Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1473322 > unrolled thread

[PATCH v2] drm: drm_probe_helper: Fix output_poll_work scheduling

Back to article view | Back to linux.kernel

Contents

  [PATCH v2] drm: drm_probe_helper: Fix output_poll_work scheduling Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-08-31 13:10 +0200
    Re: [PATCH v2] drm: drm_probe_helper: Fix output_poll_work scheduling Daniel Vetter <daniel@ffwll.ch> - 2016-08-31 13:30 +0200

#1473322 — [PATCH v2] drm: drm_probe_helper: Fix output_poll_work scheduling

drm_kms_helper_poll_enable_locked() should check if we have delayed event
pending and if we have, schedule the work to run without delay.

Currently the output_poll_work is only scheduled if any of the connectors
have DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT with
DRM_OUTPUT_POLL_PERIOD delay. It does not matter if we have delayed event
already registered to be handled. The detection will be delayd by
DRM_OUTPUT_POLL_PERIOD in any case.
Furthermore if none of the connectors are marked as POLL_CONNECT or
POLL_DISCONNECT because all connectors are either POLL_HPD or they are
always connected: the output_poll_work will not run at all even if we
have delayed event marked.

When none of the connectors require polling, their initial status change
from unknown to connected/disconnected is not going to be handled until
the first kms application starts or if we have fb console enabled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

Changes since v1:
- dropped the last paragraph from the commit message.

Regards,
Peter

 drivers/gpu/drm/drm_probe_helper.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index a0df377d7d1c..f6b64d7d3528 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -129,6 +129,7 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
 {
 	bool poll = false;
 	struct drm_connector *connector;
+	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;

 	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));

@@ -141,8 +142,13 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
 			poll = true;
 	}

+	if (dev->mode_config.delayed_event) {
+		poll = true;
+		delay = 0;
+	}
+
 	if (poll)
-		schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
+		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked);

--
2.9.3

[toc] | [next] | [standalone]

#1473338

On Wed, Aug 31, 2016 at 02:09:05PM +0300, Peter Ujfalusi wrote:
> drm_kms_helper_poll_enable_locked() should check if we have delayed event
> pending and if we have, schedule the work to run without delay.
> 
> Currently the output_poll_work is only scheduled if any of the connectors
> have DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT with
> DRM_OUTPUT_POLL_PERIOD delay. It does not matter if we have delayed event
> already registered to be handled. The detection will be delayd by
> DRM_OUTPUT_POLL_PERIOD in any case.
> Furthermore if none of the connectors are marked as POLL_CONNECT or
> POLL_DISCONNECT because all connectors are either POLL_HPD or they are
> always connected: the output_poll_work will not run at all even if we
> have delayed event marked.
> 
> When none of the connectors require polling, their initial status change
> from unknown to connected/disconnected is not going to be handled until
> the first kms application starts or if we have fb console enabled.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> Hi,
> 
> Changes since v1:
> - dropped the last paragraph from the commit message.

I added a few more words to the commit message to explain when exactly
this is a problem and applied your patch to drm-misc.

Thanks, Daniel
> 
> Regards,
> Peter
> 
>  drivers/gpu/drm/drm_probe_helper.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index a0df377d7d1c..f6b64d7d3528 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -129,6 +129,7 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
>  {
>  	bool poll = false;
>  	struct drm_connector *connector;
> +	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
> 
>  	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
> 
> @@ -141,8 +142,13 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
>  			poll = true;
>  	}
> 
> +	if (dev->mode_config.delayed_event) {
> +		poll = true;
> +		delay = 0;
> +	}
> +
>  	if (poll)
> -		schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
> +		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
>  }
>  EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked);
> 
> --
> 2.9.3
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web