
> static void ci_handle_id_switch(struct ci_hdrc *ci)
> {
> enum ci_role role = ci_otg_role(ci);
> @@ -116,9 +140,11 @@ static void ci_handle_id_switch(struct ci_hdrc *ci)
> ci_role_stop(ci);
>
> if (role == CI_ROLE_GADGET)
> - /* wait vbus lower than OTGSC_BSV */
> - hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
> - CI_VBUS_STABLE_TIMEOUT_MS);
> + /*
> + * wait vbus lower than OTGSC_BSV before connecting
> + * to host
> + */
> + hw_wait_vbus_lower_bsv(ci);
>
> ci_role_start(ci, role);
> }
Acked-by: Peter Chen <peter.chen@nxp.com>
--
Best Regards,
Peter Chen
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 17/22] usb: chipidea: msm: Make platform data driver local instead of global |
| Message-ID | <scomB-15L-17@gated-at.bofh.it> |
| In reply to | #1473983 |
If two devices are probed with this same driver, they'll share
the same platform data structure, while the chipidea core layer
writes and modifies it. This can lead to interesting results
especially if one device is an OTG type chipidea controller and
another is a host. Let's create a copy of this structure per each
device instance so that odd things don't happen.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 333817291798..2489a63d3e75 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -39,6 +39,7 @@ struct ci_hdrc_msm {
struct clk *core_clk;
struct clk *iface_clk;
struct clk *fs_clk;
+ struct ci_hdrc_platform_data pdata;
bool secondary_phy;
bool hsic;
void __iomem *base;
@@ -94,16 +95,6 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
}
}
-static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
- .name = "ci_hdrc_msm",
- .capoffset = DEF_CAPOFFSET,
- .flags = CI_HDRC_REGS_SHARED |
- CI_HDRC_DISABLE_STREAMING |
- CI_HDRC_OVERRIDE_AHB_BURST,
-
- .notify_event = ci_hdrc_msm_notify_event,
-};
-
static int ci_hdrc_msm_mux_phy(struct ci_hdrc_msm *ci,
struct platform_device *pdev)
{
@@ -164,7 +155,12 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
if (IS_ERR(phy))
return PTR_ERR(phy);
- ci_hdrc_msm_platdata.usb_phy = phy;
+ ci->pdata.name = "ci_hdrc_msm";
+ ci->pdata.capoffset = DEF_CAPOFFSET;
+ ci->pdata.flags = CI_HDRC_REGS_SHARED | CI_HDRC_DISABLE_STREAMING |
+ CI_HDRC_OVERRIDE_AHB_BURST;
+ ci->pdata.notify_event = ci_hdrc_msm_notify_event;
+ ci->pdata.usb_phy = phy;
reset = devm_reset_control_get(&pdev->dev, "core");
if (IS_ERR(reset))
@@ -220,9 +216,8 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
}
of_node_put(ulpi_node);
- plat_ci = ci_hdrc_add_device(&pdev->dev,
- pdev->resource, pdev->num_resources,
- &ci_hdrc_msm_platdata);
+ plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource,
+ pdev->num_resources, &ci->pdata);
if (IS_ERR(plat_ci)) {
dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
ret = PTR_ERR(plat_ci);
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties |
| Message-ID | <scomB-15L-13@gated-at.bofh.it> |
| In reply to | #1473983 |
The qcom HSIC ULPI phy doesn't have any bits set in the vendor or
product ID registers. This makes it impossible to make a ULPI
driver match against the ID registers. Add support to discover
the ULPI phys via DT help alleviate this problem. In the DT case,
we'll look for a ULPI bus node underneath the device registering
the ULPI viewport (or the parent of that device to support
chipidea's device layout) and then match up the phy node
underneath that with the ULPI device that's created.
The side benefit of this is that we can use standard properties
in the phy node like clks, regulators, gpios, etc. because we
don't have firmware like ACPI to turn these things on for us. And
we can use the DT phy binding to point our phy consumer to the
phy provider.
The ULPI bus code supports native enumeration by reading the
vendor ID and product ID registers at device creation time, but
we can't be certain that those register reads will succeed if the
phy is not powered up. To avoid any problems with reading the ID
registers before the phy is powered we fallback to DT matching
when the ID reads fail.
If the ULPI spec had some generic power sequencing for these
registers we could put that into the ULPI bus layer and power up
the device before reading the ID registers. Unfortunately this
doesn't exist and the power sequence is usually device specific.
By having the vendor and product ID properties in ACPI or DT, we
can match up devices with drivers without having to read the
hardware before it's powered up and avoid this problem.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
Documentation/devicetree/bindings/usb/ulpi.txt | 20 +++++++
drivers/usb/common/ulpi.c | 73 +++++++++++++++++++++++++-
2 files changed, 91 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ulpi.txt
diff --git a/Documentation/devicetree/bindings/usb/ulpi.txt b/Documentation/devicetree/bindings/usb/ulpi.txt
new file mode 100644
index 000000000000..ca179dc4bd50
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ulpi.txt
@@ -0,0 +1,20 @@
+ULPI bus binding
+----------------
+
+Phys that are behind a ULPI connection can be described with the following
+binding. The host controller shall have a "ulpi" named node as a child, and
+that node shall have one enabled node underneath it representing the ulpi
+device on the bus.
+
+EXAMPLE
+-------
+
+usb {
+ compatible = "vendor,usb-controller";
+
+ ulpi {
+ phy {
+ compatible = "vendor,phy";
+ };
+ };
+};
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 01c0c0477a9e..33039a374847 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -16,6 +16,9 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk/clk-conf.h>
/* -------------------------------------------------------------------------- */
@@ -39,6 +42,10 @@ static int ulpi_match(struct device *dev, struct device_driver *driver)
struct ulpi *ulpi = to_ulpi_dev(dev);
const struct ulpi_device_id *id;
+ /* Some ULPI devices don't have a vendor id so rely on OF match */
+ if (ulpi->id.vendor == 0)
+ return of_driver_match_device(dev, driver);
+
for (id = drv->id_table; id->vendor; id++)
if (id->vendor == ulpi->id.vendor &&
id->product == ulpi->id.product)
@@ -50,6 +57,11 @@ static int ulpi_match(struct device *dev, struct device_driver *driver)
static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct ulpi *ulpi = to_ulpi_dev(dev);
+ int ret;
+
+ ret = of_device_uevent_modalias(dev, env);
+ if (ret != -ENODEV)
+ return ret;
if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x",
ulpi->id.vendor, ulpi->id.product))
@@ -60,6 +72,11 @@ static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env)
static int ulpi_probe(struct device *dev)
{
struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+ int ret;
+
+ ret = of_clk_set_defaults(dev->of_node, false);
+ if (ret < 0)
+ return ret;
return drv->probe(to_ulpi_dev(dev));
}
@@ -87,8 +104,13 @@ static struct bus_type ulpi_bus = {
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ int len;
struct ulpi *ulpi = to_ulpi_dev(dev);
+ len = of_device_get_modalias(dev, buf, PAGE_SIZE - 1);
+ if (len != -ENODEV)
+ return len;
+
return sprintf(buf, "ulpi:v%04xp%04x\n",
ulpi->id.vendor, ulpi->id.product);
}
@@ -152,7 +174,30 @@ EXPORT_SYMBOL_GPL(ulpi_unregister_driver);
/* -------------------------------------------------------------------------- */
-static int ulpi_register(struct device *dev, struct ulpi *ulpi)
+static int ulpi_of_register(struct ulpi *ulpi)
+{
+ struct device_node *np = NULL, *child;
+
+ /* Find a ulpi bus underneath the parent or the parent of the parent */
+ if (ulpi->dev.parent->of_node)
+ np = of_find_node_by_name(ulpi->dev.parent->of_node, "ulpi");
+ else if (ulpi->dev.parent->parent && ulpi->dev.parent->parent->of_node)
+ np = of_find_node_by_name(ulpi->dev.parent->parent->of_node,
+ "ulpi");
+ if (!np)
+ return 0;
+
+ child = of_get_next_available_child(np, NULL);
+ of_node_put(np);
+ if (!child)
+ return -EINVAL;
+
+ ulpi->dev.of_node = child;
+
+ return 0;
+}
+
+static int ulpi_read_id(struct ulpi *ulpi)
{
int ret;
@@ -174,14 +219,37 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
+ return 0;
+}
+
+static int ulpi_register(struct device *dev, struct ulpi *ulpi)
+{
+ int ret;
+
ulpi->dev.parent = dev;
ulpi->dev.bus = &ulpi_bus;
ulpi->dev.type = &ulpi_dev_type;
dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
+ if (IS_ENABLED(CONFIG_OF)) {
+ ret = ulpi_of_register(ulpi);
+ if (ret)
+ return ret;
+ }
+
ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
- request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
+ ret = ulpi_read_id(ulpi);
+ /*
+ * Ignore failure in case of DT node because the device may
+ * not be powered up yet but we can still match by compatible
+ */
+ if (ret && !ulpi->dev.of_node)
+ return ret;
+
+ if (of_device_request_module(&ulpi->dev))
+ request_module("ulpi:v%04xp%04x", ulpi->id.vendor,
+ ulpi->id.product);
ret = device_register(&ulpi->dev);
if (ret)
@@ -232,6 +300,7 @@ EXPORT_SYMBOL_GPL(ulpi_register_interface);
*/
void ulpi_unregister_interface(struct ulpi *ulpi)
{
+ of_node_put(ulpi->dev.of_node);
device_unregister(&ulpi->dev);
}
EXPORT_SYMBOL_GPL(ulpi_unregister_interface);
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Heikki Krogerus <heikki.krogerus@linux.intel.com> |
|---|---|
| Date | 2016-09-02 16:20 +0200 |
| Subject | Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties |
| Message-ID | <scXu2-wL-15@gated-at.bofh.it> |
| In reply to | #1473991 |
Hi,
On Wed, Aug 31, 2016 at 05:40:17PM -0700, Stephen Boyd wrote:
> @@ -174,14 +219,37 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
> ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
>
> + return 0;
> +}
> +
> +static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> +{
> + int ret;
> +
> ulpi->dev.parent = dev;
> ulpi->dev.bus = &ulpi_bus;
> ulpi->dev.type = &ulpi_dev_type;
> dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
>
> + if (IS_ENABLED(CONFIG_OF)) {
I don't think you need to check that in this case.
> + ret = ulpi_of_register(ulpi);
> + if (ret)
> + return ret;
> + }
> +
> ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
ACPI_COMPANION_SET will overwrite the primary fwnode unconditionally,
so just to play it safe, do this before you call ulpi_of_register().
> - request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
> + ret = ulpi_read_id(ulpi);
> + /*
> + * Ignore failure in case of DT node because the device may
> + * not be powered up yet but we can still match by compatible
> + */
> + if (ret && !ulpi->dev.of_node)
> + return ret;
> +
> + if (of_device_request_module(&ulpi->dev))
> + request_module("ulpi:v%04xp%04x", ulpi->id.vendor,
> + ulpi->id.product);
I don't think this works in all cases. If of_device_request_module()
fails and we don't have the id.vendor/product set, we should not
register the device. It also looks a bit messy.
How about just using of_device_request_module() call as fallback in
ulpi_read_id() and moving also request_module() call there:
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 30ea770..667246c 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -205,14 +205,14 @@ static int ulpi_read_id(struct ulpi *ulpi)
/* Test the interface */
ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa);
if (ret < 0)
- return ret;
+ goto err;
ret = ulpi_read(ulpi, ULPI_SCRATCH);
if (ret < 0)
- return ret;
+ goto err;
if (ret != 0xaa)
- return -ENODEV;
+ goto err;
ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW);
ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8;
@@ -220,7 +220,11 @@ static int ulpi_read_id(struct ulpi *ulpi)
ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
+ request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
+
return 0;
+err:
+ return of_device_request_module(&ulpi->dev);
}
static int ulpi_register(struct device *dev, struct ulpi *ulpi)
@@ -232,25 +236,15 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
ulpi->dev.type = &ulpi_dev_type;
dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
- if (IS_ENABLED(CONFIG_OF)) {
- ret = ulpi_of_register(ulpi);
- if (ret)
- return ret;
- }
-
ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
- ret = ulpi_read_id(ulpi);
- /*
- * Ignore failure in case of DT node because the device may
- * not be powered up yet but we can still match by compatible
- */
- if (ret && !ulpi->dev.of_node)
+ ret = ulpi_of_register(ulpi);
+ if (ret)
return ret;
- if (of_device_request_module(&ulpi->dev))
- request_module("ulpi:v%04xp%04x", ulpi->id.vendor,
- ulpi->id.product);
+ ret = ulpi_read_id(ulpi);
+ if (ret)
+ return ret;
ret = device_register(&ulpi->dev);
if (ret)
Cheers,
--
heikki
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-03 03:20 +0200 |
| Subject | Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties |
| Message-ID | <sd7MK-6Zb-1@gated-at.bofh.it> |
| In reply to | #1475189 |
On Fri, Sep 2, 2016 at 7:09 AM, Heikki Krogerus
<heikki.krogerus@linux.intel.com> wrote:
> Hi,
>
> On Wed, Aug 31, 2016 at 05:40:17PM -0700, Stephen Boyd wrote:
>> @@ -174,14 +219,37 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
>> ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
>> ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
>>
>> + return 0;
>> +}
>> +
>> +static int ulpi_register(struct device *dev, struct ulpi *ulpi)
>> +{
>> + int ret;
>> +
>> ulpi->dev.parent = dev;
>> ulpi->dev.bus = &ulpi_bus;
>> ulpi->dev.type = &ulpi_dev_type;
>> dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
>>
>> + if (IS_ENABLED(CONFIG_OF)) {
>
> I don't think you need to check that in this case.
>
>> + ret = ulpi_of_register(ulpi);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
>
> ACPI_COMPANION_SET will overwrite the primary fwnode unconditionally,
> so just to play it safe, do this before you call ulpi_of_register().
Ok.
>
>> - request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
>> + ret = ulpi_read_id(ulpi);
>> + /*
>> + * Ignore failure in case of DT node because the device may
>> + * not be powered up yet but we can still match by compatible
>> + */
>> + if (ret && !ulpi->dev.of_node)
>> + return ret;
>> +
>> + if (of_device_request_module(&ulpi->dev))
>> + request_module("ulpi:v%04xp%04x", ulpi->id.vendor,
>> + ulpi->id.product);
>
> I don't think this works in all cases. If of_device_request_module()
> fails and we don't have the id.vendor/product set, we should not
> register the device. It also looks a bit messy.
>
> How about just using of_device_request_module() call as fallback in
> ulpi_read_id() and moving also request_module() call there:
Sure I'll fold it in and test. Should we "goto err" if we can't read
the scratch register though? I would think that's a "real" failure and
we shouldn't try to support DT in that case.
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 20/22] usb: chipidea: msm: Be silent on probe defer errors |
| Message-ID | <scomC-15L-35@gated-at.bofh.it> |
| In reply to | #1473983 |
If something fails in ci_hdrc_add_device() due to probe defer, we
shouldn't print an error message. Be silent in this case as we'll
try probe again later.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 316044dba0ac..f1ede7909f54 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -262,8 +262,9 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource,
pdev->num_resources, &ci->pdata);
if (IS_ERR(plat_ci)) {
- dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
ret = PTR_ERR(plat_ci);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
goto err_mux;
}
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 15/22] usb: chipidea: msm: Mux over secondary phy at the right time |
| Message-ID | <scomC-15L-25@gated-at.bofh.it> |
| In reply to | #1473983 |
We need to pick the correct phy at runtime based on how the SoC
has been wired onto the board. If the secondary phy is used, take
it out of reset and mux over to it by writing into the TCSR
register. Make sure to do this on reset too, because this
register is reset to the default value (primary phy) after the
RESET bit is set in USBCMD.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 62 ++++++++++++++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 7e870a253f55..4b0aadc2be2f 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -8,29 +8,44 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/io.h>
#include "ci.h"
#define HS_PHY_AHB_MODE 0x0098
+/* Vendor base starts at 0x200 beyond CI base */
+#define HS_PHY_SEC_CTRL 0x0078
+#define HS_PHY_DIG_CLAMP_N BIT(16)
+
struct ci_hdrc_msm {
struct platform_device *ci;
struct clk *core_clk;
struct clk *iface_clk;
struct clk *fs_clk;
+ bool secondary_phy;
+ void __iomem *base;
};
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
- struct device *dev = ci->gadget.dev.parent;
+ struct device *dev = ci->dev->parent;
+ struct ci_hdrc_msm *msm_ci = dev_get_drvdata(dev);
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
+ if (msm_ci->secondary_phy) {
+ u32 val = readl_relaxed(msm_ci->base + HS_PHY_SEC_CTRL);
+ val |= HS_PHY_DIG_CLAMP_N;
+ writel_relaxed(val, msm_ci->base + HS_PHY_SEC_CTRL);
+ }
+
/* use AHB transactor, allow posted data writes */
hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
usb_phy_init(ci->usb_phy);
@@ -59,6 +74,39 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
.notify_event = ci_hdrc_msm_notify_event,
};
+static int ci_hdrc_msm_mux_phy(struct ci_hdrc_msm *ci,
+ struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct device *dev = &pdev->dev;
+ struct of_phandle_args args;
+ u32 val;
+ int ret;
+
+ ret = of_parse_phandle_with_fixed_args(dev->of_node, "phy-select", 2, 0,
+ &args);
+ if (ret)
+ return 0;
+
+ regmap = syscon_node_to_regmap(args.np);
+ of_node_put(args.np);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = regmap_write(regmap, args.args[0], args.args[1]);
+ if (ret)
+ return ret;
+
+ ci->secondary_phy = !!args.args[1];
+ if (ci->secondary_phy) {
+ val = readl_relaxed(ci->base + HS_PHY_SEC_CTRL);
+ val |= HS_PHY_DIG_CLAMP_N;
+ writel_relaxed(val, ci->base + HS_PHY_SEC_CTRL);
+ }
+
+ return 0;
+}
+
static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
struct ci_hdrc_msm *ci;
@@ -66,6 +114,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
struct usb_phy *phy;
struct clk *clk;
struct reset_control *reset;
+ struct resource *res;
int ret;
dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
@@ -105,6 +154,11 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
ci->fs_clk = NULL;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ ci->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!ci->base)
+ return -ENOMEM;
+
ret = clk_prepare_enable(ci->fs_clk);
if (ret)
return ret;
@@ -123,6 +177,10 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
if (ret)
goto err_iface;
+ ret = ci_hdrc_msm_mux_phy(ci, pdev);
+ if (ret)
+ goto err_mux;
+
plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci_hdrc_msm_platdata);
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 13/22] usb: chipidea: msm: Use hw_write_id_reg() instead of writel |
| Message-ID | <scomB-15L-19@gated-at.bofh.it> |
| In reply to | #1473983 |
The MSM_USB_BASE macro trick is not very clear, and we're using
it for only one register write so let's just move to using
hw_write_id_reg() and passing the ci pointer instead. That
clearly shows what offset we're using and avoids needing to
include the msm_hsusb_hw.h file when we're going to delete that
file soon.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 719b20caf88e..b282a717bf8c 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -8,14 +8,12 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/usb/msm_hsusb_hw.h>
-#include <linux/usb/ulpi.h>
#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
#include "ci.h"
-#define MSM_USB_BASE (ci->hw_bank.abs)
+#define HS_PHY_AHB_MODE 0x0098
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
@@ -25,7 +23,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
/* use AHB transactor, allow posted data writes */
- writel(0x8, USB_AHBMODE);
+ hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
usb_phy_init(ci->usb_phy);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 19/22] usb: chipidea: msm: Handle phy power states |
| Message-ID | <scomC-15L-31@gated-at.bofh.it> |
| In reply to | #1473983 |
The ULPI phy on qcom platforms needs to be initialized and
powered on after a USB reset and before we toggle the run/stop
bit. Otherwise, the phy locks up and doesn't work properly. Hook
the phy initialization into the RESET event and the phy power off
into the STOPPED event.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 40 +++++++++++++++++++-------------------
drivers/usb/chipidea/core.c | 8 ++++++--
drivers/usb/chipidea/host.c | 8 ++++++--
include/linux/usb/chipidea.h | 2 +-
4 files changed, 33 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index fe96df7b530c..316044dba0ac 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -80,20 +80,33 @@ static const struct reset_control_ops ci_hdrc_msm_reset_ops = {
.reset = ci_hdrc_msm_por_reset,
};
-static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
+static int ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->dev->parent;
struct ci_hdrc_msm *msm_ci = dev_get_drvdata(dev);
+ int ret;
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
+
+ hw_phymode_configure(ci);
if (msm_ci->secondary_phy) {
u32 val = readl_relaxed(msm_ci->base + HS_PHY_SEC_CTRL);
val |= HS_PHY_DIG_CLAMP_N;
writel_relaxed(val, msm_ci->base + HS_PHY_SEC_CTRL);
}
+ ret = phy_init(ci->phy);
+ if (ret)
+ return ret;
+
+ ret = phy_power_on(ci->phy);
+ if (ret) {
+ phy_exit(ci->phy);
+ return ret;
+ }
+
/* use AHB transactor, allow posted data writes */
hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
@@ -113,21 +126,18 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
HSPHY_SESS_VLD_CTRL);
}
-
- usb_phy_init(ci->usb_phy);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
- /*
- * Put the phy in non-driving mode. Otherwise host
- * may not detect soft-disconnection.
- */
- usb_phy_notify_disconnect(ci->usb_phy, USB_SPEED_UNKNOWN);
+ phy_power_off(ci->phy);
+ phy_exit(ci->phy);
break;
default:
dev_dbg(dev, "unknown ci_hdrc event\n");
break;
}
+
+ return 0;
}
static int ci_hdrc_msm_mux_phy(struct ci_hdrc_msm *ci,
@@ -167,7 +177,6 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
struct ci_hdrc_msm *ci;
struct platform_device *plat_ci;
- struct usb_phy *phy;
struct clk *clk;
struct reset_control *reset;
struct resource *res;
@@ -181,21 +190,12 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
return -ENOMEM;
platform_set_drvdata(pdev, ci);
- /*
- * OTG(PHY) driver takes care of PHY initialization, clock management,
- * powering up VBUS, mapping of registers address space and power
- * management.
- */
- phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
- if (IS_ERR(phy))
- return PTR_ERR(phy);
-
ci->pdata.name = "ci_hdrc_msm";
ci->pdata.capoffset = DEF_CAPOFFSET;
ci->pdata.flags = CI_HDRC_REGS_SHARED | CI_HDRC_DISABLE_STREAMING |
- CI_HDRC_OVERRIDE_AHB_BURST;
+ CI_HDRC_OVERRIDE_AHB_BURST |
+ CI_HDRC_OVERRIDE_PHY_CONTROL;
ci->pdata.notify_event = ci_hdrc_msm_notify_event;
- ci->pdata.usb_phy = phy;
reset = devm_reset_control_get(&pdev->dev, "core");
if (IS_ERR(reset))
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index f3b8d7488648..82cf39a927c6 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -327,6 +327,7 @@ void hw_phymode_configure(struct ci_hdrc *ci)
hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
}
}
+EXPORT_SYMBOL_GPL(hw_phymode_configure);
/**
* _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
@@ -503,9 +504,12 @@ int hw_device_reset(struct ci_hdrc *ci)
return ret;
}
- if (ci->platdata->notify_event)
- ci->platdata->notify_event(ci,
+ if (ci->platdata->notify_event) {
+ ret = ci->platdata->notify_event(ci,
CI_HDRC_CONTROLLER_RESET_EVENT);
+ if (ret)
+ return ret;
+ }
/* USBMODE should be configured step by step */
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index a1d8551ca79d..844be1d02d38 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -87,8 +87,12 @@ static int ehci_ci_reset(struct usb_hcd *hcd)
if (ret)
return ret;
- if (ci->platdata->notify_event)
- ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_RESET_EVENT);
+ if (ci->platdata->notify_event) {
+ ret = ci->platdata->notify_event(ci,
+ CI_HDRC_CONTROLLER_RESET_EVENT);
+ if (ret)
+ return ret;
+ }
ci_platform_configure(ci);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d07b162073f7..5e76552c81e9 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -61,7 +61,7 @@ struct ci_hdrc_platform_data {
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
- void (*notify_event) (struct ci_hdrc *ci, unsigned event);
+ int (*notify_event) (struct ci_hdrc *ci, unsigned event);
struct regulator *reg_vbus;
struct usb_otg_caps ci_otg_caps;
bool tpl_support;
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 22/22] phy: Add support for Qualcomm's USB HS phy |
| Message-ID | <scomC-15L-29@gated-at.bofh.it> |
| In reply to | #1473983 |
The high-speed phy on qcom SoCs is controlled via the ULPI
viewport.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
.../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 83 ++++++
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-qcom-usb-hs.c | 288 +++++++++++++++++++++
4 files changed, 380 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
create mode 100644 drivers/phy/phy-qcom-usb-hs.c
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
new file mode 100644
index 000000000000..d7eacd63d06b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
@@ -0,0 +1,83 @@
+Qualcomm's USB HS PHY
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
+ following:
+
+ "qcom,usb-hs-phy-apq8064"
+ "qcom,usb-hs-phy-msm8916"
+ "qcom,usb-hs-phy-msm8974"
+
+- #phy-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should contain 0
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Should contain clock specifier for the reference and sleep
+ clocks
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain "ref" and "sleep" for the reference and sleep
+ clocks respectively
+
+- resets:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Should contain the phy and POR resets
+
+- reset-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain "phy" and "por" for the phy and POR resets
+ respectively
+
+- v3p3-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 3.3V supply
+
+- v1p8-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V supply
+
+- extcon:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: Should contain the vbus and ID extcons in the first and second
+ cells respectively
+
+- qcom,init-seq:
+ Usage: optional
+ Value type: <u8 array>
+ Definition: Should contain a sequence of ULPI register and address pairs to
+ program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
+ to Device Mode Eye Diagram test.
+
+EXAMPLE
+
+otg: usb-controller {
+ ulpi {
+ phy {
+ compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+ reset-names = "phy", "por";
+ v3p3-supply = <&pm8941_l24>;
+ v1p8-supply = <&pm8941_l6>;
+ extcon = <&smbb>, <&usb_id>;
+ qcom,init-seq = /bits/ 8 <0x81 0x63>;
+ };
+ };
+};
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 830c443eeabf..ee0ec021a98c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -417,6 +417,14 @@ config PHY_QCOM_UFS
help
Support for UFS PHY on QCOM chipsets.
+config PHY_QCOM_USB_HS
+ tristate "Qualcomm USB HS PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for the USB high-speed ULPI compliant phy on Qualcomm
+ chipsets.
+
config PHY_QCOM_USB_HSIC
tristate "Qualcomm USB HSIC ULPI PHY module"
depends on USB_ULPI_BUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 5422f543d17d..31c84faa07fa 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
+obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
diff --git a/drivers/phy/phy-qcom-usb-hs.c b/drivers/phy/phy-qcom-usb-hs.c
new file mode 100644
index 000000000000..ff3917629f2d
--- /dev/null
+++ b/drivers/phy/phy-qcom-usb-hs.c
@@ -0,0 +1,288 @@
+/**
+ * Copyright (C) 2016 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+#include <linux/extcon.h>
+#include <linux/notifier.h>
+#include <linux/usb/of.h>
+
+#include "ulpi_phy.h"
+
+#define ULPI_PWR_CLK_MNG_REG 0x88
+# define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
+
+#define ULPI_MISC_A 0x96
+# define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
+# define ULPI_MISC_A_VBUSVLDEXT BIT(0)
+
+
+struct ulpi_seq {
+ u8 addr;
+ u8 val;
+};
+
+struct qcom_usb_hs_phy {
+ struct ulpi *ulpi;
+ struct phy *phy;
+ struct clk *ref_clk;
+ struct clk *sleep_clk;
+ struct regulator *v1p8;
+ struct regulator *v3p3;
+ struct reset_control *reset;
+ struct ulpi_seq *init_seq;
+ struct notifier_block vbus_notify;
+ struct extcon_dev *vbus_edev;
+ struct extcon_dev *id_edev;
+ enum usb_dr_mode dr_mode;
+};
+
+static int
+qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct qcom_usb_hs_phy *uphy;
+ int is_host;
+ u8 addr;
+
+ uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify);
+ is_host = extcon_get_cable_state_(uphy->id_edev, EXTCON_USB_HOST);
+ if (is_host < 0)
+ is_host = 0; /* No id event means always a peripheral */
+
+ if (event && !is_host)
+ addr = ULPI_SET(ULPI_MISC_A);
+ else
+ addr = ULPI_CLR(ULPI_MISC_A);
+
+ return ulpi_write(uphy->ulpi, addr,
+ ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT);
+}
+
+static int qcom_usb_hs_phy_power_on(struct phy *phy)
+{
+ struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+ struct ulpi *ulpi = uphy->ulpi;
+ const struct ulpi_seq *seq;
+ int ret, state;
+
+ ret = clk_prepare_enable(uphy->ref_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(uphy->sleep_clk);
+ if (ret)
+ goto err_sleep;
+
+ ret = regulator_set_voltage(uphy->v1p8, 1800000, 1800000);
+ if (ret)
+ goto err_1p8;
+ ret = regulator_set_load(uphy->v1p8, 50000);
+ if (ret < 0)
+ goto err_1p8;
+
+ ret = regulator_enable(uphy->v1p8);
+ if (ret)
+ goto err_1p8;
+
+ ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000,
+ 3300000);
+ if (ret)
+ goto err_3p3;
+
+ ret = regulator_set_load(uphy->v3p3, 50000);
+ if (ret < 0)
+ goto err_3p3;
+
+ ret = regulator_enable(uphy->v3p3);
+ if (ret)
+ goto err_3p3;
+
+ for (seq = uphy->init_seq; seq->addr; seq++) {
+ ret = ulpi_write(ulpi, seq->addr, seq->val);
+ if (ret)
+ goto err_ulpi;
+ }
+
+ if (uphy->reset) {
+ ret = reset_control_reset(uphy->reset);
+ if (ret)
+ goto err_ulpi;
+ }
+
+ if (uphy->vbus_edev) {
+ ulpi_write(ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG),
+ ULPI_PWR_OTG_COMP_DISABLE);
+ state = extcon_get_cable_state_(uphy->vbus_edev, EXTCON_USB);
+ /* setup initial state */
+ qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
+ uphy->vbus_edev);
+ ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
+ if (ret)
+ return ret;
+ } else {
+ u8 val;
+
+ switch (uphy->dr_mode) {
+ case USB_DR_MODE_OTG:
+ val = ULPI_INT_IDGRD;
+ case USB_DR_MODE_PERIPHERAL:
+ val |= ULPI_INT_SESS_VALID;
+ break;
+ default:
+ val = 0;
+ }
+
+ ret = ulpi_write(ulpi, ULPI_USB_INT_EN_RISE, val);
+ if (ret)
+ goto err_ulpi;
+ ret = ulpi_write(ulpi, ULPI_USB_INT_EN_FALL, val);
+ if (ret)
+ goto err_ulpi;
+ }
+
+ return 0;
+err_ulpi:
+ regulator_disable(uphy->v3p3);
+err_3p3:
+ regulator_disable(uphy->v1p8);
+err_1p8:
+ clk_disable_unprepare(uphy->sleep_clk);
+err_sleep:
+ clk_disable_unprepare(uphy->ref_clk);
+ return ret;
+}
+
+static int qcom_usb_hs_phy_power_off(struct phy *phy)
+{
+ int ret;
+ struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+
+ if (uphy->vbus_edev) {
+ ret = extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
+ if (ret)
+ return ret;
+ }
+
+ regulator_disable(uphy->v3p3);
+ regulator_disable(uphy->v1p8);
+ clk_disable_unprepare(uphy->sleep_clk);
+ clk_disable_unprepare(uphy->ref_clk);
+
+ return 0;
+}
+
+static const struct phy_ops qcom_usb_hs_phy_ops = {
+ .power_on = qcom_usb_hs_phy_power_on,
+ .power_off = qcom_usb_hs_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int qcom_usb_hs_phy_probe(struct ulpi *ulpi)
+{
+ struct qcom_usb_hs_phy *uphy;
+ struct phy_provider *p;
+ struct clk *clk;
+ struct regulator *reg;
+ struct reset_control *reset;
+ int size;
+ int ret;
+
+ uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL);
+ if (!uphy)
+ return -ENOMEM;
+ ulpi_set_drvdata(ulpi, uphy);
+ uphy->ulpi = ulpi;
+ uphy->dr_mode = of_usb_get_dr_mode_by_phy(ulpi->dev.of_node, -1);
+
+ size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq");
+ if (size < 0)
+ size = 0;
+ uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1,
+ sizeof(*uphy->init_seq), GFP_KERNEL);
+ if (!uphy->init_seq)
+ return -ENOMEM;
+ ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq",
+ (u8 *)uphy->init_seq, size);
+ if (ret && size)
+ return ret;
+ /* NUL terminate */
+ uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0;
+
+ uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8");
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3");
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por");
+ if (IS_ERR(reset)) {
+ if (PTR_ERR(reset) == -EPROBE_DEFER)
+ return PTR_ERR(reset);
+ uphy->reset = NULL;
+ }
+
+ uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node,
+ &qcom_usb_hs_phy_ops);
+ if (IS_ERR(uphy->phy))
+ return PTR_ERR(uphy->phy);
+
+ uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0);
+ if (IS_ERR(uphy->vbus_edev)) {
+ if (PTR_ERR(uphy->vbus_edev) != -ENODEV)
+ return PTR_ERR(uphy->vbus_edev);
+ uphy->vbus_edev = NULL;
+ }
+
+ uphy->id_edev = extcon_get_edev_by_phandle(&ulpi->dev, 1);
+ if (IS_ERR(uphy->id_edev)) {
+ if (PTR_ERR(uphy->id_edev) != -ENODEV)
+ return PTR_ERR(uphy->id_edev);
+ uphy->id_edev = NULL;
+ }
+
+ uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier;
+ phy_set_drvdata(uphy->phy, uphy);
+
+ p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(p);
+}
+
+static const struct of_device_id qcom_usb_hs_phy_match[] = {
+ { .compatible = "qcom,usb-hs-phy", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match);
+
+static struct ulpi_driver qcom_usb_hs_phy_driver = {
+ .probe = qcom_usb_hs_phy_probe,
+ .driver = {
+ .name = "qcom_usb_hs_phy",
+ .of_match_table = qcom_usb_hs_phy_match,
+ },
+};
+module_ulpi_driver(qcom_usb_hs_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm USB HS phy");
+MODULE_LICENSE("GPL v2");
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 05/22] usb: chipidea: Handle extcon events properly |
| Message-ID | <scomC-15L-33@gated-at.bofh.it> |
| In reply to | #1473983 |
We're currently emulating the vbus and id interrupts in the OTGSC
read API, but we also need to make sure that if we're handling
the events with extcon that we don't enable the interrupts for
those events in the hardware. Therefore, properly emulate this
register if we're using extcon, but don't enable the interrupts.
This allows me to get my cable connect/disconnect working
properly without getting spurious interrupts on my device that
uses an extcon for these two events.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/otg.c | 46 +++++++++++++++++++++++++++++++++++++++-----
include/linux/usb/chipidea.h | 2 ++
2 files changed, 43 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index a829607c3e4d..0cf149edddd8 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -44,12 +44,15 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
else
val &= ~OTGSC_BSVIS;
- cable->changed = false;
-
if (cable->state)
val |= OTGSC_BSV;
else
val &= ~OTGSC_BSV;
+
+ if (cable->enabled)
+ val |= OTGSC_BSVIE;
+ else
+ val &= ~OTGSC_BSVIE;
}
cable = &ci->platdata->id_extcon;
@@ -59,15 +62,18 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
else
val &= ~OTGSC_IDIS;
- cable->changed = false;
-
if (cable->state)
val |= OTGSC_ID;
else
val &= ~OTGSC_ID;
+
+ if (cable->enabled)
+ val |= OTGSC_IDIE;
+ else
+ val &= ~OTGSC_IDIE;
}
- return val;
+ return val & mask;
}
/**
@@ -77,6 +83,36 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
*/
void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
{
+ struct ci_hdrc_cable *cable;
+
+ cable = &ci->platdata->vbus_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (data & mask & OTGSC_BSVIS)
+ cable->changed = false;
+
+ /* Don't enable vbus interrupt if using external notifier */
+ if (data & mask & OTGSC_BSVIE) {
+ cable->enabled = true;
+ data &= ~OTGSC_BSVIE;
+ } else if (mask & OTGSC_BSVIE) {
+ cable->enabled = false;
+ }
+ }
+
+ cable = &ci->platdata->id_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (data & mask & OTGSC_IDIS)
+ cable->changed = false;
+
+ /* Don't enable id interrupt if using external notifier */
+ if (data & mask & OTGSC_IDIE) {
+ cable->enabled = true;
+ data &= ~OTGSC_IDIE;
+ } else if (mask & OTGSC_IDIE) {
+ cable->enabled = false;
+ }
+ }
+
hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 5dd75fa47dd8..f9be467d6695 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -14,6 +14,7 @@ struct ci_hdrc;
* struct ci_hdrc_cable - structure for external connector cable state tracking
* @state: current state of the line
* @changed: set to true when extcon event happen
+ * @enabled: set to true if we've enabled the vbus or id interrupt
* @edev: device which generate events
* @ci: driver state of the chipidea device
* @nb: hold event notification callback
@@ -22,6 +23,7 @@ struct ci_hdrc;
struct ci_hdrc_cable {
bool state;
bool changed;
+ bool enabled;
struct extcon_dev *edev;
struct ci_hdrc *ci;
struct notifier_block nb;
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 01/22] of: device: Support loading a module with OF based modalias |
| Message-ID | <scomC-15L-37@gated-at.bofh.it> |
| In reply to | #1473983 |
In the case of ULPI devices, we want to be able to load the
driver before registering the device so that we don't get stuck
in a loop waiting for the phy module to appear and failing usb
controller probe. Currently we request the ulpi module via the
ulpi ids, but in the DT case we might need to request it with the
OF based modalias instead. Add a common function that allows
anyone to request a module with the OF based modalias.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/of/device.c | 23 +++++++++++++++++++++++
include/linux/of_device.h | 6 ++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/of/device.c b/drivers/of/device.c
index fd5cfad7c403..8a22a253a830 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -226,6 +226,29 @@ ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
return tsize;
}
+int of_device_request_module(struct device *dev)
+{
+ char *str;
+ ssize_t size;
+ int ret;
+
+ size = of_device_get_modalias(dev, NULL, 0);
+ if (size < 0)
+ return size;
+
+ str = kmalloc(size + 1, GFP_KERNEL);
+ if (!str)
+ return -ENOMEM;
+
+ of_device_get_modalias(dev, str, size);
+ str[size] = '\0';
+ ret = request_module(str);
+ kfree(str);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_device_request_module);
+
/**
* of_device_uevent - Display OF related uevent information
*/
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index cc7dd687a89d..e9afbcc8de12 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -37,6 +37,7 @@ extern const void *of_device_get_match_data(const struct device *dev);
extern ssize_t of_device_get_modalias(struct device *dev,
char *str, ssize_t len);
+extern int of_device_request_module(struct device *dev);
extern void of_device_uevent(struct device *dev, struct kobj_uevent_env *env);
extern int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env);
@@ -78,6 +79,11 @@ static inline int of_device_get_modalias(struct device *dev,
return -ENODEV;
}
+static inline int of_device_request_module(struct device *dev)
+{
+ return -ENODEV;
+}
+
static inline int of_device_uevent_modalias(struct device *dev,
struct kobj_uevent_env *env)
{
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 02/22] of: device: Export of_device_{get_modalias,uvent_modalias} to modules |
| Message-ID | <scomC-15L-39@gated-at.bofh.it> |
| In reply to | #1473983 |
The ULPI bus can be built as a module, and it will soon be
calling these functions when it supports probing devices from DT.
Export them so they can be used by the ULPI module.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.or
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/of/device.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 8a22a253a830..6719ab35b62e 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -225,6 +225,7 @@ ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
return tsize;
}
+EXPORT_SYMBOL_GPL(of_device_get_modalias);
int of_device_request_module(struct device *dev)
{
@@ -290,6 +291,7 @@ void of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
}
mutex_unlock(&of_mutex);
}
+EXPORT_SYMBOL_GPL(of_device_uevent_modalias);
int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env)
{
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Date | 2016-09-01 02:50 +0200 |
| Subject | [PATCH v3 14/22] usb: chipidea: msm: Add proper clk and reset support |
| Message-ID | <scomC-15L-43@gated-at.bofh.it> |
| In reply to | #1473983 |
The msm chipidea controller uses two main clks, an AHB clk to
read/write the MMIO registers and a core clk called the system
clk that drives the controller itself. Add support for these clks
as they're required in all designs.
Also add support for an optional third clk that we need to turn
on to reset the controller and wrapper logic and other
"housekeeping" things. This clk was removed in later revisions of
the hardware because the reset methodology no longer required
clks to be enabled to propagate resets.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 72 +++++++++++++++++++++++++++++++++++---
1 file changed, 68 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index b282a717bf8c..7e870a253f55 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -10,11 +10,20 @@
#include <linux/pm_runtime.h>
#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
#include "ci.h"
#define HS_PHY_AHB_MODE 0x0098
+struct ci_hdrc_msm {
+ struct platform_device *ci;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *fs_clk;
+};
+
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->gadget.dev.parent;
@@ -52,11 +61,20 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
+ struct ci_hdrc_msm *ci;
struct platform_device *plat_ci;
struct usb_phy *phy;
+ struct clk *clk;
+ struct reset_control *reset;
+ int ret;
dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
+ ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
+ if (!ci)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, ci);
+
/*
* OTG(PHY) driver takes care of PHY initialization, clock management,
* powering up VBUS, mapping of registers address space and power
@@ -68,29 +86,75 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
ci_hdrc_msm_platdata.usb_phy = phy;
+ reset = devm_reset_control_get(&pdev->dev, "core");
+ if (IS_ERR(reset))
+ return PTR_ERR(reset);
+
+ ci->core_clk = clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ci->iface_clk = clk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ci->fs_clk = clk = devm_clk_get(&pdev->dev, "fs");
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ ci->fs_clk = NULL;
+ }
+
+ ret = clk_prepare_enable(ci->fs_clk);
+ if (ret)
+ return ret;
+
+ reset_control_assert(reset);
+ usleep_range(10000, 12000);
+ reset_control_deassert(reset);
+
+ clk_disable_unprepare(ci->fs_clk);
+
+ ret = clk_prepare_enable(ci->core_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(ci->iface_clk);
+ if (ret)
+ goto err_iface;
+
plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci_hdrc_msm_platdata);
if (IS_ERR(plat_ci)) {
dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
- return PTR_ERR(plat_ci);
+ ret = PTR_ERR(plat_ci);
+ goto err_mux;
}
- platform_set_drvdata(pdev, plat_ci);
+ ci->ci = plat_ci;
pm_runtime_set_active(&pdev->dev);
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
+
+err_mux:
+ clk_disable_unprepare(ci->iface_clk);
+err_iface:
+ clk_disable_unprepare(ci->core_clk);
+ return ret;
}
static int ci_hdrc_msm_remove(struct platform_device *pdev)
{
- struct platform_device *plat_ci = platform_get_drvdata(pdev);
+ struct ci_hdrc_msm *ci = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
- ci_hdrc_remove_device(plat_ci);
+ ci_hdrc_remove_device(ci->ci);
+ clk_disable_unprepare(ci->iface_clk);
+ clk_disable_unprepare(ci->core_clk);
return 0;
}
--
2.9.0.rc2.8.ga28705d
[toc] | [prev] | [next] | [standalone]
Page 1 of 2 [1] 2 Next page →
Back to top | Article view | linux.kernel
csiph-web