Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1470794 > unrolled thread

[PATCH v8 00/18] Add support for FDMA DMA controller and slim core rproc found on STi chipsets

Back to article view | Back to linux.kernel

Contents

  [PATCH v8 00/18] Add support for FDMA DMA controller and slim core rproc found on STi chipsets Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:00 +0200
    [PATCH v8 07/18] MAINTAINERS: Add FDMA driver files to STi section. Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:00 +0200
    [PATCH v8 12/18] ARM: DT: STiH407: Add spdif_out pinctrl config Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:00 +0200
    [PATCH v8 17/18] drm/virtio: kconfig: Fix recursive dependency. Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:00 +0200
      Re: [PATCH v8 17/18] drm/virtio: kconfig: Fix recursive dependency. Lee Jones <lee.jones@linaro.org> - 2016-08-30 12:00 +0200
    [PATCH v8 03/18] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200
    [PATCH v8 02/18] MAINTAINERS: Add st slim core rproc driver to STi section. Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200
    [PATCH v8 08/18] ARM: multi_v7_defconfig: Enable STi FDMA driver Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200
    [PATCH v8 10/18] ARM: DT: STiH407: Add i2s_out pinctrl configuration Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200
    [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200
      Re: [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA  engine driver support Vinod Koul <vinod.koul@intel.com> - 2016-08-30 18:30 +0200
        Re: [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA  engine driver support Peter Griffin <peter.griffin@linaro.org> - 2016-09-01 12:10 +0200
    [PATCH v8 06/18] ARM: STi: DT: STiH407: Add FDMA driver dt nodes. Peter Griffin <peter.griffin@linaro.org> - 2016-08-26 17:10 +0200

#1470794 — [PATCH v8 00/18] Add support for FDMA DMA controller and slim core rproc found on STi chipsets

Hi Vinod, Bjorn, Patrice,

This patchset adds support for the Flexible Direct Memory Access (FDMA) core
found on STi chipsets from STMicroelectronics. The FDMA is a slim core CPU
with a dedicated firmware. It is a general purpose DMA controller supporting
16 independent channels and data can be moved from memory to memory or between
memory and paced latency critical real time targets.

After quite a few review rounds, I'm hoping this series can get taken for v4.9.

After some discussion with the DT maintainers I've removed the firmware
name from DT, and now generate the name based on the compatible string.

I've also dropped the dma xbar support for the moment, as I believe it should be
re-worked based on some of the xbar API's that TI recently added.

V3 also included some updates to the ASoC st,sti-asoc-card.txt DT documentation
to make the doc align with the driver code. These patches have already been applied
and are now dropped from this series. Other changes included enabling the ASoC drivers
in multi_v7 defconfig and adding DT patches for Patrices STi DT tree to enable ASoC
on STiH407/10 based platforms using the fdma driver.

v4 includes a new slim core rproc driver for loading the slim elf firmware. This
enables us to use the generic rproc elf loading code. This has deliberately not
been implemented as a platform_driver, to avoid having to have double mappings of
I/O memory from two device drivers, and also to ensure that the DT node reflects
the actual hardware rather than Linux subsystems. The slim core is the basis
for various pieces of IP in STi chipsets and the intention is that other drivers
(e.g. demux) can also be migrated over to using the slim rproc for their
elf firmware loading and start/stop control.

v5 includes various updates from Bjorn related to the slim rproc implementation.
It also includes a patch to make rsc_table optional in remoteproc_core and various
other cleanups and review feedback from Vinod to do with the actual fdma
implementation. It also fixes a regression introduced in v4 when all drivers are
built-in spotted by Aranud.

v6 goes back to having a dummy rsc_table and fixes some kbuild warnings. However
a change is still required in rproc core when all drivers are built-in as the initial
async firmware resource table parsing can fail when built-in, which causes subsequent calls
to rproc_boot() to also fail. V6 changes this behaviour to retry rproc_fw_config_virtio()
from rproc_boot(), in cases where it previously failed, as at this point we know the
irmwaref has been successfully obtained.

v7 removes all remoteproc core changes required to get -EPROBE_DEFER working properly
when firmware resides on a rootfs and compiling as built-in. The fdma driver now relies on
the firmware being available in the initramfs when building fdma as built-in. This has
been tested and works well. If remoteproc subsystem implements a new mechanism for
firmware on late mounted root filesystems, we can migrate this driver over to use it
at that point.

v8 actions some review feedback from Bjorn to the slim rproc driver, and also includes
a patch which fixes a recursive Kconfig error which is triggered when st_fdma selects
slim_rproc driver. The series has also been rebased on v4.8-rc3.

regards,

Peter.

Changes since v7:
 - Rebase on v4.8-rc3 (Peter)
 - Double check that len is <= mem[i].size (Bjorn)
 - Remove if (!fw) checks (Bjorn)
 - Omit reference from fw_ops struct (Bjorn)
 - Call rproc_del() before rproc_put() (Bjorn)
 - Fix some odd line breaks (Bjorn)
 - Rename SLIM_* and slim_* with st prefix (Bjorn)

Changes since v6:
 - Fix recursive Kconfig warning (Patrice)
 - Fix various Intel zero day compiler warnings
 - Remove all changes related to late firmware load (now relies on initramfs) (Peter)

Changes since v5:
 - Remove optional rsc table and go back to dummy resource table (Bjorn)
 - Retry rproc_fw_config_virtio() from rproc_boot() if previously failed (Peter)
 - Fixup some kbuild warnings
 - rebase on v4.7-rc5
 - Remove some patches which were merged via ASoC tree

Changes since v4:
 - Make rsc table optional in remoteproc (Peter)
 - Various fixups to STi audio DT nodes (Arnaud)
 - Bulk rename of xp70 to slim (Peter)
 - Update my email to @linaro.org (Lee)
 - rebase on v4.7-rc2 (Peter)
 - Don't make ST_SLIM_REMOTEPROC user selectable (Bjorn)
 - -EPROBE_DEFER if rproc_boot fails when allocating DMA channel (Arnaud / Peter)
 - Drop some unnecessary headers (Vinod / Bjorn)
 - Change to writel now we have several mappings (Bjorn)
 - Remove io_res, rproc, and some unused structure fields / #define (Bjorn)
 - put clks in error path, also put clks before rproc_put() (Bjorn)
 - Make enum less generic (Bjorn)
 - Make slim_rproc_alloc() return a st_slim_rproc reference (Bjorn)
 - Alphabetical naming in Kconfig & Makefile (Vinod)
 - Add FDMA prefix to REQ_CTRL* (Vinod)
 - Print ret on some error paths (Vinod)
 - Add some acked-by (Peter)

Changes since v3:
 - Remove elf loading code from fdma driver (Vinod)
 - Remove fdma_ prefix for clock names (Arnd)
 - Make _xlate use dma_get_any_channel rather than request_channel (Arnd)
 - Make a common function for _prep_ routines (Vinod)
 - Make driver depend on COMPILE_TEST (Arnd)
 - Remove unnecessary st_fdma_filter_fn (Arnd)
 - Enable FDMA as a module (Arnd)
 - Drop fdma_ clock prefix (Arnd)
 - Fix description as well as example for st, prefix (Arnd)
 - Remove string concatenation from fdma register macros to ease grep'ability (Arnd)
 - Add a XP70 rproc driver for ELF firmware loading and start/stop control (Peter)
 - Add myself as a author of the driver (Peter)

Changes since v2:
 - Change to dma-controller (Arnd)
 - Remove platform data header file and simplifiy code (Arnd)
 - Remove FW_LOADER_USER_HELPER_FALLBACK and rework firmware loading to device config (Vinod)
 - Use SET_RUNTIME_PM_OPS helpers (Vinod)
 - Remove fdma-id dt prop and use compatibles to generate different fdma firmware names (Arnd / Lee)
 - Add sti-asoc-card DT nodes and pinmux config for uniperif player & reader (Peter)
 - Update sti-asoc-card DT binding documentation (Peter)
 - Enable STi audio drivers in multi_v7_defconfig (Peter)

Changes since v1:
 - split into smaller patches for easier / faster review (Vinod)
 - new fill_hw_mode() with common code (Vinod)
 - new config_reqctrl() called from *_prep() instead of device_config cb (Vinod)
 - fdma-xbar support removed (Peter)
 - rework firmware name mechanism so fwname isn't in DT (Peter / Lee)
 - st_fdma_seg_to_mem can be static (Paul)
 - EXPORT_SYMBOL st_fdma_filter_fn not required (Paul)
 - s/channel/channels (vinod)
 - better describe "Must be <3>" (vinod)
 - sizeof(*ehdr) (vinod)
 - print values on error debug (vinod)
 - empty line (Vinod)
 - Update to -EIO (Vinod)
 - Make st_fdma tristate (Paul)
 - Remove __exit tag from .remove (Maxime)
 - Update MAINTAINERS rule to fdma* (Lee)
 - Unit address should match reg property (Lee)

Peter Griffin (18):
  remoteproc: st_slim_rproc: add a slimcore rproc driver
  MAINTAINERS: Add st slim core rproc driver to STi section.
  dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding
    documentation
  dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file
  dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support
  ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
  MAINTAINERS: Add FDMA driver files to STi section.
  ARM: multi_v7_defconfig: Enable STi FDMA driver
  ARM: multi_v7_defconfig: Enable STi and simple-card drivers.
  ARM: DT: STiH407: Add i2s_out pinctrl configuration
  ARM: DT: STiH407: Add i2s_in pinctrl configuration
  ARM: DT: STiH407: Add spdif_out pinctrl config
  ARM: STi: DT: STiH407: Add sti-sasg-codec dt node
  ARM: STi: DT: STiH407: Add uniperif player dt nodes
  ARM: STi: DT: STiH407: Add uniperif reader dt nodes
  ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card
  drm/virtio: kconfig: Fix recursive dependency.
  drm/virtio: kconfig: Fixup white space.

 Documentation/devicetree/bindings/dma/st_fdma.txt |  87 +++
 MAINTAINERS                                       |   3 +
 arch/arm/boot/dts/stih407-family.dtsi             | 161 ++++
 arch/arm/boot/dts/stih407-pinctrl.dtsi            |  55 ++
 arch/arm/boot/dts/stihxxx-b2120.dtsi              |  45 ++
 arch/arm/configs/multi_v7_defconfig               |   4 +
 drivers/dma/Kconfig                               |  14 +-
 drivers/dma/Makefile                              |   1 +
 drivers/dma/st_fdma.c                             | 880 ++++++++++++++++++++++
 drivers/dma/st_fdma.h                             | 244 ++++++
 drivers/gpu/drm/virtio/Kconfig                    |   9 +-
 drivers/remoteproc/Kconfig                        |   8 +
 drivers/remoteproc/Makefile                       |   1 +
 drivers/remoteproc/st_slim_rproc.c                | 364 +++++++++
 include/linux/remoteproc/st_slim_rproc.h          |  53 ++
 15 files changed, 1924 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt
 create mode 100644 drivers/dma/st_fdma.c
 create mode 100644 drivers/dma/st_fdma.h
 create mode 100644 drivers/remoteproc/st_slim_rproc.c
 create mode 100644 include/linux/remoteproc/st_slim_rproc.h

-- 
1.9.1

[toc] | [next] | [standalone]

#1470795 — [PATCH v8 07/18] MAINTAINERS: Add FDMA driver files to STi section.

This patch adds the FDMA driver files to the STi
section of the maintainers file.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd3b24..d21a7b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1739,6 +1739,7 @@ F:	drivers/char/hw_random/st-rng.c
 F:	drivers/clocksource/arm_global_timer.c
 F:	drivers/clocksource/clksrc_st_lpc.c
 F:	drivers/cpufreq/sti-cpufreq.c
+F:	drivers/dma/st_fdma*
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/media/platform/sti/c8sectpfe/
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470796 — [PATCH v8 12/18] ARM: DT: STiH407: Add spdif_out pinctrl config

This patch adds the pinctrl config for the spidf out
pins used by the sasg codec IP.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 537db7e..598dbab 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1114,6 +1114,14 @@
 				};
 			};
 
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
 			serial3 {
 				pinctrl_serial3: serial3-0 {
 					st,pins {
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470797 — [PATCH v8 17/18] drm/virtio: kconfig: Fix recursive dependency.

[..]
drivers/video/fbdev/Kconfig:5:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5:	symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:42:	symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:36:	symbol DRM_KMS_HELPER is selected by DRM_VIRTIO_GPU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/virtio/Kconfig:1:	symbol DRM_VIRTIO_GPU depends on VIRTIO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/virtio/Kconfig:1:	symbol VIRTIO is selected by REMOTEPROC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/remoteproc/Kconfig:4:	symbol REMOTEPROC is selected by ST_SLIM_REMOTEPROC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/remoteproc/Kconfig:103:	symbol ST_SLIM_REMOTEPROC is selected by ST_FDMA
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/dma/Kconfig:440:	symbol ST_FDMA depends on DMADEVICES
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/dma/Kconfig:5:	symbol DMADEVICES is selected by SND_SOC_SH4_SIU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
sound/soc/sh/Kconfig:29:	symbol SND_SOC_SH4_SIU is selected by SND_SIU_MIGOR
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
sound/soc/sh/Kconfig:64:	symbol SND_SIU_MIGOR depends on I2C
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/i2c/Kconfig:7:	symbol I2C is selected by FB_DDC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:63:	symbol FB_DDC is selected by FB_CYBER2000_DDC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:378:	symbol FB_CYBER2000_DDC depends on FB_CYBER2000
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:366:	symbol FB_CYBER2000 depends on FB

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/gpu/drm/virtio/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/virtio/Kconfig b/drivers/gpu/drm/virtio/Kconfig
index e1afc3d..90357d9 100644
--- a/drivers/gpu/drm/virtio/Kconfig
+++ b/drivers/gpu/drm/virtio/Kconfig
@@ -1,6 +1,7 @@
 config DRM_VIRTIO_GPU
 	tristate "Virtio GPU driver"
-	depends on DRM && VIRTIO
+	depends on DRM
+	select VIRTIO
         select DRM_KMS_HELPER
         select DRM_TTM
 	help
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1472373 — Re: [PATCH v8 17/18] drm/virtio: kconfig: Fix recursive dependency.

On Fri, 26 Aug 2016, Peter Griffin wrote:

> [..]
> drivers/video/fbdev/Kconfig:5:error: recursive dependency detected!
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/video/fbdev/Kconfig:5:	symbol FB is selected by DRM_KMS_FB_HELPER
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/gpu/drm/Kconfig:42:	symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/gpu/drm/Kconfig:36:	symbol DRM_KMS_HELPER is selected by DRM_VIRTIO_GPU
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/gpu/drm/virtio/Kconfig:1:	symbol DRM_VIRTIO_GPU depends on VIRTIO
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/virtio/Kconfig:1:	symbol VIRTIO is selected by REMOTEPROC
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/remoteproc/Kconfig:4:	symbol REMOTEPROC is selected by ST_SLIM_REMOTEPROC
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/remoteproc/Kconfig:103:	symbol ST_SLIM_REMOTEPROC is selected by ST_FDMA
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/dma/Kconfig:440:	symbol ST_FDMA depends on DMADEVICES
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/dma/Kconfig:5:	symbol DMADEVICES is selected by SND_SOC_SH4_SIU
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> sound/soc/sh/Kconfig:29:	symbol SND_SOC_SH4_SIU is selected by SND_SIU_MIGOR
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> sound/soc/sh/Kconfig:64:	symbol SND_SIU_MIGOR depends on I2C
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/i2c/Kconfig:7:	symbol I2C is selected by FB_DDC
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/video/fbdev/Kconfig:63:	symbol FB_DDC is selected by FB_CYBER2000_DDC
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/video/fbdev/Kconfig:378:	symbol FB_CYBER2000_DDC depends on FB_CYBER2000
> For a resolution refer to Documentation/kbuild/kconfig-language.txt
> subsection "Kconfig recursive dependency limitations"
> drivers/video/fbdev/Kconfig:366:	symbol FB_CYBER2000 depends on FB

An explanation of why this is happening and why your fix works is
usually helpful here.

> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  drivers/gpu/drm/virtio/Kconfig | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/virtio/Kconfig b/drivers/gpu/drm/virtio/Kconfig
> index e1afc3d..90357d9 100644
> --- a/drivers/gpu/drm/virtio/Kconfig
> +++ b/drivers/gpu/drm/virtio/Kconfig
> @@ -1,6 +1,7 @@
>  config DRM_VIRTIO_GPU
>  	tristate "Virtio GPU driver"
> -	depends on DRM && VIRTIO
> +	depends on DRM
> +	select VIRTIO
>          select DRM_KMS_HELPER
>          select DRM_TTM
>  	help

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[toc] | [prev] | [next] | [standalone]

#1470798 — [PATCH v8 03/18] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation

This patch adds the DT binding documentation for the FDMA constroller
found on STi based chipsets from STMicroelectronics.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/st_fdma.txt | 87 +++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt

diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 0000000..495d853
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,87 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible	: Should be one of
+		 - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg		: Should contain an entry for each name in reg-names
+- reg-names	: Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts	: Should contain one interrupt shared by all channels
+- dma-channels	: Number of channels supported by the controller
+- #dma-cells	: Must be <3>. See DMA client section below
+- clocks	: Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+	fdma0: dma-controller@8e20000 {
+		compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+		reg = <0x8e20000 0x8000>,
+		      <0x8e30000 0x3000>,
+		      <0x8e37000 0x1000>,
+		      <0x8e38000 0x8000>;
+		reg-names = "slimcore", "dmem", "peripherals", "imem";
+		clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+		dma-channels = <16>;
+		#dma-cells = <3>;
+	};
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+	0x0: 0-0.5us
+	0x1: 0.5-1us
+	0x2: 1-1.5us
+ -bit 17: data swap
+	0x0: disabled
+	0x1: enabled
+ -bit 21: Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+	0x0: high priority port
+	0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+	sti_uni_player2: sti-uni-player@2 {
+		compatible = "st,sti-uni-player";
+		status = "disabled";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+		assigned-clock-rates = <50000000>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dai-name = "Uni Player #1 (DAC)";
+		dma-names = "tx";
+		st,uniperiph-id = <2>;
+		st,version = <5>;
+		st,mode = "PCM";
+	};
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470799 — [PATCH v8 02/18] MAINTAINERS: Add st slim core rproc driver to STi section.

This patch adds the slim core rproc driver to the STi section
of the MAINTAINERS file.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0bbe4b1..5dd3b24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1749,6 +1749,7 @@ F:	drivers/phy/phy-stih407-usb.c
 F:	drivers/phy/phy-stih41x-usb.c
 F:	drivers/pinctrl/pinctrl-st.c
 F:	drivers/remoteproc/st_remoteproc.c
+F:	drivers/remoteproc/st_slim_rproc.c
 F:	drivers/reset/sti/
 F:	drivers/rtc/rtc-st-lpc.c
 F:	drivers/tty/serial/st-asc.c
@@ -1757,6 +1758,7 @@ F:	drivers/usb/host/ehci-st.c
 F:	drivers/usb/host/ohci-st.c
 F:	drivers/watchdog/st_lpc_wdt.c
 F:	drivers/ata/ahci_st.c
+F:	include/linux/remoteproc/st_slim_rproc.h
 
 ARM/STM32 ARCHITECTURE
 M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470801 — [PATCH v8 08/18] ARM: multi_v7_defconfig: Enable STi FDMA driver

This DMA controller is found on all STi chipsets.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ea23250..998578a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -784,6 +784,7 @@ CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_XILINX_VDMA=y
 CONFIG_DMA_SUN6I=y
+CONFIG_ST_FDMA=m
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470803 — [PATCH v8 10/18] ARM: DT: STiH407: Add i2s_out pinctrl configuration

This patch adds the pinctrl config for the i2s_out pins
used by the uniperif player IP.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..0fb5c8a 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1067,6 +1067,29 @@
 				};
 			};
 
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
 			serial3 {
 				pinctrl_serial3: serial3-0 {
 					st,pins {
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1470804 — [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support

This patch adds support for the Flexible Direct Memory Access (FDMA) core
driver. The FDMA is a slim core CPU with a dedicated firmware.
It is a general purpose DMA controller capable of supporting 16
independent DMA channels. Data moves maybe from memory to memory
or between memory and paced latency critical real time targets and it
is found on al STi based chipsets.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/dma/Kconfig   |  14 +-
 drivers/dma/Makefile  |   1 +
 drivers/dma/st_fdma.c | 880 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 894 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/st_fdma.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 739f797..5b5a341 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -437,6 +437,19 @@ config STE_DMA40
 	help
 	  Support for ST-Ericsson DMA40 controller
 
+config ST_FDMA
+	tristate "ST FDMA dmaengine support"
+	depends on ARCH_STI
+	select ST_SLIM_REMOTEPROC
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for ST FDMA controller.
+	  It supports 16 independent DMA channels, accepts up to 32 DMA requests
+
+	  Say Y here if you have such a chipset.
+	  If unsure, say N.
+
 config STM32_DMA
 	bool "STMicroelectronics STM32 DMA support"
 	depends on ARCH_STM32
@@ -567,7 +580,6 @@ config ZX_DMA
 	help
 	  Support the DMA engine for ZTE ZX296702 platform devices.
 
-
 # driver files
 source "drivers/dma/bestcomm/Kconfig"
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index e4dc9ca..a4fa336 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
 obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
+obj-$(CONFIG_ST_FDMA) += st_fdma.o
 
 obj-y += qcom/
 obj-y += xilinx/
diff --git a/drivers/dma/st_fdma.c b/drivers/dma/st_fdma.c
new file mode 100644
index 0000000..bb8d8a7
--- /dev/null
+++ b/drivers/dma/st_fdma.c
@@ -0,0 +1,880 @@
+/*
+ * st_fdma.c
+ *
+ * Copyright (C) 2014 STMicroelectronics
+ * Author: Ludovic Barre <Ludovic.barre@st.com>
+ *	   Peter Griffin <peter.griffin@linaro.org>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/remoteproc.h>
+
+#include "st_fdma.h"
+
+static inline struct st_fdma_chan *to_st_fdma_chan(struct dma_chan *c)
+{
+	return container_of(c, struct st_fdma_chan, vchan.chan);
+}
+
+static struct st_fdma_desc *to_st_fdma_desc(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct st_fdma_desc, vdesc);
+}
+
+static int st_fdma_dreq_get(struct st_fdma_chan *fchan)
+{
+	struct st_fdma_dev *fdev = fchan->fdev;
+	u32 req_line_cfg = fchan->cfg.req_line;
+	u32 dreq_line;
+	int try = 0;
+
+	/*
+	 * dreq_mask is shared for n channels of fdma, so all accesses must be
+	 * atomic. if the dreq_mask is changed between ffz and set_bit,
+	 * we retry
+	 */
+	do {
+		if (fdev->dreq_mask == ~0L) {
+			dev_err(fdev->dev, "No req lines available\n");
+			return -EINVAL;
+		}
+
+		if (try || req_line_cfg >= ST_FDMA_NR_DREQS) {
+			dev_err(fdev->dev, "Invalid or used req line\n");
+			return -EINVAL;
+		} else {
+			dreq_line = req_line_cfg;
+		}
+
+		try++;
+	} while (test_and_set_bit(dreq_line, &fdev->dreq_mask));
+
+	dev_dbg(fdev->dev, "get dreq_line:%d mask:%#lx\n",
+		dreq_line, fdev->dreq_mask);
+
+	return dreq_line;
+}
+
+static void st_fdma_dreq_put(struct st_fdma_chan *fchan)
+{
+	struct st_fdma_dev *fdev = fchan->fdev;
+
+	dev_dbg(fdev->dev, "put dreq_line:%#x\n", fchan->dreq_line);
+	clear_bit(fchan->dreq_line, &fdev->dreq_mask);
+}
+
+static void st_fdma_xfer_desc(struct st_fdma_chan *fchan)
+{
+	struct virt_dma_desc *vdesc;
+	unsigned long nbytes, ch_cmd, cmd;
+
+	vdesc = vchan_next_desc(&fchan->vchan);
+	if (!vdesc)
+		return;
+
+	fchan->fdesc = to_st_fdma_desc(vdesc);
+	nbytes = fchan->fdesc->node[0].desc->nbytes;
+	cmd = FDMA_CMD_START(fchan->vchan.chan.chan_id);
+	ch_cmd = fchan->fdesc->node[0].pdesc | FDMA_CH_CMD_STA_START;
+
+	/* start the channel for the descriptor */
+	fnode_write(fchan, nbytes, FDMA_CNTN_OFST);
+	fchan_write(fchan, ch_cmd, FDMA_CH_CMD_OFST);
+	writel(cmd,
+		fchan->fdev->slim_rproc->peri + FDMA_CMD_SET_OFST);
+
+	dev_dbg(fchan->fdev->dev, "start chan:%d\n", fchan->vchan.chan.chan_id);
+}
+
+static void st_fdma_ch_sta_update(struct st_fdma_chan *fchan,
+				  unsigned long int_sta)
+{
+	unsigned long ch_sta, ch_err;
+	int ch_id = fchan->vchan.chan.chan_id;
+	struct st_fdma_dev *fdev = fchan->fdev;
+
+	ch_sta = fchan_read(fchan, FDMA_CH_CMD_OFST);
+	ch_err = ch_sta & FDMA_CH_CMD_ERR_MASK;
+	ch_sta &= FDMA_CH_CMD_STA_MASK;
+
+	if (int_sta & FDMA_INT_STA_ERR) {
+		dev_warn(fdev->dev, "chan:%d, error:%ld\n", ch_id, ch_err);
+		fchan->status = DMA_ERROR;
+		return;
+	}
+
+	switch (ch_sta) {
+	case FDMA_CH_CMD_STA_PAUSED:
+		fchan->status = DMA_PAUSED;
+		break;
+
+	case FDMA_CH_CMD_STA_RUNNING:
+		fchan->status = DMA_IN_PROGRESS;
+		break;
+	}
+}
+
+static irqreturn_t st_fdma_irq_handler(int irq, void *dev_id)
+{
+	struct st_fdma_dev *fdev = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+	struct st_fdma_chan *fchan = &fdev->chans[0];
+	unsigned long int_sta, clr;
+
+	int_sta = fdma_read(fdev, FDMA_INT_STA_OFST);
+	clr = int_sta;
+
+	for (; int_sta != 0 ; int_sta >>= 2, fchan++) {
+		if (!(int_sta & (FDMA_INT_STA_CH | FDMA_INT_STA_ERR)))
+			continue;
+
+		spin_lock(&fchan->vchan.lock);
+		st_fdma_ch_sta_update(fchan, int_sta);
+
+		if (fchan->fdesc) {
+			if (!fchan->fdesc->iscyclic) {
+				list_del(&fchan->fdesc->vdesc.node);
+				vchan_cookie_complete(&fchan->fdesc->vdesc);
+				fchan->fdesc = NULL;
+				fchan->status = DMA_COMPLETE;
+			} else {
+				vchan_cyclic_callback(&fchan->fdesc->vdesc);
+			}
+
+			/* Start the next descriptor (if available) */
+			if (!fchan->fdesc)
+				st_fdma_xfer_desc(fchan);
+		}
+
+		spin_unlock(&fchan->vchan.lock);
+		ret = IRQ_HANDLED;
+	}
+
+	fdma_write(fdev, clr, FDMA_INT_CLR_OFST);
+
+	return ret;
+}
+
+static struct dma_chan *st_fdma_of_xlate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct st_fdma_dev *fdev = ofdma->of_dma_data;
+	struct dma_chan *chan;
+	struct st_fdma_chan *fchan;
+	int ret;
+
+	if (dma_spec->args_count < 1)
+		return ERR_PTR(-EINVAL);
+
+	if (fdev->dma_device.dev->of_node != dma_spec->np)
+		return ERR_PTR(-EINVAL);
+
+	ret = rproc_boot(fdev->slim_rproc->rproc);
+	if (ret == -ENOENT)
+		return ERR_PTR(-EPROBE_DEFER);
+	else if (ret)
+		return ERR_PTR(ret);
+
+	chan = dma_get_any_slave_channel(&fdev->dma_device);
+	if (!chan)
+		goto err_chan;
+
+	fchan = to_st_fdma_chan(chan);
+
+	fchan->cfg.of_node = dma_spec->np;
+	fchan->cfg.req_line = dma_spec->args[0];
+	fchan->cfg.req_ctrl = 0;
+	fchan->cfg.type = ST_FDMA_TYPE_FREE_RUN;
+
+	if (dma_spec->args_count > 1)
+		fchan->cfg.req_ctrl = dma_spec->args[1]
+			& FDMA_REQ_CTRL_CFG_MASK;
+
+	if (dma_spec->args_count > 2)
+		fchan->cfg.type = dma_spec->args[2];
+
+	if (fchan->cfg.type == ST_FDMA_TYPE_FREE_RUN) {
+		fchan->dreq_line = 0;
+	} else {
+		fchan->dreq_line = st_fdma_dreq_get(fchan);
+		if (IS_ERR_VALUE(fchan->dreq_line)) {
+			chan = ERR_PTR(fchan->dreq_line);
+			goto err_chan;
+		}
+	}
+
+	dev_dbg(fdev->dev, "xlate req_line:%d type:%d req_ctrl:%#lx\n",
+		fchan->cfg.req_line, fchan->cfg.type, fchan->cfg.req_ctrl);
+
+	return chan;
+
+err_chan:
+	rproc_shutdown(fdev->slim_rproc->rproc);
+	return chan;
+
+}
+
+static void st_fdma_free_desc(struct virt_dma_desc *vdesc)
+{
+	struct st_fdma_desc *fdesc;
+	int i;
+
+	fdesc = to_st_fdma_desc(vdesc);
+	for (i = 0; i < fdesc->n_nodes; i++)
+		dma_pool_free(fdesc->fchan->node_pool, fdesc->node[i].desc,
+			      fdesc->node[i].pdesc);
+	kfree(fdesc);
+}
+
+static struct st_fdma_desc *st_fdma_alloc_desc(struct st_fdma_chan *fchan,
+					       int sg_len)
+{
+	struct st_fdma_desc *fdesc;
+	int i;
+
+	fdesc = kzalloc(sizeof(*fdesc) +
+			sizeof(struct st_fdma_sw_node) * sg_len, GFP_NOWAIT);
+	if (!fdesc)
+		return NULL;
+
+	fdesc->fchan = fchan;
+	fdesc->n_nodes = sg_len;
+	for (i = 0; i < sg_len; i++) {
+		fdesc->node[i].desc = dma_pool_alloc(fchan->node_pool,
+				GFP_NOWAIT, &fdesc->node[i].pdesc);
+		if (!fdesc->node[i].desc)
+			goto err;
+	}
+	return fdesc;
+
+err:
+	while (--i >= 0)
+		dma_pool_free(fchan->node_pool, fdesc->node[i].desc,
+			      fdesc->node[i].pdesc);
+	kfree(fdesc);
+	return NULL;
+}
+
+static int st_fdma_alloc_chan_res(struct dma_chan *chan)
+{
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+
+	/* Create the dma pool for descriptor allocation */
+	fchan->node_pool = dma_pool_create(dev_name(&chan->dev->device),
+					    fchan->fdev->dev,
+					    sizeof(struct st_fdma_hw_node),
+					    __alignof__(struct st_fdma_hw_node),
+					    0);
+
+	if (!fchan->node_pool) {
+		dev_err(fchan->fdev->dev, "unable to allocate desc pool\n");
+		return -ENOMEM;
+	}
+
+	dev_dbg(fchan->fdev->dev, "alloc ch_id:%d type:%d\n",
+		fchan->vchan.chan.chan_id, fchan->cfg.type);
+
+	return 0;
+}
+
+static void st_fdma_free_chan_res(struct dma_chan *chan)
+{
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	struct rproc *rproc = fchan->fdev->slim_rproc->rproc;
+	unsigned long flags;
+
+	LIST_HEAD(head);
+
+	dev_dbg(fchan->fdev->dev, "%s: freeing chan:%d\n",
+		__func__, fchan->vchan.chan.chan_id);
+
+	if (fchan->cfg.type != ST_FDMA_TYPE_FREE_RUN)
+		st_fdma_dreq_put(fchan);
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+	fchan->fdesc = NULL;
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+
+	dma_pool_destroy(fchan->node_pool);
+	fchan->node_pool = NULL;
+	memset(&fchan->cfg, 0, sizeof(struct st_fdma_cfg));
+
+	rproc_shutdown(rproc);
+}
+
+static struct dma_async_tx_descriptor *st_fdma_prep_dma_memcpy(
+	struct dma_chan *chan,	dma_addr_t dst, dma_addr_t src,
+	size_t len, unsigned long flags)
+{
+	struct st_fdma_chan *fchan;
+	struct st_fdma_desc *fdesc;
+	struct st_fdma_hw_node *hw_node;
+
+	if (!len)
+		return NULL;
+
+	fchan = to_st_fdma_chan(chan);
+
+	/* We only require a single descriptor */
+	fdesc = st_fdma_alloc_desc(fchan, 1);
+	if (!fdesc) {
+		dev_err(fchan->fdev->dev, "no memory for desc\n");
+		return NULL;
+	}
+
+	hw_node = fdesc->node[0].desc;
+	hw_node->next = 0;
+	hw_node->control = FDMA_NODE_CTRL_REQ_MAP_FREE_RUN;
+	hw_node->control |= FDMA_NODE_CTRL_SRC_INCR;
+	hw_node->control |= FDMA_NODE_CTRL_DST_INCR;
+	hw_node->control |= FDMA_NODE_CTRL_INT_EON;
+	hw_node->nbytes = len;
+	hw_node->saddr = src;
+	hw_node->daddr = dst;
+	hw_node->generic.length = len;
+	hw_node->generic.sstride = 0;
+	hw_node->generic.dstride = 0;
+
+	return vchan_tx_prep(&fchan->vchan, &fdesc->vdesc, flags);
+}
+
+static int config_reqctrl(struct st_fdma_chan *fchan,
+			  enum dma_transfer_direction direction)
+{
+	u32 maxburst = 0, addr = 0;
+	enum dma_slave_buswidth width;
+	int ch_id = fchan->vchan.chan.chan_id;
+	struct st_fdma_dev *fdev = fchan->fdev;
+
+	switch (direction) {
+
+	case DMA_DEV_TO_MEM:
+		fchan->cfg.req_ctrl &= ~FDMA_REQ_CTRL_WNR;
+		maxburst = fchan->scfg.src_maxburst;
+		width = fchan->scfg.src_addr_width;
+		addr = fchan->scfg.src_addr;
+		break;
+
+	case DMA_MEM_TO_DEV:
+		fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_WNR;
+		maxburst = fchan->scfg.dst_maxburst;
+		width = fchan->scfg.dst_addr_width;
+		addr = fchan->scfg.dst_addr;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	fchan->cfg.req_ctrl &= ~FDMA_REQ_CTRL_OPCODE_MASK;
+
+	switch (width) {
+
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_OPCODE_LD_ST1;
+		break;
+
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_OPCODE_LD_ST2;
+		break;
+
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_OPCODE_LD_ST4;
+		break;
+
+	case DMA_SLAVE_BUSWIDTH_8_BYTES:
+		fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_OPCODE_LD_ST8;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	fchan->cfg.req_ctrl &= ~FDMA_REQ_CTRL_NUM_OPS_MASK;
+	fchan->cfg.req_ctrl |= FDMA_REQ_CTRL_NUM_OPS(maxburst-1);
+	dreq_write(fchan, fchan->cfg.req_ctrl, FDMA_REQ_CTRL_OFST);
+
+	fchan->cfg.dev_addr = addr;
+	fchan->cfg.dir = direction;
+
+	dev_dbg(fdev->dev, "chan:%d config_reqctrl:%#x req_ctrl:%#lx\n",
+		ch_id, addr, fchan->cfg.req_ctrl);
+
+	return 0;
+}
+
+static void fill_hw_node(struct st_fdma_hw_node *hw_node,
+			struct st_fdma_chan *fchan,
+			enum dma_transfer_direction direction)
+{
+	if (direction == DMA_MEM_TO_DEV) {
+		hw_node->control |= FDMA_NODE_CTRL_SRC_INCR;
+		hw_node->control |= FDMA_NODE_CTRL_DST_STATIC;
+		hw_node->daddr = fchan->cfg.dev_addr;
+	} else {
+		hw_node->control |= FDMA_NODE_CTRL_SRC_STATIC;
+		hw_node->control |= FDMA_NODE_CTRL_DST_INCR;
+		hw_node->saddr = fchan->cfg.dev_addr;
+	}
+
+	hw_node->generic.sstride = 0;
+	hw_node->generic.dstride = 0;
+}
+
+static inline struct st_fdma_chan *st_fdma_prep_common(struct dma_chan *chan,
+		size_t len, enum dma_transfer_direction direction)
+{
+	struct st_fdma_chan *fchan;
+
+	if (!chan || !len)
+		return NULL;
+
+	fchan = to_st_fdma_chan(chan);
+
+	if (!is_slave_direction(direction)) {
+		dev_err(fchan->fdev->dev, "bad direction?\n");
+		return NULL;
+	}
+
+	return fchan;
+}
+
+static struct dma_async_tx_descriptor *st_fdma_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags)
+{
+	struct st_fdma_chan *fchan;
+	struct st_fdma_desc *fdesc;
+	int sg_len, i;
+
+	fchan = st_fdma_prep_common(chan, len, direction);
+	if (!fchan)
+		return NULL;
+
+	if (!period_len)
+		return NULL;
+
+	if (config_reqctrl(fchan, direction)) {
+		dev_err(fchan->fdev->dev, "bad width or direction\n");
+		return NULL;
+	}
+
+	/* the buffer length must be a multiple of period_len */
+	if (len % period_len != 0) {
+		dev_err(fchan->fdev->dev, "len is not multiple of period\n");
+		return NULL;
+	}
+
+	sg_len = len / period_len;
+	fdesc = st_fdma_alloc_desc(fchan, sg_len);
+	if (!fdesc) {
+		dev_err(fchan->fdev->dev, "no memory for desc\n");
+		return NULL;
+	}
+
+	fdesc->iscyclic = true;
+
+	for (i = 0; i < sg_len; i++) {
+		struct st_fdma_hw_node *hw_node = fdesc->node[i].desc;
+
+		hw_node->next = fdesc->node[(i + 1) % sg_len].pdesc;
+
+		hw_node->control =
+			FDMA_NODE_CTRL_REQ_MAP_DREQ(fchan->dreq_line);
+		hw_node->control |= FDMA_NODE_CTRL_INT_EON;
+
+		fill_hw_node(hw_node, fchan, direction);
+
+		if (direction == DMA_MEM_TO_DEV)
+			hw_node->saddr = buf_addr + (i * period_len);
+		else
+			hw_node->daddr = buf_addr + (i * period_len);
+
+		hw_node->nbytes = period_len;
+		hw_node->generic.length = period_len;
+	}
+
+	return vchan_tx_prep(&fchan->vchan, &fdesc->vdesc, flags);
+}
+
+static struct dma_async_tx_descriptor *st_fdma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct st_fdma_chan *fchan;
+	struct st_fdma_desc *fdesc;
+	struct st_fdma_hw_node *hw_node;
+	struct scatterlist *sg;
+	int i;
+
+	fchan = st_fdma_prep_common(chan, sg_len, direction);
+	if (!fchan)
+		return NULL;
+
+	if (!sgl)
+		return NULL;
+
+	fdesc = st_fdma_alloc_desc(fchan, sg_len);
+	if (!fdesc) {
+		dev_err(fchan->fdev->dev, "no memory for desc\n");
+		return NULL;
+	}
+
+	fdesc->iscyclic = false;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		hw_node = fdesc->node[i].desc;
+
+		hw_node->next = fdesc->node[(i + 1) % sg_len].pdesc;
+		hw_node->control = FDMA_NODE_CTRL_REQ_MAP_DREQ(fchan->dreq_line);
+
+		fill_hw_node(hw_node, fchan, direction);
+
+		if (direction == DMA_MEM_TO_DEV)
+			hw_node->saddr = sg_dma_address(sg);
+		else
+			hw_node->daddr = sg_dma_address(sg);
+
+		hw_node->nbytes = sg_dma_len(sg);
+		hw_node->generic.length = sg_dma_len(sg);
+	}
+
+	/* interrupt at end of last node */
+	hw_node->control |= FDMA_NODE_CTRL_INT_EON;
+
+	return vchan_tx_prep(&fchan->vchan, &fdesc->vdesc, flags);
+}
+
+static size_t st_fdma_desc_residue(struct st_fdma_chan *fchan,
+				   struct virt_dma_desc *vdesc,
+				   bool in_progress)
+{
+	struct st_fdma_desc *fdesc = fchan->fdesc;
+	size_t residue = 0;
+	dma_addr_t cur_addr = 0;
+	int i;
+
+	if (in_progress) {
+		cur_addr = fchan_read(fchan, FDMA_CH_CMD_OFST);
+		cur_addr &= FDMA_CH_CMD_DATA_MASK;
+	}
+
+	for (i = fchan->fdesc->n_nodes - 1 ; i >= 0; i--) {
+		if (cur_addr == fdesc->node[i].pdesc) {
+			residue += fnode_read(fchan, FDMA_CNTN_OFST);
+			break;
+		}
+		residue += fdesc->node[i].desc->nbytes;
+	}
+
+	return residue;
+}
+
+static enum dma_status st_fdma_tx_status(struct dma_chan *chan,
+					 dma_cookie_t cookie,
+					 struct dma_tx_state *txstate)
+{
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	struct virt_dma_desc *vd;
+	enum dma_status ret;
+	unsigned long flags;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE || !txstate)
+		return ret;
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+	vd = vchan_find_desc(&fchan->vchan, cookie);
+	if (fchan->fdesc && cookie == fchan->fdesc->vdesc.tx.cookie)
+		txstate->residue = st_fdma_desc_residue(fchan, vd, true);
+	else if (vd)
+		txstate->residue = st_fdma_desc_residue(fchan, vd, false);
+	else
+		txstate->residue = 0;
+
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+
+	return ret;
+}
+
+static void st_fdma_issue_pending(struct dma_chan *chan)
+{
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+
+	if (vchan_issue_pending(&fchan->vchan) && !fchan->fdesc)
+		st_fdma_xfer_desc(fchan);
+
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+}
+
+static int st_fdma_pause(struct dma_chan *chan)
+{
+	unsigned long flags;
+	LIST_HEAD(head);
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	int ch_id = fchan->vchan.chan.chan_id;
+	unsigned long cmd = FDMA_CMD_PAUSE(ch_id);
+
+	dev_dbg(fchan->fdev->dev, "pause chan:%d\n", ch_id);
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+	if (fchan->fdesc)
+		fdma_write(fchan->fdev, cmd, FDMA_CMD_SET_OFST);
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+
+	return 0;
+}
+
+static int st_fdma_resume(struct dma_chan *chan)
+{
+	unsigned long flags;
+	unsigned long val;
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	int ch_id = fchan->vchan.chan.chan_id;
+
+	dev_dbg(fchan->fdev->dev, "resume chan:%d\n", ch_id);
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+	if (fchan->fdesc) {
+		val = fchan_read(fchan, FDMA_CH_CMD_OFST);
+		val &= FDMA_CH_CMD_DATA_MASK;
+		fchan_write(fchan, val, FDMA_CH_CMD_OFST);
+	}
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+
+	return 0;
+}
+
+static int st_fdma_terminate_all(struct dma_chan *chan)
+{
+	unsigned long flags;
+	LIST_HEAD(head);
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+	int ch_id = fchan->vchan.chan.chan_id;
+	unsigned long cmd = FDMA_CMD_PAUSE(ch_id);
+
+	dev_dbg(fchan->fdev->dev, "terminate chan:%d\n", ch_id);
+
+	spin_lock_irqsave(&fchan->vchan.lock, flags);
+	fdma_write(fchan->fdev, cmd, FDMA_CMD_SET_OFST);
+	fchan->fdesc = NULL;
+	vchan_get_all_descriptors(&fchan->vchan, &head);
+	spin_unlock_irqrestore(&fchan->vchan.lock, flags);
+	vchan_dma_desc_free_list(&fchan->vchan, &head);
+
+	return 0;
+}
+
+static int st_fdma_slave_config(struct dma_chan *chan,
+				struct dma_slave_config *slave_cfg)
+{
+	struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
+
+	memcpy(&fchan->scfg, slave_cfg, sizeof(fchan->scfg));
+	return 0;
+}
+
+static const struct st_fdma_driverdata fdma_mpe31_stih407_11 = {
+	.name = "STiH407",
+	.id = 0,
+};
+
+static const struct st_fdma_driverdata fdma_mpe31_stih407_12 = {
+	.name = "STiH407",
+	.id = 1,
+};
+
+static const struct st_fdma_driverdata fdma_mpe31_stih407_13 = {
+	.name = "STiH407",
+	.id = 2,
+};
+
+static const struct of_device_id st_fdma_match[] = {
+	{ .compatible = "st,stih407-fdma-mpe31-11"
+	  , .data = &fdma_mpe31_stih407_11 },
+	{ .compatible = "st,stih407-fdma-mpe31-12"
+	  , .data = &fdma_mpe31_stih407_12 },
+	{ .compatible = "st,stih407-fdma-mpe31-13"
+	  , .data = &fdma_mpe31_stih407_13 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_fdma_match);
+
+static int st_fdma_parse_dt(struct platform_device *pdev,
+			const struct st_fdma_driverdata *drvdata,
+			struct st_fdma_dev *fdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		goto err;
+
+	ret = of_property_read_u32(np, "dma-channels", &fdev->nr_channels);
+	if (ret)
+		goto err;
+
+	snprintf(fdev->fw_name, FW_NAME_SIZE, "fdma_%s_%d.elf",
+		drvdata->name, drvdata->id);
+
+err:
+	return ret;
+}
+#define FDMA_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+static int st_fdma_probe(struct platform_device *pdev)
+{
+	struct st_fdma_dev *fdev;
+	const struct of_device_id *match;
+	struct device_node *np = pdev->dev.of_node;
+	const struct st_fdma_driverdata *drvdata;
+	int ret, i;
+
+	match = of_match_device((st_fdma_match), &pdev->dev);
+	if (!match || !match->data) {
+		dev_err(&pdev->dev, "No device match found\n");
+		return -ENODEV;
+	}
+
+	drvdata = match->data;
+
+	fdev = devm_kzalloc(&pdev->dev, sizeof(*fdev), GFP_KERNEL);
+	if (!fdev)
+		return -ENOMEM;
+
+	ret = st_fdma_parse_dt(pdev, drvdata, fdev);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to find platform data\n");
+		goto err;
+	}
+
+	fdev->chans = devm_kzalloc(&pdev->dev,
+				   fdev->nr_channels
+				   * sizeof(struct st_fdma_chan), GFP_KERNEL);
+	if (!fdev->chans)
+		return -ENOMEM;
+
+	fdev->dev = &pdev->dev;
+	fdev->drvdata = drvdata;
+	platform_set_drvdata(pdev, fdev);
+
+	fdev->irq = platform_get_irq(pdev, 0);
+	if (fdev->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get irq resource\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev, fdev->irq, st_fdma_irq_handler, 0,
+			       dev_name(&pdev->dev), fdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq (%d)\n", ret);
+		goto err;
+	}
+
+	fdev->slim_rproc = st_slim_rproc_alloc(pdev, fdev->fw_name);
+	if (!fdev->slim_rproc) {
+		ret = PTR_ERR(fdev->slim_rproc);
+		dev_err(&pdev->dev, "slim_rproc_alloc failed (%d)\n", ret);
+		goto err;
+	}
+
+	/* Initialise list of FDMA channels */
+	INIT_LIST_HEAD(&fdev->dma_device.channels);
+	for (i = 0; i < fdev->nr_channels; i++) {
+		struct st_fdma_chan *fchan = &fdev->chans[i];
+
+		fchan->fdev = fdev;
+		fchan->vchan.desc_free = st_fdma_free_desc;
+		vchan_init(&fchan->vchan, &fdev->dma_device);
+	}
+
+	/* Initialise the FDMA dreq (reserve 0 & 31 for FDMA use) */
+	fdev->dreq_mask = BIT(0) | BIT(31);
+
+	dma_cap_set(DMA_SLAVE, fdev->dma_device.cap_mask);
+	dma_cap_set(DMA_CYCLIC, fdev->dma_device.cap_mask);
+	dma_cap_set(DMA_MEMCPY, fdev->dma_device.cap_mask);
+
+	fdev->dma_device.dev = &pdev->dev;
+	fdev->dma_device.device_alloc_chan_resources = st_fdma_alloc_chan_res;
+	fdev->dma_device.device_free_chan_resources = st_fdma_free_chan_res;
+	fdev->dma_device.device_prep_dma_cyclic	= st_fdma_prep_dma_cyclic;
+	fdev->dma_device.device_prep_slave_sg = st_fdma_prep_slave_sg;
+	fdev->dma_device.device_prep_dma_memcpy = st_fdma_prep_dma_memcpy;
+	fdev->dma_device.device_tx_status = st_fdma_tx_status;
+	fdev->dma_device.device_issue_pending = st_fdma_issue_pending;
+	fdev->dma_device.device_terminate_all = st_fdma_terminate_all;
+	fdev->dma_device.device_config = st_fdma_slave_config;
+	fdev->dma_device.device_pause = st_fdma_pause;
+	fdev->dma_device.device_resume = st_fdma_resume;
+
+	fdev->dma_device.src_addr_widths = FDMA_DMA_BUSWIDTHS;
+	fdev->dma_device.dst_addr_widths = FDMA_DMA_BUSWIDTHS;
+	fdev->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	fdev->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+
+	ret = dma_async_device_register(&fdev->dma_device);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to register DMA device (%d)\n", ret);
+		goto err_rproc;
+	}
+
+	ret = of_dma_controller_register(np, st_fdma_of_xlate, fdev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to register controller (%d)\n", ret);
+		goto err_dma_dev;
+	}
+
+	dev_info(&pdev->dev, "ST FDMA engine driver, irq:%d\n", fdev->irq);
+
+	return 0;
+
+err_dma_dev:
+	dma_async_device_unregister(&fdev->dma_device);
+err_rproc:
+	st_slim_rproc_put(fdev->slim_rproc);
+err:
+	return ret;
+}
+
+static int st_fdma_remove(struct platform_device *pdev)
+{
+	struct st_fdma_dev *fdev = platform_get_drvdata(pdev);
+
+	devm_free_irq(&pdev->dev, fdev->irq, fdev);
+	st_slim_rproc_put(fdev->slim_rproc);
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&fdev->dma_device);
+
+	return 0;
+}
+
+static struct platform_driver st_fdma_platform_driver = {
+	.driver = {
+		.name = "st-fdma",
+		.of_match_table = st_fdma_match,
+	},
+	.probe = st_fdma_probe,
+	.remove = st_fdma_remove,
+};
+module_platform_driver(st_fdma_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
+MODULE_AUTHOR("Ludovic.barre <Ludovic.barre@st.com>");
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1472618 — Re: [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support

On Fri, Aug 26, 2016 at 03:56:40PM +0100, Peter Griffin wrote:

>  config STM32_DMA
>  	bool "STMicroelectronics STM32 DMA support"
>  	depends on ARCH_STM32
> @@ -567,7 +580,6 @@ config ZX_DMA
>  	help
>  	  Support the DMA engine for ZTE ZX296702 platform devices.
>  
> -

unrelated change?

> +	fdev->chans = devm_kzalloc(&pdev->dev,
> +				   fdev->nr_channels
> +				   * sizeof(struct st_fdma_chan), GFP_KERNEL);

devm_kcalloc()

> +	if (!fdev->chans)
> +		return -ENOMEM;
> +
> +	fdev->dev = &pdev->dev;
> +	fdev->drvdata = drvdata;
> +	platform_set_drvdata(pdev, fdev);
> +
> +	fdev->irq = platform_get_irq(pdev, 0);
> +	if (fdev->irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get irq resource\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, fdev->irq, st_fdma_irq_handler, 0,
> +			       dev_name(&pdev->dev), fdev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to request irq (%d)\n", ret);
> +		goto err;
> +	}
> +
> +	fdev->slim_rproc = st_slim_rproc_alloc(pdev, fdev->fw_name);
> +	if (!fdev->slim_rproc) {
> +		ret = PTR_ERR(fdev->slim_rproc);
> +		dev_err(&pdev->dev, "slim_rproc_alloc failed (%d)\n", ret);
> +		goto err;
> +	}
> +
> +	/* Initialise list of FDMA channels */
> +	INIT_LIST_HEAD(&fdev->dma_device.channels);
> +	for (i = 0; i < fdev->nr_channels; i++) {
> +		struct st_fdma_chan *fchan = &fdev->chans[i];
> +
> +		fchan->fdev = fdev;
> +		fchan->vchan.desc_free = st_fdma_free_desc;
> +		vchan_init(&fchan->vchan, &fdev->dma_device);

this initialized a tasklet

> +static int st_fdma_remove(struct platform_device *pdev)
> +{
> +	struct st_fdma_dev *fdev = platform_get_drvdata(pdev);
> +
> +	devm_free_irq(&pdev->dev, fdev->irq, fdev);
> +	st_slim_rproc_put(fdev->slim_rproc);
> +	of_dma_controller_free(pdev->dev.of_node);
> +	dma_async_device_unregister(&fdev->dma_device);

and that vchan tasklet is not quisced here :(

> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
> +MODULE_AUTHOR("Ludovic.barre <Ludovic.barre@st.com>");
> +MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");

No MODULE_ALIAS?

-- 
~Vinod

[toc] | [prev] | [next] | [standalone]

#1474247 — Re: [PATCH v8 05/18] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support

Hi Vinod,

Thanks for reviewing.

On Tue, 30 Aug 2016, Vinod Koul wrote:

> On Fri, Aug 26, 2016 at 03:56:40PM +0100, Peter Griffin wrote:
> 
> >  config STM32_DMA
> >  	bool "STMicroelectronics STM32 DMA support"
> >  	depends on ARCH_STM32
> > @@ -567,7 +580,6 @@ config ZX_DMA
> >  	help
> >  	  Support the DMA engine for ZTE ZX296702 platform devices.
> >  
> > -
> 
> unrelated change?

OK will remove and send a separate patch.
> 
> > +	fdev->chans = devm_kzalloc(&pdev->dev,
> > +				   fdev->nr_channels
> > +				   * sizeof(struct st_fdma_chan), GFP_KERNEL);
> 
> devm_kcalloc()

Will fix in next version.

> 
> > +	if (!fdev->chans)
> > +		return -ENOMEM;
> > +
> > +	fdev->dev = &pdev->dev;
> > +	fdev->drvdata = drvdata;
> > +	platform_set_drvdata(pdev, fdev);
> > +
> > +	fdev->irq = platform_get_irq(pdev, 0);
> > +	if (fdev->irq < 0) {
> > +		dev_err(&pdev->dev, "Failed to get irq resource\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = devm_request_irq(&pdev->dev, fdev->irq, st_fdma_irq_handler, 0,
> > +			       dev_name(&pdev->dev), fdev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to request irq (%d)\n", ret);
> > +		goto err;
> > +	}
> > +
> > +	fdev->slim_rproc = st_slim_rproc_alloc(pdev, fdev->fw_name);
> > +	if (!fdev->slim_rproc) {
> > +		ret = PTR_ERR(fdev->slim_rproc);
> > +		dev_err(&pdev->dev, "slim_rproc_alloc failed (%d)\n", ret);
> > +		goto err;
> > +	}
> > +
> > +	/* Initialise list of FDMA channels */
> > +	INIT_LIST_HEAD(&fdev->dma_device.channels);
> > +	for (i = 0; i < fdev->nr_channels; i++) {
> > +		struct st_fdma_chan *fchan = &fdev->chans[i];
> > +
> > +		fchan->fdev = fdev;
> > +		fchan->vchan.desc_free = st_fdma_free_desc;
> > +		vchan_init(&fchan->vchan, &fdev->dma_device);
> 
> this initialized a tasklet
> 
> > +static int st_fdma_remove(struct platform_device *pdev)
> > +{
> > +	struct st_fdma_dev *fdev = platform_get_drvdata(pdev);
> > +
> > +	devm_free_irq(&pdev->dev, fdev->irq, fdev);
> > +	st_slim_rproc_put(fdev->slim_rproc);
> > +	of_dma_controller_free(pdev->dev.of_node);
> > +	dma_async_device_unregister(&fdev->dma_device);
> 
> and that vchan tasklet is not quisced here :(

Eeek, good spot. Will fix in next version.

> 
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
> > +MODULE_AUTHOR("Ludovic.barre <Ludovic.barre@st.com>");
> > +MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
> 
> No MODULE_ALIAS?

Will add in next version.

regards,

Peter. 

[toc] | [prev] | [next] | [standalone]

#1470805 — [PATCH v8 06/18] ARM: STi: DT: STiH407: Add FDMA driver dt nodes.

These nodes are required to get the fdma driver working
on STiH407 based silicon.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 52 +++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index d294e82..45cab30 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -821,5 +821,57 @@
 			clock-frequency	= <600000000>;
 			st,syscfg	= <&syscfg_core 0x224>;
 		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		};
 	};
 };
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web