Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1554133 > unrolled thread

RE: [PATCH net 1/2] r8152: fix the sw rx checksum is unavailable

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  RE: [PATCH net 1/2] r8152: fix the sw rx checksum is unavailable Hayes Wang <hayeswang@realtek.com> - 2017-01-09 09:00 +0100

#1554133 — RE: [PATCH net 1/2] r8152: fix the sw rx checksum is unavailable

Ansis Atteka [mailto:aatteka@nicira.com]
> Sent: Tuesday, January 03, 2017 8:41 AM
[...]
> Hayes, in your iperf reproduction environment did you
> 1) connect sender and receiver directly with an Ethernet cable?
> 2) use iperf's TCP mode instead of UDP mode, because I believe that
> with UDP mode packets are more likely to be sparsely distributed?
> Also, this bug is way easier to reproduce when IP fragmentation kicks
> in because IP fragments are typically sent out very close to each
> other.
> 3) were you plugging your USB Ethernet dongle in USB 3.0 port or
> whatever Mark was using? It seems that each USB mode has different
> coalesce parameters and yours might have work "out of box"?

Yes. I connect them directly and use iperf's TCP mode. However,
I test the RTL8152 which only support USB 2.0. Therefore, I don't
think it occurs with different coalesce parameters.

> While I would not call this a proper fix, because it simply reduces
> coalescing timeouts by order of 10X and most likely does not eliminate
> security aspects of the bug, it at least made my system functionally
> stable and I don't see either of those two bugs in my setup anymore:

Do you try commit a59e6d815226 ("r8152: correct the rx early size"),
or you have used it?

Best Regards,
Hayes

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web