Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1556801 > unrolled thread

[PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver

Started byeajames.ibm@gmail.com
First post2017-01-11 19:20 +0100
Last post2017-01-15 19:40 +0100
Articles 10 — 3 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
    [PATCH linux v2 3/6] hwmon: occ: Add I2C transport implementation for SCOM operations eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
    [PATCH linux v2 1/6] hwmon: Add core On-Chip Controller support for POWER CPUs eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
    [PATCH linux v2 4/6] hwmon: occ: Add callbacks for parsing P8 OCC datastructures eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
    [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
      Re: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the  P8 OCC Guenter Roeck <linux@roeck-us.net> - 2017-01-15 19:20 +0100
      Re: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the  P8 OCC Guenter Roeck <linux@roeck-us.net> - 2017-01-15 19:40 +0100
    [PATCH linux v2 6/6] hwmon: occ: Add callbacks for parsing P9 OCC datastructures eajames.ibm@gmail.com - 2017-01-11 19:20 +0100
    Re: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller  driver Wolfram Sang <wsa@the-dreams.de> - 2017-01-12 11:00 +0100
    Re: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller  driver Guenter Roeck <linux@roeck-us.net> - 2017-01-15 19:40 +0100

#1556801 — [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver
Message-ID<sYvF8-1NE-11@gated-at.bofh.it>
From: "Edward A. James" <eajames@us.ibm.com>

This patchset adds a hwmon driver to support the OCC (On-Chip Controller)
on the IBM POWER8 and POWER9 processors, from a BMC (Baseboard Management
Controller). The OCC is an embedded processor that provides real time
power and thermal monitoring.

The driver provides an interface on a BMC to poll OCC sensor data, set
user power caps, and perform some basic OCC error handling. It interfaces
with userspace through hwmon.

The driver is currently functional only for the OCC on POWER8 chips.
Communicating with the POWER9 OCC requries FSI support.

Edward A. James (6):
  hwmon: Add core On-Chip Controller support for POWER CPUs
  hwmon: occ: Add sysfs interface
  hwmon: occ: Add I2C transport implementation for SCOM operations
  hwmon: occ: Add callbacks for parsing P8 OCC datastructures
  hwmon: occ: Add hwmon implementation for the P8 OCC
  hwmon: occ: Add callbacks for parsing P9 OCC datastructures

 Documentation/devicetree/bindings/hwmon/occ.txt |  13 +
 Documentation/hwmon/occ                         | 114 +++++
 drivers/hwmon/Kconfig                           |   2 +
 drivers/hwmon/Makefile                          |   1 +
 drivers/hwmon/occ/Kconfig                       |  29 ++
 drivers/hwmon/occ/Makefile                      |   2 +
 drivers/hwmon/occ/occ.c                         | 533 ++++++++++++++++++++++++
 drivers/hwmon/occ/occ.h                         |  83 ++++
 drivers/hwmon/occ/occ_p8.c                      | 254 +++++++++++
 drivers/hwmon/occ/occ_p8.h                      |  31 ++
 drivers/hwmon/occ/occ_p9.c                      | 314 ++++++++++++++
 drivers/hwmon/occ/occ_p9.h                      |  31 ++
 drivers/hwmon/occ/occ_scom_i2c.c                |  73 ++++
 drivers/hwmon/occ/occ_scom_i2c.h                |  26 ++
 drivers/hwmon/occ/occ_sysfs.c                   | 274 ++++++++++++
 drivers/hwmon/occ/occ_sysfs.h                   |  44 ++
 drivers/hwmon/occ/p8_occ_i2c.c                  | 123 ++++++
 drivers/hwmon/occ/scom.h                        |  47 +++
 18 files changed, 1994 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
 create mode 100644 Documentation/hwmon/occ
 create mode 100644 drivers/hwmon/occ/Kconfig
 create mode 100644 drivers/hwmon/occ/Makefile
 create mode 100644 drivers/hwmon/occ/occ.c
 create mode 100644 drivers/hwmon/occ/occ.h
 create mode 100644 drivers/hwmon/occ/occ_p8.c
 create mode 100644 drivers/hwmon/occ/occ_p8.h
 create mode 100644 drivers/hwmon/occ/occ_p9.c
 create mode 100644 drivers/hwmon/occ/occ_p9.h
 create mode 100644 drivers/hwmon/occ/occ_scom_i2c.c
 create mode 100644 drivers/hwmon/occ/occ_scom_i2c.h
 create mode 100644 drivers/hwmon/occ/occ_sysfs.c
 create mode 100644 drivers/hwmon/occ/occ_sysfs.h
 create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c
 create mode 100644 drivers/hwmon/occ/scom.h

-- 
1.9.1

[toc] | [next] | [standalone]

#1556802 — [PATCH linux v2 3/6] hwmon: occ: Add I2C transport implementation for SCOM operations

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 3/6] hwmon: occ: Add I2C transport implementation for SCOM operations
Message-ID<sYvF8-1NE-19@gated-at.bofh.it>
In reply to#1556801
From: "Edward A. James" <eajames@us.ibm.com>

Add functions to send SCOM operations over I2C bus. The BMC can
communicate with the Power8 host processor over I2C, but needs to use SCOM
operations in order to access the OCC register space.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/hwmon/occ/occ_scom_i2c.c | 73 ++++++++++++++++++++++++++++++++++++++++
 drivers/hwmon/occ/occ_scom_i2c.h | 26 ++++++++++++++
 2 files changed, 99 insertions(+)
 create mode 100644 drivers/hwmon/occ/occ_scom_i2c.c
 create mode 100644 drivers/hwmon/occ/occ_scom_i2c.h

diff --git a/drivers/hwmon/occ/occ_scom_i2c.c b/drivers/hwmon/occ/occ_scom_i2c.c
new file mode 100644
index 0000000..a922f83
--- /dev/null
+++ b/drivers/hwmon/occ/occ_scom_i2c.c
@@ -0,0 +1,73 @@
+/*
+ * occ_scom_i2c.c - hwmon OCC driver
+ *
+ * This file contains the functions for performing SCOM operations over I2C bus
+ * to access the OCC.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "scom.h"
+#include "occ_scom_i2c.h"
+
+int occ_i2c_getscom(void *bus, u32 address, u64 *data)
+{
+	ssize_t rc;
+	u64 buf;
+	struct i2c_client *client = bus;
+
+	rc = i2c_master_send(client, (const char *)&address, sizeof(u32));
+	if (rc < 0)
+		return rc;
+	else if (rc != sizeof(u32))
+		return -EIO;
+
+	rc = i2c_master_recv(client, (char *)&buf, sizeof(u64));
+	if (rc < 0)
+		return rc;
+	else if (rc != sizeof(u64))
+		return -EIO;
+
+	*data = be64_to_cpu(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL(occ_i2c_getscom);
+
+int occ_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1)
+{
+	u32 buf[3];
+	ssize_t rc;
+	struct i2c_client *client = bus;
+
+	buf[0] = address;
+	buf[1] = data1;
+	buf[2] = data0;
+
+	rc = i2c_master_send(client, (const char *)buf, sizeof(u32) * 3);
+	if (rc < 0)
+		return rc;
+	else if (rc != sizeof(u32) * 3)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL(occ_i2c_putscom);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("I2C OCC SCOM transport");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/occ/occ_scom_i2c.h b/drivers/hwmon/occ/occ_scom_i2c.h
new file mode 100644
index 0000000..945739c
--- /dev/null
+++ b/drivers/hwmon/occ/occ_scom_i2c.h
@@ -0,0 +1,26 @@
+/*
+ * occ_scom_i2c.h - hwmon OCC driver
+ *
+ * This file contains function protoypes for peforming SCOM operations over I2C
+ * bus to access the OCC.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OCC_SCOM_I2C_H__
+#define __OCC_SCOM_I2C_H__
+
+int occ_i2c_getscom(void *bus, u32 address, u64 *data);
+int occ_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1);
+
+#endif /* __OCC_SCOM_I2C_H__ */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1556803 — [PATCH linux v2 1/6] hwmon: Add core On-Chip Controller support for POWER CPUs

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 1/6] hwmon: Add core On-Chip Controller support for POWER CPUs
Message-ID<sYvF8-1NE-17@gated-at.bofh.it>
In reply to#1556801
From: "Edward A. James" <eajames@us.ibm.com>

Add core support for polling the OCC for it's sensor data and parsing that
data into sensor-specific information.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 Documentation/hwmon/occ    |  40 ++++
 drivers/hwmon/Kconfig      |   2 +
 drivers/hwmon/Makefile     |   1 +
 drivers/hwmon/occ/Kconfig  |  15 ++
 drivers/hwmon/occ/Makefile |   1 +
 drivers/hwmon/occ/occ.c    | 533 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/hwmon/occ/occ.h    |  83 +++++++
 drivers/hwmon/occ/scom.h   |  47 ++++
 8 files changed, 722 insertions(+)
 create mode 100644 Documentation/hwmon/occ
 create mode 100644 drivers/hwmon/occ/Kconfig
 create mode 100644 drivers/hwmon/occ/Makefile
 create mode 100644 drivers/hwmon/occ/occ.c
 create mode 100644 drivers/hwmon/occ/occ.h
 create mode 100644 drivers/hwmon/occ/scom.h

diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ
new file mode 100644
index 0000000..79d1642
--- /dev/null
+++ b/Documentation/hwmon/occ
@@ -0,0 +1,40 @@
+Kernel driver occ
+=================
+
+Supported chips:
+ * ASPEED AST2400
+ * ASPEED AST2500
+
+Please note that the chip must be connected to a POWER8 or POWER9 processor
+(see the BMC - Host Communications section).
+
+Author: Eddie James <eajames@us.ibm.com>
+
+Description
+-----------
+
+This driver implements support for the OCC (On-Chip Controller) on the IBM
+POWER8 and POWER9 processors, from a BMC (Baseboard Management Controller). The
+OCC is an embedded processor that provides real time power and thermal
+monitoring.
+
+This driver provides an interface on a BMC to poll OCC sensor data, set user
+power caps, and perform some basic OCC error handling.
+
+Currently, all versions of the OCC support four types of sensor data: power,
+temperature, frequency, and "caps," which indicate limits and thresholds used
+internally on the OCC.
+
+BMC - Host Communications
+-------------------------
+
+For the POWER8 application, the BMC can communicate with the P8 over I2C bus.
+However, to access the OCC register space, any data transfer must use a SCOM
+operation. SCOM is a procedure to initiate a data transfer, typically of 8
+bytes. SCOMs consist of writing a 32-bit command register and then
+reading/writing two 32-bit data registers. This driver implements these
+SCOM operations over I2C bus in order to communicate with the OCC.
+
+For the POWER9 application, the BMC can communicate with the P9 over FSI bus
+and SBE engine. Once again, SCOM operations are required. This driver will
+implement SCOM ops over FSI/SBE. This will require the FSI driver.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 190d270..e80ca81 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1240,6 +1240,8 @@ config SENSORS_NSA320
 	  This driver can also be built as a module. If so, the module
 	  will be called nsa320-hwmon.
 
+source drivers/hwmon/occ/Kconfig
+
 config SENSORS_PCF8591
 	tristate "Philips PCF8591 ADC/DAC"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d2cb7e8..c7ec5d4 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -169,6 +169,7 @@ obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
 obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o
 
+obj-$(CONFIG_SENSORS_PPC_OCC)	+= occ/
 obj-$(CONFIG_PMBUS)		+= pmbus/
 
 ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
new file mode 100644
index 0000000..cdb64a7
--- /dev/null
+++ b/drivers/hwmon/occ/Kconfig
@@ -0,0 +1,15 @@
+#
+# On Chip Controller configuration
+#
+
+menuconfig SENSORS_PPC_OCC
+	bool "PPC On-Chip Controller"
+	help
+	  If you say yes here you get support to monitor Power CPU
+	  sensors via the On-Chip Controller (OCC).
+
+	  Generally this is used by management controllers such as a BMC
+	  on an OpenPower system.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called occ.
diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
new file mode 100644
index 0000000..93cb52f
--- /dev/null
+++ b/drivers/hwmon/occ/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o
diff --git a/drivers/hwmon/occ/occ.c b/drivers/hwmon/occ/occ.c
new file mode 100644
index 0000000..31e6164
--- /dev/null
+++ b/drivers/hwmon/occ/occ.c
@@ -0,0 +1,533 @@
+/*
+ * occ.c - OCC hwmon driver
+ *
+ * This file contains the methods and data structures for the OCC hwmon driver.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/unaligned.h>
+
+#include "occ.h"
+
+#define OCC_DATA_MAX		4096
+#define OCC_BMC_TIMEOUT_MS	20000
+
+/* To generate attn to OCC */
+#define ATTN_DATA		0x0006B035
+
+/* For BMC to read/write SRAM */
+#define OCB_ADDRESS		0x0006B070
+#define OCB_DATA		0x0006B075
+#define OCB_STATUS_CONTROL_AND	0x0006B072
+#define OCB_STATUS_CONTROL_OR	0x0006B073
+
+/* To init OCB */
+#define OCB_AND_INIT0		0xFBFFFFFF
+#define OCB_AND_INIT1		0xFFFFFFFF
+#define OCB_OR_INIT0		0x08000000
+#define OCB_OR_INIT1		0x00000000
+
+/* To generate attention on OCC */
+#define ATTN0			0x01010000
+#define ATTN1			0x00000000
+
+/* OCC return status */
+#define RESP_RETURN_CMD_IN_PRG	0xFF
+#define RESP_RETURN_SUCCESS	0
+#define RESP_RETURN_CMD_INVAL	0x11
+#define RESP_RETURN_CMD_LEN	0x12
+#define RESP_RETURN_DATA_INVAL	0x13
+#define RESP_RETURN_CHKSUM	0x14
+#define RESP_RETURN_OCC_ERR	0x15
+#define RESP_RETURN_STATE	0x16
+
+/* time interval to retry on "command in progress" return status */
+#define CMD_IN_PRG_INT_MS	100
+#define CMD_IN_PRG_RETRIES	(OCC_BMC_TIMEOUT_MS / CMD_IN_PRG_INT_MS)
+
+/* OCC command definitions */
+#define OCC_POLL		0
+#define OCC_SET_USER_POWR_CAP	0x22
+
+/* OCC poll command data */
+#define OCC_POLL_STAT_SENSOR	0x10
+
+/* OCC response data offsets */
+#define RESP_RETURN_STATUS	2
+#define RESP_DATA_LENGTH	3
+#define RESP_HEADER_OFFSET	5
+#define SENSOR_STR_OFFSET	37
+#define SENSOR_BLOCK_NUM_OFFSET	43
+#define SENSOR_BLOCK_OFFSET	45
+
+/* occ_poll_header
+ * structure to match the raw occ poll response data
+ */
+struct occ_poll_header {
+	u8 status;
+	u8 ext_status;
+	u8 occs_present;
+	u8 config;
+	u8 occ_state;
+	u8 mode;
+	u8 ips_status;
+	u8 error_log_id;
+	u32 error_log_addr_start;
+	u16 error_log_length;
+	u8 reserved2;
+	u8 reserved3;
+	u8 occ_code_level[16];
+	u8 sensor_eye_catcher[6];
+	u8 sensor_block_num;
+	u8 sensor_data_version;
+} __attribute__((packed, aligned(4)));
+
+struct occ_response {
+	struct occ_poll_header header;
+	struct occ_blocks data;
+};
+
+struct occ {
+	struct device *dev;
+	void *bus;
+	struct occ_bus_ops bus_ops;
+	struct occ_ops ops;
+	struct occ_config config;
+	unsigned long update_interval;
+	unsigned long last_updated;
+	struct mutex update_lock;
+	struct occ_response response;
+	bool valid;
+};
+
+static void deinit_occ_resp_buf(struct occ_response *resp)
+{
+	int i;
+
+	if (!resp)
+		return;
+
+	if (!resp->data.blocks)
+		return;
+
+	for (i = 0; i < resp->header.sensor_block_num; ++i)
+		kfree(resp->data.blocks[i].sensors);
+
+	kfree(resp->data.blocks);
+
+	memset(resp, 0, sizeof(struct occ_response));
+
+	for (i = 0; i < MAX_OCC_SENSOR_TYPE; ++i)
+		resp->data.sensor_block_id[i] = -1;
+}
+
+static void *occ_get_sensor_by_type(struct occ_response *resp,
+				    enum sensor_type t)
+{
+	if (!resp->data.blocks)
+		return NULL;
+
+	if (resp->data.sensor_block_id[t] == -1)
+		return NULL;
+
+	return resp->data.blocks[resp->data.sensor_block_id[t]].sensors;
+}
+
+static int occ_check_sensor(struct occ *driver, u8 sensor_length,
+			    u8 sensor_num, enum sensor_type t, int block)
+{
+	void *sensor;
+	int type_block_id;
+	struct occ_response *resp = &driver->response;
+
+	sensor = occ_get_sensor_by_type(resp, t);
+
+	/* empty sensor block, release older sensor data */
+	if (sensor_num == 0 || sensor_length == 0) {
+		kfree(sensor);
+		dev_err(driver->dev, "no sensor blocks available\n");
+		return -ENODATA;
+	}
+
+	type_block_id = resp->data.sensor_block_id[t];
+	if (!sensor || sensor_num !=
+	    resp->data.blocks[type_block_id].header.sensor_num) {
+		kfree(sensor);
+		resp->data.blocks[block].sensors =
+			driver->ops.alloc_sensor(t, sensor_num);
+		if (!resp->data.blocks[block].sensors)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int parse_occ_response(struct occ *driver, u8 *data,
+			      struct occ_response *resp)
+{
+	int b;
+	int s;
+	int rc;
+	int offset = SENSOR_BLOCK_OFFSET;
+	int sensor_type;
+	u8 sensor_block_num;
+	char sensor_type_string[5] = { 0 };
+	struct sensor_data_block_header *block;
+	struct device *dev = driver->dev;
+
+	/* check if the data is valid */
+	if (strncmp(&data[SENSOR_STR_OFFSET], "SENSOR", 6) != 0) {
+		dev_err(dev, "no SENSOR string in response\n");
+		rc = -ENODATA;
+		goto err;
+	}
+
+	sensor_block_num = data[SENSOR_BLOCK_NUM_OFFSET];
+	if (sensor_block_num == 0) {
+		dev_err(dev, "no sensor blocks available\n");
+		rc = -ENODATA;
+		goto err;
+	}
+
+	/* if number of sensor block has changed, re-malloc */
+	if (sensor_block_num != resp->header.sensor_block_num) {
+		deinit_occ_resp_buf(resp);
+		resp->data.blocks = kcalloc(sensor_block_num,
+					    sizeof(struct sensor_data_block),
+					    GFP_KERNEL);
+		if (!resp->data.blocks)
+			return -ENOMEM;
+	}
+
+	memcpy(&resp->header, &data[RESP_HEADER_OFFSET],
+	       sizeof(struct occ_poll_header));
+	resp->header.error_log_addr_start =
+		be32_to_cpu(resp->header.error_log_addr_start);
+	resp->header.error_log_length =
+		be16_to_cpu(resp->header.error_log_length);
+
+	dev_dbg(dev, "Reading %d sensor blocks\n",
+		resp->header.sensor_block_num);
+	for (b = 0; b < sensor_block_num; b++) {
+		block = (struct sensor_data_block_header *)&data[offset];
+		/* copy to a null terminated string */
+		strncpy(sensor_type_string, block->sensor_type, 4);
+		offset += 8;
+
+		dev_dbg(dev, "sensor block[%d]: type: %s, sensor_num: %d\n", b,
+			sensor_type_string, block->sensor_num);
+
+		if (strncmp(block->sensor_type, "FREQ", 4) == 0)
+			sensor_type = FREQ;
+		else if (strncmp(block->sensor_type, "TEMP", 4) == 0)
+			sensor_type = TEMP;
+		else if (strncmp(block->sensor_type, "POWR", 4) == 0)
+			sensor_type = POWER;
+		else if (strncmp(block->sensor_type, "CAPS", 4) == 0)
+			sensor_type = CAPS;
+		else {
+			dev_err(dev, "sensor type not supported %s\n",
+				sensor_type_string);
+			continue;
+		}
+
+		rc = occ_check_sensor(driver, block->sensor_length,
+				      block->sensor_num, sensor_type, b);
+		if (rc == -ENOMEM)
+			goto err;
+		else if (rc)
+			continue;
+
+		resp->data.sensor_block_id[sensor_type] = b;
+		for (s = 0; s < block->sensor_num; s++) {
+			driver->ops.parse_sensor(data,
+						 resp->data.blocks[b].sensors,
+						 sensor_type, offset, s);
+			offset += block->sensor_length;
+		}
+
+		/* copy block data over to response pointer */
+		resp->data.blocks[b].header = *block;
+	}
+
+	return 0;
+err:
+	deinit_occ_resp_buf(resp);
+	return rc;
+}
+
+static u8 occ_send_cmd(struct occ *driver, u8 seq, u8 type, u16 length,
+		       const u8 *data, u8 *resp)
+{
+	u32 cmd1, cmd2;
+	u16 checksum = 0;
+	u16 length_le = cpu_to_le16(length);
+	bool retry = 0;
+	int i, rc, tries = 0;
+
+	cmd1 = (seq << 24) | (type << 16) | length_le;
+	memcpy(&cmd2, data, length);
+	cmd2 <<= ((4 - length) * 8);
+
+	/* checksum: sum of every bytes of cmd1, cmd2 */
+	for (i = 0; i < 4; i++) {
+		checksum += (cmd1 >> (i * 8)) & 0xFF;
+		checksum += (cmd2 >> (i * 8)) & 0xFF;
+	}
+
+	cmd2 |= checksum << ((2 - length) * 8);
+
+	/* Init OCB */
+	rc = driver->bus_ops.putscom(driver->bus, OCB_STATUS_CONTROL_OR,
+				     OCB_OR_INIT0, OCB_OR_INIT1);
+	if (rc)
+		goto err;
+
+	rc = driver->bus_ops.putscom(driver->bus, OCB_STATUS_CONTROL_AND,
+				     OCB_AND_INIT0, OCB_AND_INIT1);
+	if (rc)
+		goto err;
+
+	/* Send command, 2nd half of the 64-bit addr is unused (write 0) */
+	rc = driver->bus_ops.putscom(driver->bus, OCB_ADDRESS,
+				     driver->config.command_addr, 0);
+	if (rc)
+		goto err;
+
+	rc = driver->bus_ops.putscom(driver->bus, OCB_DATA, cmd1, cmd2);
+	if (rc)
+		goto err;
+
+	/* Trigger attention */
+	rc = driver->bus_ops.putscom(driver->bus, ATTN_DATA, ATTN0, ATTN1);
+	if (rc)
+		goto err;
+
+	/* Get response data */
+	rc = driver->bus_ops.putscom(driver->bus, OCB_ADDRESS,
+				     driver->config.response_addr, 0);
+	if (rc)
+		goto err;
+
+	do {
+		if (retry) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(msecs_to_jiffies(CMD_IN_PRG_INT_MS));
+		}
+
+		rc = driver->bus_ops.getscom(driver->bus, OCB_DATA,
+					     (u64 *)resp);
+		if (rc)
+			goto err;
+
+		/* retry if we get "command in progress" return status */
+		retry = (resp[RESP_RETURN_STATUS] == RESP_RETURN_CMD_IN_PRG) &&
+			(tries++ < CMD_IN_PRG_RETRIES);
+	} while (retry);
+
+	switch (resp[RESP_RETURN_STATUS]) {
+	case RESP_RETURN_CMD_IN_PRG:
+		rc = -EALREADY;
+		break;
+	case RESP_RETURN_SUCCESS:
+		rc = 0;
+		break;
+	case RESP_RETURN_CMD_INVAL:
+	case RESP_RETURN_CMD_LEN:
+	case RESP_RETURN_DATA_INVAL:
+	case RESP_RETURN_CHKSUM:
+		rc = -EINVAL;
+		break;
+	case RESP_RETURN_OCC_ERR:
+		rc = -EREMOTE;
+		break;
+	default:
+		rc = -EFAULT;
+	}
+
+	return rc;
+
+err:
+	dev_err(driver->dev, "scom op failed rc:%d\n", rc);
+	return rc;
+}
+
+static int occ_get_all(struct occ *driver)
+{
+	int i = 0, rc;
+	u8 *occ_data;
+	u16 num_bytes;
+	const u8 poll_cmd_data = OCC_POLL_STAT_SENSOR;
+	struct device *dev = driver->dev;
+	struct occ_response *resp = &driver->response;
+
+	occ_data = devm_kzalloc(dev, OCC_DATA_MAX, GFP_KERNEL);
+	if (!occ_data)
+		return -ENOMEM;
+
+	rc = occ_send_cmd(driver, 0, OCC_POLL, 1, &poll_cmd_data, occ_data);
+	if (rc) {
+		dev_err(dev, "OCC poll failed: %d\n", rc);
+		goto out;
+	}
+
+	num_bytes = get_unaligned((u16 *)&occ_data[RESP_DATA_LENGTH]);
+	num_bytes = be16_to_cpu(num_bytes);
+	dev_dbg(dev, "OCC data length: %d\n", num_bytes);
+
+	if (num_bytes > OCC_DATA_MAX) {
+		dev_err(dev, "OCC data length must be < 4KB\n");
+		rc = -EINVAL;
+		goto out;
+	}
+
+	if (num_bytes <= 0) {
+		dev_err(dev, "OCC data length is zero\n");
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* read remaining data */
+	for (i = 8; i < num_bytes + 8; i += 8) {
+		rc = driver->bus_ops.getscom(driver->bus, OCB_DATA,
+					     (u64 *)&occ_data[i]);
+		if (rc) {
+			dev_err(dev, "scom op failed rc:%d\n", rc);
+			goto out;
+		}
+	}
+
+	/* don't need more sanity checks; buffer is alloc'd for max response
+	 * size so we just check for valid data in parse_occ_response
+	 */
+	rc = parse_occ_response(driver, occ_data, resp);
+
+out:
+	devm_kfree(dev, occ_data);
+	return rc;
+}
+
+int occ_update_device(struct occ *driver)
+{
+	int rc = 0;
+
+	mutex_lock(&driver->update_lock);
+
+	if (time_after(jiffies, driver->last_updated + driver->update_interval)
+	    || !driver->valid) {
+		driver->valid = 1;
+
+		rc = occ_get_all(driver);
+		if (rc)
+			driver->valid = 0;
+
+		driver->last_updated = jiffies;
+	}
+
+	mutex_unlock(&driver->update_lock);
+
+	return rc;
+}
+EXPORT_SYMBOL(occ_update_device);
+
+void *occ_get_sensor(struct occ *driver, int sensor_type)
+{
+	int rc;
+
+	/* occ_update_device locks the update lock */
+	rc = occ_update_device(driver);
+	if (rc) {
+		dev_err(driver->dev, "cannot get occ sensor data: %d\n",
+			rc);
+		return NULL;
+	}
+
+	return occ_get_sensor_by_type(&driver->response, sensor_type);
+}
+EXPORT_SYMBOL(occ_get_sensor);
+
+int occ_get_sensor_value(struct occ *occ, int sensor_type, int sensor_num,
+			 u32 hwmon, long *val)
+{
+	return occ->ops.get_sensor(occ, sensor_type, sensor_num, hwmon, val);
+}
+EXPORT_SYMBOL(occ_get_sensor_value);
+
+void occ_get_response_blocks(struct occ *occ, struct occ_blocks **blocks)
+{
+	*blocks = &occ->response.data;
+}
+EXPORT_SYMBOL(occ_get_response_blocks);
+
+void occ_set_update_interval(struct occ *occ, unsigned long interval)
+{
+	occ->update_interval = msecs_to_jiffies(interval);
+}
+EXPORT_SYMBOL(occ_set_update_interval);
+
+int occ_set_user_powercap(struct occ *occ, u16 cap)
+{
+	u8 resp[8];
+
+	cap = cpu_to_be16(cap);
+
+	return occ_send_cmd(occ, 0, OCC_SET_USER_POWR_CAP, 2, (const u8 *)&cap,
+			    resp);
+}
+EXPORT_SYMBOL(occ_set_user_powercap);
+
+struct occ *occ_start(struct device *dev, void *bus,
+		      struct occ_bus_ops *bus_ops, const struct occ_ops *ops,
+		      const struct occ_config *config)
+{
+	struct occ *driver = devm_kzalloc(dev, sizeof(struct occ), GFP_KERNEL);
+
+	if (!driver)
+		return ERR_PTR(-ENOMEM);
+
+	driver->dev = dev;
+	driver->bus = bus;
+	driver->bus_ops = *bus_ops;
+	driver->ops = *ops;
+	driver->config = *config;
+
+	driver->update_interval = HZ;
+	mutex_init(&driver->update_lock);
+
+	return driver;
+}
+EXPORT_SYMBOL(occ_start);
+
+int occ_stop(struct occ *occ)
+{
+	devm_kfree(occ->dev, occ);
+
+	return 0;
+}
+EXPORT_SYMBOL(occ_stop);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("OCC hwmon core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/occ/occ.h b/drivers/hwmon/occ/occ.h
new file mode 100644
index 0000000..be869bc
--- /dev/null
+++ b/drivers/hwmon/occ/occ.h
@@ -0,0 +1,83 @@
+/*
+ * occ.h - hwmon OCC driver
+ *
+ * This file contains data structures and function prototypes for common access
+ * between different bus protocols and host systems.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OCC_H__
+#define __OCC_H__
+
+#include "scom.h"
+
+struct device;
+struct occ;
+
+/* sensor_data_block_header
+ * structure to match the raw occ sensor block header
+ */
+struct sensor_data_block_header {
+	u8 sensor_type[4];
+	u8 reserved0;
+	u8 sensor_format;
+	u8 sensor_length;
+	u8 sensor_num;
+} __attribute__((packed, aligned(4)));
+
+struct sensor_data_block {
+	struct sensor_data_block_header header;
+	void *sensors;
+};
+
+enum sensor_type {
+	FREQ = 0,
+	TEMP,
+	POWER,
+	CAPS,
+	MAX_OCC_SENSOR_TYPE
+};
+
+struct occ_ops {
+	void (*parse_sensor)(u8 *data, void *sensor, int sensor_type, int off,
+			     int snum);
+	void *(*alloc_sensor)(int sensor_type, int num_sensors);
+	int (*get_sensor)(struct occ *driver, int sensor_type, int sensor_num,
+			  u32 hwmon, long *val);
+};
+
+struct occ_config {
+	u32 command_addr;
+	u32 response_addr;
+};
+
+struct occ_blocks {
+	int sensor_block_id[MAX_OCC_SENSOR_TYPE];
+	struct sensor_data_block *blocks;
+};
+
+struct occ *occ_start(struct device *dev, void *bus,
+		      struct occ_bus_ops *bus_ops, const struct occ_ops *ops,
+		      const struct occ_config *config);
+int occ_stop(struct occ *occ);
+
+void *occ_get_sensor(struct occ *occ, int sensor_type);
+int occ_get_sensor_value(struct occ *occ, int sensor_type, int sensor_num,
+			 u32 hwmon, long *val);
+void occ_get_response_blocks(struct occ *occ, struct occ_blocks **blocks);
+int occ_update_device(struct occ *driver);
+void occ_set_update_interval(struct occ *occ, unsigned long interval);
+int occ_set_user_powercap(struct occ *occ, u16 cap);
+
+#endif /* __OCC_H__ */
diff --git a/drivers/hwmon/occ/scom.h b/drivers/hwmon/occ/scom.h
new file mode 100644
index 0000000..c1da645
--- /dev/null
+++ b/drivers/hwmon/occ/scom.h
@@ -0,0 +1,47 @@
+/*
+ * scom.h - hwmon OCC driver
+ *
+ * This file contains data structures for scom operations to the OCC
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SCOM_H__
+#define __SCOM_H__
+
+/*
+ * occ_bus_ops - represent the low-level transfer methods to communicate with
+ * the OCC.
+ *
+ * getscom - OCC scom read
+ * @bus: handle to slave device
+ * @address: address
+ * @data: where to store data read from slave; buffer size must be at least
+ * eight bytes.
+ *
+ * Returns 0 on success or a negative errno on error
+ *
+ * putscom - OCC scom write
+ * @bus: handle to slave device
+ * @address: address
+ * @data0: first data byte to write
+ * @data1: second data byte to write
+ *
+ * Returns 0 on success or a negative errno on error
+ */
+struct occ_bus_ops {
+	int (*getscom)(void *bus, u32 address, u64 *data);
+	int (*putscom)(void *bus, u32 address, u32 data0, u32 data1);
+};
+
+#endif /* __SCOM_H__ */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1556804 — [PATCH linux v2 4/6] hwmon: occ: Add callbacks for parsing P8 OCC datastructures

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 4/6] hwmon: occ: Add callbacks for parsing P8 OCC datastructures
Message-ID<sYvF8-1NE-25@gated-at.bofh.it>
In reply to#1556801
From: "Edward A. James" <eajames@us.ibm.com>

Add functions to parse the data structures that are specific to the OCC on
the POWER8 processor. These are the sensor data structures, including
temperature, frequency, power, and "caps."

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 Documentation/hwmon/occ    |   9 ++
 drivers/hwmon/occ/occ_p8.c | 254 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/hwmon/occ/occ_p8.h |  31 ++++++
 3 files changed, 294 insertions(+)
 create mode 100644 drivers/hwmon/occ/occ_p8.c
 create mode 100644 drivers/hwmon/occ/occ_p8.h

diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ
index d0bdf06..143951e 100644
--- a/Documentation/hwmon/occ
+++ b/Documentation/hwmon/occ
@@ -25,6 +25,15 @@ Currently, all versions of the OCC support four types of sensor data: power,
 temperature, frequency, and "caps," which indicate limits and thresholds used
 internally on the OCC.
 
+The format for the POWER8 OCC sensor data can be found in the P8 OCC
+specification:
+github.com/open-power/docs/blob/master/occ/OCC_OpenPwr_FW_Interfaces.pdf
+This document provides the details of the OCC sensors: power, frequency,
+temperature, and caps. These sensor formats are specific to the POWER8 OCC. A
+number of data structures, such as command format, response headers, and the
+like, are also defined in this specification, and are common to both POWER8 and
+POWER9 OCCs.
+
 sysfs Entries
 -------------
 
diff --git a/drivers/hwmon/occ/occ_p8.c b/drivers/hwmon/occ/occ_p8.c
new file mode 100644
index 0000000..6673da2
--- /dev/null
+++ b/drivers/hwmon/occ/occ_p8.c
@@ -0,0 +1,254 @@
+/*
+ * occ_p8.c - OCC hwmon driver
+ *
+ * This file contains the Power8-specific methods and data structures for
+ * the OCC hwmon driver.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/unaligned.h>
+#include <linux/hwmon.h>
+
+#include "occ.h"
+#include "occ_p8.h"
+
+/* P8 OCC sensor data format */
+struct p8_occ_sensor {
+	u16 sensor_id;
+	u16 value;
+};
+
+struct p8_power_sensor {
+	u16 sensor_id;
+	u32 update_tag;
+	u32 accumulator;
+	u16 value;
+};
+
+struct p8_caps_sensor {
+	u16 curr_powercap;
+	u16 curr_powerreading;
+	u16 norm_powercap;
+	u16 max_powercap;
+	u16 min_powercap;
+	u16 user_powerlimit;
+};
+
+static const u32 p8_sensor_hwmon_configs[MAX_OCC_SENSOR_TYPE] = {
+	HWMON_I_INPUT | HWMON_I_LABEL,	/* freq: value | label */
+	HWMON_T_INPUT | HWMON_T_LABEL,	/* temp: value | label */
+	/* power: value | label | accumulator | update_tag */
+	HWMON_P_INPUT | HWMON_P_LABEL | HWMON_P_AVERAGE |
+		HWMON_P_AVERAGE_INTERVAL,
+	/* caps: curr | max | min | norm | user */
+	HWMON_P_CAP | HWMON_P_CAP_MAX | HWMON_P_CAP_MIN | HWMON_P_MAX |
+		HWMON_P_ALARM,
+};
+
+void p8_parse_sensor(u8 *data, void *sensor, int sensor_type, int off,
+		     int snum)
+{
+	switch (sensor_type) {
+	case FREQ:
+	case TEMP:
+	{
+		struct p8_occ_sensor *os =
+			&(((struct p8_occ_sensor *)sensor)[snum]);
+
+		os->sensor_id = be16_to_cpu(get_unaligned((u16 *)&data[off]));
+		os->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 2]));
+	}
+		break;
+	case POWER:
+	{
+		struct p8_power_sensor *ps =
+			&(((struct p8_power_sensor *)sensor)[snum]);
+
+		ps->sensor_id = be16_to_cpu(get_unaligned((u16 *)&data[off]));
+		ps->update_tag =
+			be32_to_cpu(get_unaligned((u32 *)&data[off + 2]));
+		ps->accumulator =
+			be32_to_cpu(get_unaligned((u32 *)&data[off + 6]));
+		ps->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 10]));
+	}
+		break;
+	case CAPS:
+	{
+		struct p8_caps_sensor *cs =
+			&(((struct p8_caps_sensor *)sensor)[snum]);
+
+		cs->curr_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off]));
+		cs->curr_powerreading =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 2]));
+		cs->norm_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 4]));
+		cs->max_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 6]));
+		cs->min_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 8]));
+		cs->user_powerlimit =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 10]));
+	}
+		break;
+	};
+}
+
+void *p8_alloc_sensor(int sensor_type, int num_sensors)
+{
+	switch (sensor_type) {
+	case FREQ:
+	case TEMP:
+		return kcalloc(num_sensors, sizeof(struct p8_occ_sensor),
+			       GFP_KERNEL);
+	case POWER:
+		return kcalloc(num_sensors, sizeof(struct p8_power_sensor),
+			       GFP_KERNEL);
+	case CAPS:
+		return kcalloc(num_sensors, sizeof(struct p8_caps_sensor),
+			       GFP_KERNEL);
+	default:
+		return NULL;
+	}
+}
+
+int p8_get_sensor(struct occ *driver, int sensor_type, int sensor_num,
+		  u32 hwmon, long *val)
+{
+	int rc = 0;
+	void *sensor;
+
+	if (sensor_type == POWER) {
+		if (hwmon == hwmon_power_cap || hwmon == hwmon_power_cap_max ||
+		    hwmon == hwmon_power_cap_min || hwmon == hwmon_power_max ||
+		    hwmon == hwmon_power_alarm)
+			sensor_type = CAPS;
+	}
+
+	sensor = occ_get_sensor(driver, sensor_type);
+	if (!sensor)
+		return -ENODEV;
+
+	switch (sensor_type) {
+	case FREQ:
+	case TEMP:
+	{
+		struct p8_occ_sensor *os =
+			&(((struct p8_occ_sensor *)sensor)[sensor_num]);
+
+		if (hwmon == hwmon_in_input || hwmon == hwmon_temp_input)
+			*val = os->value;
+		else if (hwmon == hwmon_in_label || hwmon == hwmon_temp_label)
+			*val = os->sensor_id;
+		else
+			rc = -EOPNOTSUPP;
+	}
+		break;
+	case POWER:
+	{
+		struct p8_power_sensor *ps =
+			&(((struct p8_power_sensor *)sensor)[sensor_num]);
+
+		switch (hwmon) {
+		case hwmon_power_input:
+			*val = ps->value;
+			break;
+		case hwmon_power_label:
+			*val = ps->sensor_id;
+			break;
+		case hwmon_power_average:
+			*val = ps->accumulator;
+			break;
+		case hwmon_power_average_interval:
+			*val = ps->update_tag;
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	case CAPS:
+	{
+		struct p8_caps_sensor *cs =
+			&(((struct p8_caps_sensor *)sensor)[sensor_num]);
+
+		switch (hwmon) {
+		case hwmon_power_cap:
+			*val = cs->curr_powercap;
+			break;
+		case hwmon_power_cap_max:
+			*val = cs->max_powercap;
+			break;
+		case hwmon_power_cap_min:
+			*val = cs->min_powercap;
+			break;
+		case hwmon_power_max:
+			*val = cs->norm_powercap;
+			break;
+		case hwmon_power_alarm:
+			*val = cs->user_powerlimit;
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+static const struct occ_ops p8_ops = {
+	.parse_sensor = p8_parse_sensor,
+	.alloc_sensor = p8_alloc_sensor,
+	.get_sensor = p8_get_sensor,
+};
+
+static const struct occ_config p8_config = {
+	.command_addr = 0xFFFF6000,
+	.response_addr = 0xFFFF7000,
+};
+
+const u32 *p8_get_sensor_hwmon_configs()
+{
+	return p8_sensor_hwmon_configs;
+}
+EXPORT_SYMBOL(p8_get_sensor_hwmon_configs);
+
+struct occ *p8_occ_start(struct device *dev, void *bus,
+			 struct occ_bus_ops *bus_ops)
+{
+	return occ_start(dev, bus, bus_ops, &p8_ops, &p8_config);
+}
+EXPORT_SYMBOL(p8_occ_start);
+
+int p8_occ_stop(struct occ *occ)
+{
+	return occ_stop(occ);
+}
+EXPORT_SYMBOL(p8_occ_stop);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("P8 OCC sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/occ/occ_p8.h b/drivers/hwmon/occ/occ_p8.h
new file mode 100644
index 0000000..54ce907
--- /dev/null
+++ b/drivers/hwmon/occ/occ_p8.h
@@ -0,0 +1,31 @@
+/*
+ * occ_p8.h - OCC hwmon driver
+ *
+ * This file contains Power8-specific function prototypes
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OCC_P8_H__
+#define __OCC_P8_H__
+
+#include "scom.h"
+
+struct device;
+
+const u32 *p8_get_sensor_hwmon_configs(void);
+struct occ *p8_occ_start(struct device *dev, void *bus,
+			 struct occ_bus_ops *bus_ops);
+int p8_occ_stop(struct occ *occ);
+
+#endif /* __OCC_P8_H__ */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1556805 — [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
Message-ID<sYvF8-1NE-31@gated-at.bofh.it>
In reply to#1556801
From: "Edward A. James" <eajames@us.ibm.com>

Add code to tie the hwmon sysfs code and the POWER8 OCC code together, as
well as probe the entire driver from the I2C bus. I2C is the communication
method between the BMC and the P8 OCC.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 Documentation/devicetree/bindings/hwmon/occ.txt |  13 +++
 drivers/hwmon/occ/Kconfig                       |  14 +++
 drivers/hwmon/occ/Makefile                      |   1 +
 drivers/hwmon/occ/p8_occ_i2c.c                  | 123 ++++++++++++++++++++++++
 4 files changed, 151 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
 create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c

diff --git a/Documentation/devicetree/bindings/hwmon/occ.txt b/Documentation/devicetree/bindings/hwmon/occ.txt
new file mode 100644
index 0000000..b0d2b36
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/occ.txt
@@ -0,0 +1,13 @@
+HWMON I2C driver for IBM POWER CPU OCC (On Chip Controller)
+
+Required properties:
+ - compatible: must be "ibm,p8-occ-i2c"
+ - reg: physical address
+
+Example:
+i2c3: i2c-bus@100 {
+	occ@50 {
+		compatible = "ibm,p8-occ-i2c";
+		reg = <0x50>;
+	};
+};
diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
index cdb64a7..3a5188f 100644
--- a/drivers/hwmon/occ/Kconfig
+++ b/drivers/hwmon/occ/Kconfig
@@ -13,3 +13,17 @@ menuconfig SENSORS_PPC_OCC
 
 	  This driver can also be built as a module. If so, the module
 	  will be called occ.
+
+if SENSORS_PPC_OCC
+
+config SENSORS_PPC_OCC_P8_I2C
+	tristate "POWER8 OCC hwmon support"
+	depends on I2C
+	help
+	 Provide a hwmon sysfs interface for the POWER8 On-Chip Controller,
+	 exposing temperature, frequency and power measurements.
+
+	 This driver can also be built as a module. If so, the module will be
+	 called p8-occ-i2c.
+
+endif
diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
index a6881f9..9294b58 100644
--- a/drivers/hwmon/occ/Makefile
+++ b/drivers/hwmon/occ/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o occ_sysfs.o
+obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o occ_p8.o p8_occ_i2c.o
diff --git a/drivers/hwmon/occ/p8_occ_i2c.c b/drivers/hwmon/occ/p8_occ_i2c.c
new file mode 100644
index 0000000..4515c68
--- /dev/null
+++ b/drivers/hwmon/occ/p8_occ_i2c.c
@@ -0,0 +1,123 @@
+/*
+ * p8_occ_i2c.c - hwmon OCC driver
+ *
+ * This file contains the i2c layer for accessing the P8 OCC over i2c bus.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "scom.h"
+#include "occ_scom_i2c.h"
+#include "occ_p8.h"
+#include "occ_sysfs.h"
+
+#define P8_OCC_I2C_NAME	"p8-occ-i2c"
+
+int p8_i2c_getscom(void *bus, u32 address, u64 *data)
+{
+	/* P8 i2c slave requires address to be shifted by 1 */
+	address = address << 1;
+
+	return occ_i2c_getscom(bus, address, data);
+}
+
+int p8_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1)
+{
+	/* P8 i2c slave requires address to be shifted by 1 */
+	address = address << 1;
+
+	return occ_i2c_putscom(bus, address, data0, data1);
+}
+
+static struct occ_bus_ops p8_bus_ops = {
+	.getscom = p8_i2c_getscom,
+	.putscom = p8_i2c_putscom,
+};
+
+static int p8_occ_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct occ *occ;
+	struct occ_sysfs *hwmon;
+	const u32 *sensor_hwmon_configs = p8_get_sensor_hwmon_configs();
+
+	occ = p8_occ_start(&client->dev, client, &p8_bus_ops);
+	if (IS_ERR(occ))
+		return PTR_ERR(occ);
+
+	hwmon = occ_sysfs_start(&client->dev, occ, sensor_hwmon_configs,
+				P8_OCC_I2C_NAME);
+	if (IS_ERR(hwmon))
+		return PTR_ERR(hwmon);
+
+	i2c_set_clientdata(client, occ);
+
+	return 0;
+}
+
+static int p8_occ_remove(struct i2c_client *client)
+{
+	struct occ *occ = i2c_get_clientdata(client);
+
+	return p8_occ_stop(occ);
+}
+
+/* used by old-style board info. */
+static const struct i2c_device_id occ_ids[] = {
+	{ P8_OCC_I2C_NAME, 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, occ_ids);
+
+/* used by device table */
+static const struct of_device_id occ_of_match[] = {
+	{ .compatible = "ibm,p8-occ-i2c" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, occ_of_match);
+
+/*
+ * i2c-core uses i2c-detect() to detect device in below address list.
+ * If exists, address will be assigned to client.
+ * It is also possible to read address from device table.
+ */
+static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
+
+static struct i2c_driver p8_occ_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = P8_OCC_I2C_NAME,
+		.pm = NULL,
+		.of_match_table = occ_of_match,
+	},
+	.probe = p8_occ_probe,
+	.remove = p8_occ_remove,
+	.id_table = occ_ids,
+	.address_list = normal_i2c,
+};
+
+module_i2c_driver(p8_occ_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("BMC P8 OCC hwmon driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1559318 — Re: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC

FromGuenter Roeck <linux@roeck-us.net>
Date2017-01-15 19:20 +0100
SubjectRe: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
Message-ID<sZXzk-5L2-9@gated-at.bofh.it>
In reply to#1556805
On 01/11/2017 10:10 AM, eajames.ibm@gmail.com wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Add code to tie the hwmon sysfs code and the POWER8 OCC code together, as
> well as probe the entire driver from the I2C bus. I2C is the communication
> method between the BMC and the P8 OCC.
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>  Documentation/devicetree/bindings/hwmon/occ.txt |  13 +++
>  drivers/hwmon/occ/Kconfig                       |  14 +++
>  drivers/hwmon/occ/Makefile                      |   1 +
>  drivers/hwmon/occ/p8_occ_i2c.c                  | 123 ++++++++++++++++++++++++
>  4 files changed, 151 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
>  create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c
>
> diff --git a/Documentation/devicetree/bindings/hwmon/occ.txt b/Documentation/devicetree/bindings/hwmon/occ.txt
> new file mode 100644
> index 0000000..b0d2b36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/occ.txt
> @@ -0,0 +1,13 @@
> +HWMON I2C driver for IBM POWER CPU OCC (On Chip Controller)
> +
> +Required properties:
> + - compatible: must be "ibm,p8-occ-i2c"
> + - reg: physical address
> +
> +Example:
> +i2c3: i2c-bus@100 {
> +	occ@50 {
> +		compatible = "ibm,p8-occ-i2c";
> +		reg = <0x50>;
> +	};
> +};
> diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
> index cdb64a7..3a5188f 100644
> --- a/drivers/hwmon/occ/Kconfig
> +++ b/drivers/hwmon/occ/Kconfig
> @@ -13,3 +13,17 @@ menuconfig SENSORS_PPC_OCC
>
>  	  This driver can also be built as a module. If so, the module
>  	  will be called occ.
> +
> +if SENSORS_PPC_OCC
> +
> +config SENSORS_PPC_OCC_P8_I2C
> +	tristate "POWER8 OCC hwmon support"
> +	depends on I2C
> +	help
> +	 Provide a hwmon sysfs interface for the POWER8 On-Chip Controller,
> +	 exposing temperature, frequency and power measurements.
> +
> +	 This driver can also be built as a module. If so, the module will be
> +	 called p8-occ-i2c.
> +
> +endif
> diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
> index a6881f9..9294b58 100644
> --- a/drivers/hwmon/occ/Makefile
> +++ b/drivers/hwmon/occ/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o occ_sysfs.o
> +obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o occ_p8.o p8_occ_i2c.o
> diff --git a/drivers/hwmon/occ/p8_occ_i2c.c b/drivers/hwmon/occ/p8_occ_i2c.c
> new file mode 100644
> index 0000000..4515c68
> --- /dev/null
> +++ b/drivers/hwmon/occ/p8_occ_i2c.c
> @@ -0,0 +1,123 @@
> +/*
> + * p8_occ_i2c.c - hwmon OCC driver
> + *
> + * This file contains the i2c layer for accessing the P8 OCC over i2c bus.
> + *
> + * Copyright 2016 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>

For all patches: alphabetic order, please.

> +
> +#include "scom.h"
> +#include "occ_scom_i2c.h"
> +#include "occ_p8.h"
> +#include "occ_sysfs.h"
> +
> +#define P8_OCC_I2C_NAME	"p8-occ-i2c"
> +
> +int p8_i2c_getscom(void *bus, u32 address, u64 *data)
> +{
> +	/* P8 i2c slave requires address to be shifted by 1 */
> +	address = address << 1;
> +
> +	return occ_i2c_getscom(bus, address, data);
> +}
> +
> +int p8_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1)
> +{
> +	/* P8 i2c slave requires address to be shifted by 1 */
> +	address = address << 1;
> +
> +	return occ_i2c_putscom(bus, address, data0, data1);
> +}
> +
> +static struct occ_bus_ops p8_bus_ops = {
> +	.getscom = p8_i2c_getscom,
> +	.putscom = p8_i2c_putscom,
> +};
> +
> +static int p8_occ_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct occ *occ;
> +	struct occ_sysfs *hwmon;
> +	const u32 *sensor_hwmon_configs = p8_get_sensor_hwmon_configs();
> +
> +	occ = p8_occ_start(&client->dev, client, &p8_bus_ops);
> +	if (IS_ERR(occ))
> +		return PTR_ERR(occ);
> +
> +	hwmon = occ_sysfs_start(&client->dev, occ, sensor_hwmon_configs,
> +				P8_OCC_I2C_NAME);
> +	if (IS_ERR(hwmon))
> +		return PTR_ERR(hwmon);
> +
> +	i2c_set_clientdata(client, occ);

This maps to
	dev_set_drvdata(&client->dev, occ);
and code in occ_sysfs_start() does the same, writing a reference to the hwmon device.

> +
> +	return 0;
> +}
> +
> +static int p8_occ_remove(struct i2c_client *client)
> +{
> +	struct occ *occ = i2c_get_clientdata(client);
> +
> +	return p8_occ_stop(occ);
> +}
> +
> +/* used by old-style board info. */
> +static const struct i2c_device_id occ_ids[] = {
> +	{ P8_OCC_I2C_NAME, 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, occ_ids);
> +
> +/* used by device table */
> +static const struct of_device_id occ_of_match[] = {
> +	{ .compatible = "ibm,p8-occ-i2c" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, occ_of_match);
> +
> +/*
> + * i2c-core uses i2c-detect() to detect device in below address list.
> + * If exists, address will be assigned to client.
> + * It is also possible to read address from device table.
> + */
> +static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
> +
> +static struct i2c_driver p8_occ_driver = {
> +	.class = I2C_CLASS_HWMON,
> +	.driver = {
> +		.name = P8_OCC_I2C_NAME,
> +		.pm = NULL,
> +		.of_match_table = occ_of_match,
> +	},
> +	.probe = p8_occ_probe,
> +	.remove = p8_occ_remove,
> +	.id_table = occ_ids,
> +	.address_list = normal_i2c,
> +};
> +
> +module_i2c_driver(p8_occ_driver);
> +
> +MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
> +MODULE_DESCRIPTION("BMC P8 OCC hwmon driver");
> +MODULE_LICENSE("GPL");
>

[toc] | [prev] | [next] | [standalone]

#1559321 — Re: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC

FromGuenter Roeck <linux@roeck-us.net>
Date2017-01-15 19:40 +0100
SubjectRe: [PATCH linux v2 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
Message-ID<sZXSF-5R9-3@gated-at.bofh.it>
In reply to#1556805
On 01/11/2017 10:10 AM, eajames.ibm@gmail.com wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Add code to tie the hwmon sysfs code and the POWER8 OCC code together, as
> well as probe the entire driver from the I2C bus. I2C is the communication
> method between the BMC and the P8 OCC.
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>  Documentation/devicetree/bindings/hwmon/occ.txt |  13 +++
>  drivers/hwmon/occ/Kconfig                       |  14 +++
>  drivers/hwmon/occ/Makefile                      |   1 +
>  drivers/hwmon/occ/p8_occ_i2c.c                  | 123 ++++++++++++++++++++++++
>  4 files changed, 151 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
>  create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c
>
> diff --git a/Documentation/devicetree/bindings/hwmon/occ.txt b/Documentation/devicetree/bindings/hwmon/occ.txt
> new file mode 100644
> index 0000000..b0d2b36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/occ.txt
> @@ -0,0 +1,13 @@
> +HWMON I2C driver for IBM POWER CPU OCC (On Chip Controller)
> +
> +Required properties:
> + - compatible: must be "ibm,p8-occ-i2c"
> + - reg: physical address
> +
> +Example:
> +i2c3: i2c-bus@100 {
> +	occ@50 {
> +		compatible = "ibm,p8-occ-i2c";
> +		reg = <0x50>;
> +	};
> +};
> diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
> index cdb64a7..3a5188f 100644
> --- a/drivers/hwmon/occ/Kconfig
> +++ b/drivers/hwmon/occ/Kconfig
> @@ -13,3 +13,17 @@ menuconfig SENSORS_PPC_OCC
>
>  	  This driver can also be built as a module. If so, the module
>  	  will be called occ.
> +
> +if SENSORS_PPC_OCC
> +
> +config SENSORS_PPC_OCC_P8_I2C
> +	tristate "POWER8 OCC hwmon support"
> +	depends on I2C
> +	help
> +	 Provide a hwmon sysfs interface for the POWER8 On-Chip Controller,
> +	 exposing temperature, frequency and power measurements.
> +
> +	 This driver can also be built as a module. If so, the module will be
> +	 called p8-occ-i2c.
> +
> +endif
> diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
> index a6881f9..9294b58 100644
> --- a/drivers/hwmon/occ/Makefile
> +++ b/drivers/hwmon/occ/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o occ_sysfs.o
> +obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o occ_p8.o p8_occ_i2c.o
> diff --git a/drivers/hwmon/occ/p8_occ_i2c.c b/drivers/hwmon/occ/p8_occ_i2c.c
> new file mode 100644
> index 0000000..4515c68
> --- /dev/null
> +++ b/drivers/hwmon/occ/p8_occ_i2c.c
> @@ -0,0 +1,123 @@
> +/*
> + * p8_occ_i2c.c - hwmon OCC driver
> + *
> + * This file contains the i2c layer for accessing the P8 OCC over i2c bus.
> + *
> + * Copyright 2016 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +
> +#include "scom.h"
> +#include "occ_scom_i2c.h"
> +#include "occ_p8.h"
> +#include "occ_sysfs.h"
> +
> +#define P8_OCC_I2C_NAME	"p8-occ-i2c"
> +
> +int p8_i2c_getscom(void *bus, u32 address, u64 *data)
> +{
> +	/* P8 i2c slave requires address to be shifted by 1 */
> +	address = address << 1;
> +
> +	return occ_i2c_getscom(bus, address, data);
> +}
> +
> +int p8_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1)
> +{
> +	/* P8 i2c slave requires address to be shifted by 1 */
> +	address = address << 1;
> +
> +	return occ_i2c_putscom(bus, address, data0, data1);
> +}
> +
> +static struct occ_bus_ops p8_bus_ops = {
> +	.getscom = p8_i2c_getscom,
> +	.putscom = p8_i2c_putscom,
> +};
> +
> +static int p8_occ_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct occ *occ;
> +	struct occ_sysfs *hwmon;
> +	const u32 *sensor_hwmon_configs = p8_get_sensor_hwmon_configs();
> +
> +	occ = p8_occ_start(&client->dev, client, &p8_bus_ops);
> +	if (IS_ERR(occ))
> +		return PTR_ERR(occ);
> +
> +	hwmon = occ_sysfs_start(&client->dev, occ, sensor_hwmon_configs,
> +				P8_OCC_I2C_NAME);
> +	if (IS_ERR(hwmon))
> +		return PTR_ERR(hwmon);
> +
> +	i2c_set_clientdata(client, occ);
> +
You might do the set_clientdata() call before the registration, and use
return PTR_ERR_OR_ZERO(hwmon). You'll need to drop the call to dev_set_drvdata()
in occ_sysfs_start() for that to work.

> +	return 0;
> +}
> +
> +static int p8_occ_remove(struct i2c_client *client)
> +{
> +	struct occ *occ = i2c_get_clientdata(client);
> +
> +	return p8_occ_stop(occ);

That stops occ first, then removes the hwmon driver registration. It also leaves a hole:
if occ_sysfs_start() failed, occ_stop() won't be called.

But wait ... all occ_stop does is to call devm_kfree(), which is wrong, because it
should never be necessary to call it, but even more so since the data structure
is still in use after the call to p8_occ_stop(). Just drop that function.

> +}
> +
> +/* used by old-style board info. */
> +static const struct i2c_device_id occ_ids[] = {
> +	{ P8_OCC_I2C_NAME, 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, occ_ids);
> +
> +/* used by device table */
> +static const struct of_device_id occ_of_match[] = {
> +	{ .compatible = "ibm,p8-occ-i2c" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, occ_of_match);
> +
> +/*
> + * i2c-core uses i2c-detect() to detect device in below address list.
> + * If exists, address will be assigned to client.
> + * It is also possible to read address from device table.
> + */
> +static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
> +
... but only if there is a detect function, and trying to detect any chip
on the common eeprom addresses is not a good idea anyway (it would be really
easy to spoof). Please drop.

> +static struct i2c_driver p8_occ_driver = {
> +	.class = I2C_CLASS_HWMON,
> +	.driver = {
> +		.name = P8_OCC_I2C_NAME,
> +		.pm = NULL,
> +		.of_match_table = occ_of_match,
> +	},
> +	.probe = p8_occ_probe,
> +	.remove = p8_occ_remove,
> +	.id_table = occ_ids,
> +	.address_list = normal_i2c,
> +};
> +
> +module_i2c_driver(p8_occ_driver);
> +
> +MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
> +MODULE_DESCRIPTION("BMC P8 OCC hwmon driver");
> +MODULE_LICENSE("GPL");
>

[toc] | [prev] | [next] | [standalone]

#1556808 — [PATCH linux v2 6/6] hwmon: occ: Add callbacks for parsing P9 OCC datastructures

Fromeajames.ibm@gmail.com
Date2017-01-11 19:20 +0100
Subject[PATCH linux v2 6/6] hwmon: occ: Add callbacks for parsing P9 OCC datastructures
Message-ID<sYvF8-1NE-35@gated-at.bofh.it>
In reply to#1556801
From: "Edward A. James" <eajames@us.ibm.com>

Add functions to parse the data structures that are specific to the OCC on
the POWER9 processor. These are the sensor data structures, including
temperature, frequency, power, and "caps."

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 Documentation/hwmon/occ    |   3 +
 drivers/hwmon/occ/occ_p9.c | 314 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/hwmon/occ/occ_p9.h |  31 +++++
 3 files changed, 348 insertions(+)
 create mode 100644 drivers/hwmon/occ/occ_p9.c
 create mode 100644 drivers/hwmon/occ/occ_p9.h

diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ
index 143951e..6cea853 100644
--- a/Documentation/hwmon/occ
+++ b/Documentation/hwmon/occ
@@ -34,6 +34,9 @@ number of data structures, such as command format, response headers, and the
 like, are also defined in this specification, and are common to both POWER8 and
 POWER9 OCCs.
 
+There is currently no public P9 OCC specification, and the data structures
+defined in the POWER9 OCC driver are subject to change.
+
 sysfs Entries
 -------------
 
diff --git a/drivers/hwmon/occ/occ_p9.c b/drivers/hwmon/occ/occ_p9.c
new file mode 100644
index 0000000..8b351a0
--- /dev/null
+++ b/drivers/hwmon/occ/occ_p9.c
@@ -0,0 +1,314 @@
+/*
+ * occ_p9.c - OCC hwmon driver
+ *
+ * This file contains the Power9-specific methods and data structures for
+ * the OCC hwmon driver.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/unaligned.h>
+
+#include "occ.h"
+#include "occ_p9.h"
+
+/* P9 OCC sensor data format */
+struct p9_temp_sensor {
+	u32 sensor_id;
+	u8 fru_type;
+	u8 value;
+};
+
+struct p9_freq_sensor {
+	u32 sensor_id;
+	u16 value;
+};
+
+struct p9_power_sensor {
+	u32 sensor_id;
+	u8 function_id;
+	u8 apss_channel;
+	u16 reserved;
+	u32 update_tag;
+	u64 accumulator;
+	u16 value;
+};
+
+struct p9_caps_sensor {
+	u16 curr_powercap;
+	u16 curr_powerreading;
+	u16 norm_powercap;
+	u16 max_powercap;
+	u16 min_powercap;
+	u16 user_powerlimit;
+	u8 user_powerlimit_source;
+};
+
+static const u32 p9_sensor_hwmon_configs[MAX_OCC_SENSOR_TYPE] = {
+	HWMON_I_INPUT | HWMON_I_LABEL,	/* freq: value | label */
+	/* temp: value | label | fru_type */
+	HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_TYPE,
+	/* power: value | label | accum[0] | accum[1] | update_tag |
+	 *	 (function_id | (apss_channel << 8))
+	 */
+	HWMON_P_INPUT | HWMON_P_LABEL | HWMON_P_AVERAGE_MIN |
+		HWMON_P_AVERAGE_MAX | HWMON_P_AVERAGE_INTERVAL |
+		HWMON_P_RESET_HISTORY,
+	/* caps: curr | max | min | norm | user | source */
+	HWMON_P_CAP | HWMON_P_CAP_MAX | HWMON_P_CAP_MIN | HWMON_P_MAX |
+		HWMON_P_ALARM | HWMON_P_CAP_ALARM,
+};
+
+void p9_parse_sensor(u8 *data, void *sensor, int sensor_type, int off,
+		     int snum)
+{
+	switch (sensor_type) {
+	case FREQ:
+	{
+		struct p9_freq_sensor *fs =
+			&(((struct p9_freq_sensor *)sensor)[snum]);
+
+		fs->sensor_id = be32_to_cpu(get_unaligned((u32 *)&data[off]));
+		fs->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 4]));
+	}
+		break;
+	case TEMP:
+	{
+		struct p9_temp_sensor *ts =
+			&(((struct p9_temp_sensor *)sensor)[snum]);
+
+		ts->sensor_id = be32_to_cpu(get_unaligned((u32 *)&data[off]));
+		fs->fru_type = data[off + 4];
+		fs->value = data[off + 5];
+	}
+		break;
+	case POWER:
+	{
+		struct p9_power_sensor *ps =
+			&(((struct p9_power_sensor *)sensor)[snum]);
+
+		ps->sensor_id = be32_to_cpu(get_unaligned((u32 *)&data[off]));
+		ps->function_id = data[off + 4];
+		ps->apss_channel = data[off + 5];
+		ps->update_tag =
+			be32_to_cpu(get_unaligned((u32 *)&data[off + 8]));
+		ps->accumulator =
+			be64_to_cpu(get_unaligned((u64 *)&data[off + 12]));
+		ps->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 20]));
+	}
+		break;
+	case CAPS:
+	{
+		struct p9_caps_sensor *cs =
+			&(((struct p9_caps_sensor *)sensor)[snum]);
+
+		cs->curr_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off]));
+		cs->curr_powerreading =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 2]));
+		cs->norm_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 4]));
+		cs->max_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 6]));
+		cs->min_powercap =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 8]));
+		cs->user_powerlimit =
+			be16_to_cpu(get_unaligned((u16 *)&data[off + 10]));
+		cs->user_powerlimit_source = data[off + 12];
+	}
+		break;
+	};
+}
+
+void *p9_alloc_sensor(int sensor_type, int num_sensors)
+{
+	switch (sensor_type) {
+	case FREQ:
+		return kcalloc(num_sensors, sizeof(struct p9_freq_sensor),
+			       GFP_KERNEL);
+	case TEMP:
+		return kcalloc(num_sensors, sizeof(struct p9_temp_sensor),
+			       GFP_KERNEL);
+	case POWER:
+		return kcalloc(num_sensors, sizeof(struct p9_power_sensor),
+			       GFP_KERNEL);
+	case CAPS:
+		return kcalloc(num_sensors, sizeof(struct p9_caps_sensor),
+			       GFP_KERNEL);
+	default:
+		return NULL;
+	}
+}
+
+int p9_get_sensor(struct occ *driver, int sensor_type, int sensor_num,
+		  u32 hwmon, long *val)
+{
+	int rc = 0;
+	void *sensor;
+
+	if (sensor_type == POWER) {
+		if (hwmon == hwmon_power_cap || hwmon == hwmon_power_cap_max ||
+		    hwmon == hwmon_power_cap_min || hwmon == hwmon_power_max ||
+		    hwmon == hwmon_power_alarm ||
+		    hwmon == hwmon_power_cap_alarm)
+			sensor_type = CAPS;
+	}
+
+	sensor = occ_get_sensor(driver, sensor_type);
+	if (!sensor)
+		return -ENODEV;
+
+	switch (sensor_type) {
+	case FREQ:
+	{
+		struct p9_freq_sensor *fs =
+			&(((struct p9_freq_sensor *)sensor)[snum]);
+
+		switch (hwmon) {
+		case hwmon_in_input:
+			*val = fs->value;
+			break;
+		case hwmon_in_label:
+			*val = fs->sensor_id;
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	case TEMP:
+	{
+		struct p9_temp_sensor *ts =
+			&(((struct p9_temp_sensor *)sensor)[snum]);
+
+		switch (hwmon) {
+		case hwmon_temp_input:
+			*val = ts->value;
+			break;
+		case hwmon_temp_type:
+			*val = ts->fru_type;
+			break;
+		case hwmon_temp_label:
+			*val = ts->sensor_id;
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	case POWER:
+	{
+		struct p9_power_sensor *ps =
+			&(((struct p9_power_sensor *)sensor)[snum]);
+
+		switch (hwmon) {
+		case hwmon_power_input:
+			*val = ps->value;
+			break;
+		case hwmon_power_label:
+			*val = ps->sensor_id;
+			break;
+		case hwmon_power_average_min:
+			*val = ((u32 *)(&ps->accumulator))[0];
+			break;
+		case hwmon_power_average_max:
+			*val = ((u32 *)(&ps->accumulator))[1];
+			break;
+		case hwmon_power_average_interval:
+			*val = ps->update_tag;
+			break;
+		case hwmon_power_reset_history:
+			*val = ps->function_id | (ps->apss_channel << 8);
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	case CAPS:
+	{
+		struct p9_caps_sensor *cs =
+			&(((struct p9_caps_sensor *)sensor)[snum]);
+
+		switch (hwmon) {
+		case hwmon_power_cap:
+			*val = cs->curr_powercap;
+			break;
+		case hwmon_power_cap_max:
+			*val = cs->max_powercap;
+			break;
+		case hwmon_power_cap_min:
+			*val = cs->min_powercap;
+			break;
+		case hwmon_power_max:
+			*val = cs->norm_powercap;
+			break;
+		case hwmon_power_alarm:
+			*val = cs->user_powerlimit;
+			break;
+		case hwmon_power_cap_alarm:
+			*val = cs->user_powerlimit_source;
+			break;
+		default:
+			rc = -EOPNOTSUPP;
+		}
+	}
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+static const struct occ_ops p9_ops = {
+	.parse_sensor = p9_parse_sensor,
+	.alloc_sensor = p9_alloc_sensor,
+	.get_sensor = p9_get_sensor,
+};
+
+static const struct occ_config p9_config = {
+	.command_addr = 0xFFFBE000,
+	.response_addr = 0xFFFBF000,
+};
+
+const u32 *p9_get_sensor_hwmon_configs()
+{
+	return p9_sensor_hwmon_configs;
+}
+EXPORT_SYMBOL(p9_get_sensor_hwmon_configs);
+
+struct occ *p9_occ_start(struct device *dev, void *bus,
+			 struct occ_bus_ops *bus_ops)
+{
+	return occ_start(dev, bus, bus_ops, &p9_ops, &p9_config);
+}
+EXPORT_SYMBOL(p9_occ_start);
+
+int p9_occ_stop(struct occ *occ)
+{
+	return occ_stop(occ);
+}
+EXPORT_SYMBOL(p9_occ_stop);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("P9 OCC sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/occ/occ_p9.h b/drivers/hwmon/occ/occ_p9.h
new file mode 100644
index 0000000..b1c01d6
--- /dev/null
+++ b/drivers/hwmon/occ/occ_p9.h
@@ -0,0 +1,31 @@
+/*
+ * occ_p9.h - OCC hwmon driver
+ *
+ * This file contains Power9-specific function prototypes
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OCC_P9_H__
+#define __OCC_P9_H__
+
+#include "scom.h"
+
+struct device;
+
+const u32 *p9_get_sensor_hwmon_configs(void);
+struct occ *p9_occ_start(struct device *dev, void *bus,
+			 struct occ_bus_ops *bus_ops);
+int p9_occ_stop(struct occ *occ);
+
+#endif /* __OCC_P9_H__ */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1557259 — Re: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver

FromWolfram Sang <wsa@the-dreams.de>
Date2017-01-12 11:00 +0100
SubjectRe: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver
Message-ID<sYKkN-2oa-7@gated-at.bofh.it>
In reply to#1556801

[Multipart message — attachments visible in raw view] — view raw

> This patchset adds a hwmon driver to support the OCC (On-Chip Controller)
> on the IBM POWER8 and POWER9 processors, from a BMC (Baseboard Management
> Controller). The OCC is an embedded processor that provides real time
> power and thermal monitoring.

Please don't cc the I2C list for I2C client drivers unless you have a
specific question about the I2C framework. Same as you usually don't add
the PCI list for every PCI (client) card.

[toc] | [prev] | [next] | [standalone]

#1559322 — Re: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver

FromGuenter Roeck <linux@roeck-us.net>
Date2017-01-15 19:40 +0100
SubjectRe: [PATCH linux v2 0/6] drivers: hwmon: Add On-Chip Controller driver
Message-ID<sZXSF-5R9-7@gated-at.bofh.it>
In reply to#1556801
On 01/11/2017 10:10 AM, eajames.ibm@gmail.com wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> This patchset adds a hwmon driver to support the OCC (On-Chip Controller)
> on the IBM POWER8 and POWER9 processors, from a BMC (Baseboard Management
> Controller). The OCC is an embedded processor that provides real time
> power and thermal monitoring.
>
> The driver provides an interface on a BMC to poll OCC sensor data, set
> user power caps, and perform some basic OCC error handling. It interfaces
> with userspace through hwmon.
>
> The driver is currently functional only for the OCC on POWER8 chips.
> Communicating with the POWER9 OCC requries FSI support.
>

Overall looks pretty good. There is the 0day hiccup (was that solved ?) and
a few comments I made separately. It might make sense to add someone from IBM
as maintainer.

Thanks,
Guenter

> Edward A. James (6):
>   hwmon: Add core On-Chip Controller support for POWER CPUs
>   hwmon: occ: Add sysfs interface
>   hwmon: occ: Add I2C transport implementation for SCOM operations
>   hwmon: occ: Add callbacks for parsing P8 OCC datastructures
>   hwmon: occ: Add hwmon implementation for the P8 OCC
>   hwmon: occ: Add callbacks for parsing P9 OCC datastructures
>
>  Documentation/devicetree/bindings/hwmon/occ.txt |  13 +
>  Documentation/hwmon/occ                         | 114 +++++
>  drivers/hwmon/Kconfig                           |   2 +
>  drivers/hwmon/Makefile                          |   1 +
>  drivers/hwmon/occ/Kconfig                       |  29 ++
>  drivers/hwmon/occ/Makefile                      |   2 +
>  drivers/hwmon/occ/occ.c                         | 533 ++++++++++++++++++++++++
>  drivers/hwmon/occ/occ.h                         |  83 ++++
>  drivers/hwmon/occ/occ_p8.c                      | 254 +++++++++++
>  drivers/hwmon/occ/occ_p8.h                      |  31 ++
>  drivers/hwmon/occ/occ_p9.c                      | 314 ++++++++++++++
>  drivers/hwmon/occ/occ_p9.h                      |  31 ++
>  drivers/hwmon/occ/occ_scom_i2c.c                |  73 ++++
>  drivers/hwmon/occ/occ_scom_i2c.h                |  26 ++
>  drivers/hwmon/occ/occ_sysfs.c                   | 274 ++++++++++++
>  drivers/hwmon/occ/occ_sysfs.h                   |  44 ++
>  drivers/hwmon/occ/p8_occ_i2c.c                  | 123 ++++++
>  drivers/hwmon/occ/scom.h                        |  47 +++
>  18 files changed, 1994 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
>  create mode 100644 Documentation/hwmon/occ
>  create mode 100644 drivers/hwmon/occ/Kconfig
>  create mode 100644 drivers/hwmon/occ/Makefile
>  create mode 100644 drivers/hwmon/occ/occ.c
>  create mode 100644 drivers/hwmon/occ/occ.h
>  create mode 100644 drivers/hwmon/occ/occ_p8.c
>  create mode 100644 drivers/hwmon/occ/occ_p8.h
>  create mode 100644 drivers/hwmon/occ/occ_p9.c
>  create mode 100644 drivers/hwmon/occ/occ_p9.h
>  create mode 100644 drivers/hwmon/occ/occ_scom_i2c.c
>  create mode 100644 drivers/hwmon/occ/occ_scom_i2c.h
>  create mode 100644 drivers/hwmon/occ/occ_sysfs.c
>  create mode 100644 drivers/hwmon/occ/occ_sysfs.h
>  create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c
>  create mode 100644 drivers/hwmon/occ/scom.h
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web