Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1470229 > unrolled thread

[PATCH 5/9] staging: fbtft: fb_ssd1331: Fix checkpatch warning

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 5/9] staging: fbtft: fb_ssd1331: Fix checkpatch warning Anson Jacob <ansonjacob.aj@gmail.com> - 2016-08-25 17:40 +0200

#1470229 — [PATCH 5/9] staging: fbtft: fb_ssd1331: Fix checkpatch warning

Fix checkpatch.pl warning:
Block comments use * on subsequent lines

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
---
 drivers/staging/fbtft/fb_ssd1331.c | 40 +++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c
index bd294f8..1d74ac1 100644
--- a/drivers/staging/fbtft/fb_ssd1331.c
+++ b/drivers/staging/fbtft/fb_ssd1331.c
@@ -102,26 +102,26 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 }
 
 /*
-	Grayscale Lookup Table
-	GS1 - GS63
-	The driver Gamma curve contains the relative values between the entries
-	in the Lookup table.
-
-	From datasheet:
-	8.8 Gray Scale Decoder
-
-		there are total 180 Gamma Settings (Setting 0 to Setting 180)
-		available for the Gray Scale table.
-
-		The gray scale is defined in incremental way, with reference
-		to the length of previous table entry:
-			Setting of GS1 has to be >= 0
-			Setting of GS2 has to be > Setting of GS1 +1
-			Setting of GS3 has to be > Setting of GS2 +1
-			:
-			Setting of GS63 has to be > Setting of GS62 +1
-
-*/
+ * Grayscale Lookup Table
+ * GS1 - GS63
+ * The driver Gamma curve contains the relative values between the entries
+ * in the Lookup table.
+ *
+ * From datasheet:
+ * 8.8 Gray Scale Decoder
+ *
+ * there are total 180 Gamma Settings (Setting 0 to Setting 180)
+ * available for the Gray Scale table.
+ *
+ * The gray scale is defined in incremental way, with reference
+ * to the length of previous table entry:
+ * Setting of GS1 has to be >= 0
+ * Setting of GS2 has to be > Setting of GS1 +1
+ * Setting of GS3 has to be > Setting of GS2 +1
+ * :
+ * Setting of GS63 has to be > Setting of GS62 +1
+ *
+ */
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
 	unsigned long tmp[GAMMA_NUM * GAMMA_LEN];
-- 
2.7.4

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web