Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1552386 > unrolled thread
| Started by | David Lechner <david@lechnology.com> |
|---|---|
| First post | 2017-01-06 00:00 +0100 |
| Last post | 2017-01-06 10:10 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH 1/2] ARM: dts: da850: Add usb device node David Lechner <david@lechnology.com> - 2017-01-06 00:00 +0100
Re: [PATCH 1/2] ARM: dts: da850: Add usb device node Axel Haslam <ahaslam@baylibre.com> - 2017-01-06 10:10 +0100
| From | David Lechner <david@lechnology.com> |
|---|---|
| Date | 2017-01-06 00:00 +0100 |
| Subject | Re: [PATCH 1/2] ARM: dts: da850: Add usb device node |
| Message-ID | <sWpaO-Tr-5@gated-at.bofh.it> |
Hi Sekhar,
On 11/21/2016 10:59 AM, Axel Haslam wrote:
> Add the usb1 device node for the da850 soc.
> This will allow boards to use the usb1 port
> when booting through DT.
>
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 1bb1f6d..fbd50d6 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -406,6 +406,14 @@
> >;
> status = "disabled";
> };
> + usb1: usb@225000 {
> + compatible = "ti,da830-ohci";
> + reg = <0x225000 0x1000>;
> + interrupts = <59>;
> + phys = <&usb_phy 1>;
> + phy-names = "usb-phy";
> + status = "disabled";
> + };
> gpio: gpio@226000 {
> compatible = "ti,dm6441-gpio";
> gpio-controller;
>
This patch can be pickup up now. I have just tested with next-20171015 +
linux-davinci/master.
[toc] | [next] | [standalone]
| From | Axel Haslam <ahaslam@baylibre.com> |
|---|---|
| Date | 2017-01-06 10:10 +0100 |
| Message-ID | <sWyH7-82e-7@gated-at.bofh.it> |
| In reply to | #1552386 |
On Thu, Jan 5, 2017 at 11:49 PM, David Lechner <david@lechnology.com> wrote:
> Hi Sekhar,
>
> On 11/21/2016 10:59 AM, Axel Haslam wrote:
>>
>> Add the usb1 device node for the da850 soc.
>> This will allow boards to use the usb1 port
>> when booting through DT.
>>
>> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
>> ---
>> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 1bb1f6d..fbd50d6 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -406,6 +406,14 @@
>> >;
>> status = "disabled";
>> };
>> + usb1: usb@225000 {
>> + compatible = "ti,da830-ohci";
>> + reg = <0x225000 0x1000>;
>> + interrupts = <59>;
>> + phys = <&usb_phy 1>;
>> + phy-names = "usb-phy";
>> + status = "disabled";
>> + };
>> gpio: gpio@226000 {
>> compatible = "ti,dm6441-gpio";
>> gpio-controller;
>>
>
>
> This patch can be pickup up now. I have just tested with next-20171015 +
> linux-davinci/master.
Yes, the regulator patches, are not actually needed for the lcdk, since
it does not have the over current pin connected to a gpio.
ill resend v2 removing the phy from the dts so that they can be both
applied.
-Axel.
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web