Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1555856 > unrolled thread

[PATCH v8 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v8 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available Zach Brown <zach.brown@ni.com> - 2017-01-10 20:40 +0100

#1555856 — [PATCH v8 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available

From: Jeff Westfahl <jeff.westfahl@ni.com>

If the user has not set max_beb_per1024 using either the cmdline or
Kconfig options for doing so, use the MTD function 'max_bad_blocks' to
compute the UBI bad_peb_limit.

Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Signed-off-by: Zach Brown <zach.brown@ni.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electron.com>
---
 drivers/mtd/ubi/build.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 85d54f3..3029219 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -584,8 +584,17 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024)
 	int limit, device_pebs;
 	uint64_t device_size;
 
-	if (!max_beb_per1024)
-		return 0;
+	if (!max_beb_per1024) {
+		/*
+		 * Since max_beb_per1024 has not been set by the user in either
+		 * the cmdline or Kconfig, use mtd_max_bad_blocks to set the
+		 * limit if it is supported by the device.
+		 */
+		limit = mtd_max_bad_blocks(ubi->mtd, 0, ubi->mtd->size);
+		if (limit < 0)
+			return 0;
+		return limit;
+	}
 
 	/*
 	 * Here we are using size of the entire flash chip and
-- 
2.7.4

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web