Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1552712 > unrolled thread
| Started by | Andi Shyti <andi.shyti@samsung.com> |
|---|---|
| First post | 2017-01-06 12:50 +0100 |
| Last post | 2017-01-06 14:00 +0100 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Andi Shyti <andi.shyti@samsung.com> - 2017-01-06 12:50 +0100
Re: [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Krzysztof Kozlowski <krzk@kernel.org> - 2017-01-06 13:30 +0100
Re: [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Javier Martinez Canillas <javier@osg.samsung.com> - 2017-01-06 14:00 +0100
| From | Andi Shyti <andi.shyti@samsung.com> |
|---|---|
| Date | 2017-01-06 12:50 +0100 |
| Subject | [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other |
| Message-ID | <sWBbX-1l7-7@gated-at.bofh.it> |
Currently tm2e dts includes tm2 but there are some differences
between the two boards and tm2 has some properties that tm2e
doesn't have.
That's why it's important to keep the two dts files independent
and put all the commonalities in a tm2-common.dtsi file.
At the current status the only two differences between the two
dts files (besides the board name) are ldo31 and ldo38.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 24 +-
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +-------------------
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +-
3 files changed, 56 insertions(+), 1143 deletions(-)
copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%)
rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
similarity index 98%
copy from arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
copy to arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index e8971f4a5977..c43f9a38adf6 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -3,8 +3,8 @@
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
- * Device tree source file for Samsung's TM2 board which is based on
- * Samsung Exynos5433 SoC.
+ * Common device tree source file for Samsung's TM2 and TM2E boards
+ * which are based on Samsung Exynos5433 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -322,7 +322,7 @@
"s2mps13_bt";
};
- regulators {
+ regulators: regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_0.9V_AP";
regulator-min-microvolt = <900000>;
@@ -552,11 +552,10 @@
regulator-max-microvolt = <3300000>;
};
- ldo31_reg: LDO31 {
- regulator-name = "TSP_VDD_1.85V_AP";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
+ /*
+ * LDO31 differs from target to target,
+ * its definition is in the .dts
+ */
ldo32_reg: LDO32 {
regulator-name = "VTOUCH_1.8V_AP";
@@ -595,11 +594,10 @@
regulator-max-microvolt = <1800000>;
};
- ldo38_reg: LDO38 {
- regulator-name = "VCC_3.0V_MOTOR_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
+ /*
+ * LDO38 differs from target to target,
+ * its definition is in the .dts
+ */
ldo39_reg: LDO39 {
regulator-name = "V_HRM_1.8V";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
dissimilarity index 98%
index e8971f4a5977..d30b45a9c0d4 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1,1120 +1,33 @@
-/*
- * SAMSUNG Exynos5433 TM2 board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *
- * Device tree source file for Samsung's TM2 board which is based on
- * Samsung Exynos5433 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos5433.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Samsung TM2 board";
- compatible = "samsung,tm2", "samsung,exynos5433";
-
- aliases {
- gsc0 = &gsc_0;
- gsc1 = &gsc_1;
- gsc2 = &gsc_2;
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_aud;
- pinctrl2 = &pinctrl_cpif;
- pinctrl3 = &pinctrl_ese;
- pinctrl4 = &pinctrl_finger;
- pinctrl5 = &pinctrl_fsys;
- pinctrl6 = &pinctrl_imem;
- pinctrl7 = &pinctrl_nfc;
- pinctrl8 = &pinctrl_peric;
- pinctrl9 = &pinctrl_touch;
- serial0 = &serial_0;
- serial1 = &serial_1;
- serial2 = &serial_2;
- serial3 = &serial_3;
- spi0 = &spi_0;
- spi1 = &spi_1;
- spi2 = &spi_2;
- spi3 = &spi_3;
- spi4 = &spi_4;
- mshc0 = &mshc_0;
- mshc2 = &mshc_2;
- };
-
- chosen {
- stdout-path = &serial_1;
- };
-
- memory@20000000 {
- device_type = "memory";
- reg = <0x0 0x20000000 0x0 0xc0000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "power key";
- debounce-interval = <10>;
- };
-
- volume-up-key {
- gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- label = "volume-up key";
- debounce-interval = <10>;
- };
-
- volume-down-key {
- gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- label = "volume-down key";
- debounce-interval = <10>;
- };
-
- homepage-key {
- gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "homepage key";
- debounce-interval = <10>;
- };
- };
-
- i2c_max98504: i2c-gpio-0 {
- compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- max98504: max98504@31 {
- compatible = "maxim,max98504";
- reg = <0x31>;
- maxim,rx-path = <1>;
- maxim,tx-path = <1>;
- maxim,tx-channel-mask = <3>;
- maxim,tx-channel-source = <2>;
- };
- };
-
- sound {
- compatible = "samsung,tm2-audio";
- audio-codec = <&wm5110>;
- i2s-controller = <&i2s0>;
- audio-amplifier = <&max98504>;
- mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
- model = "wm5110";
- samsung,audio-routing =
- /* Headphone */
- "HP", "HPOUT1L",
- "HP", "HPOUT1R",
-
- /* Speaker */
- "SPK", "SPKOUT",
- "SPKOUT", "HPOUT2L",
- "SPKOUT", "HPOUT2R",
-
- /* Receiver */
- "RCV", "HPOUT3L",
- "RCV", "HPOUT3R";
- status = "okay";
- };
-};
-
-&adc {
- vdd-supply = <&ldo3_reg>;
- status = "okay";
-
- thermistor-ap {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 0>;
- };
-
- thermistor-battery {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 1>;
- #thermal-sensor-cells = <0>;
- };
-
- thermistor-charger {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 2>;
- };
-};
-
-&bus_g2d_400 {
- devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
- vdd-supply = <&buck4_reg>;
- exynos,saturation-ratio = <10>;
- status = "okay";
-};
-
-&bus_g2d_266 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_gscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_hevc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc0 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc1 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc2 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&cmu_aud {
- assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
- assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-};
-
-&cmu_fsys {
- assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
- <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
- <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
- <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
- <&cmu_top CLK_DIV_SCLK_USBDRD30>,
- <&cmu_top CLK_DIV_SCLK_USBHOST30>;
- assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
- <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
- assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
- <66700000>, <66700000>;
-};
-
-&cmu_gscl {
- assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
- <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
- <&cmu_top CLK_ACLK_GSCL_333>;
-};
-
-&cmu_mfc {
- assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
-};
-
-&cmu_mscl {
- assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
- <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
- <&cmu_top CLK_SCLK_JPEG_MSCL>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>;
-};
-
-&cpu0 {
- cpu-supply = <&buck3_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
-&decon {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&dsi {
- status = "okay";
- vddcore-supply = <&ldo6_reg>;
- vddio-supply = <&ldo7_reg>;
- samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- };
- };
- };
-};
-
-&hsi2c_0 {
- status = "okay";
- clock-frequency = <2500000>;
-
- s2mps13-pmic@66 {
- compatible = "samsung,s2mps13-pmic";
- interrupt-parent = <&gpa0>;
- interrupts = <7 IRQ_TYPE_NONE>;
- reg = <0x66>;
- samsung,s2mps11-wrstbi-ground;
-
- s2mps13_osc: clocks {
- compatible = "samsung,s2mps13-clk";
- #clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_0.9V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD1_E_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD10_MIF_PLL_1.0V_AP";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD10_DPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MIPI2L_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD18_MIPI2L_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD18_LLI_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD18_ABB_ETC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD33_USB30_3.0V_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_INT_M_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_KFC_M_1.1V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDD_G3D_M_0.95V_AP";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDDQ_M1_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDDQ_M2_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDDQ_EFUSE";
- regulator-min-microvolt = <1400000>;
- regulator-max-microvolt = <3400000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "V_TFLASH_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "V_CODEC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "VDDA_1.8V_COMP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "VCC_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "CAM_IO_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "CAM_SEN_CORE_1.05V_AP";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "VT_CAM_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "UNUSED_LDO25";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-off;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "CAM_AF_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "VCC_3.0V_LCD_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "VCC_1.8V_LCD_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "VT_CAM_2.8V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo30_reg: LDO30 {
- regulator-name = "TSP_AVDD_3.3V_AP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "TSP_VDD_1.85V_AP";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "VTOUCH_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "VTOUCH_LED_3.3V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- };
-
- ldo34_reg: LDO34 {
- regulator-name = "VCC_1.8V_MHL_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <2100000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "OIS_VM_2.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo36_reg: LDO36 {
- regulator-name = "VSIL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo37_reg: LDO37 {
- regulator-name = "VF_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "VCC_3.0V_MOTOR_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo39_reg: LDO39 {
- regulator-name = "V_HRM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo40_reg: LDO40 {
- regulator-name = "V_HRM_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VDD_EGL_1.0V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VDD_KFC_1.0V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "VDD_INT_0.95V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_DISP_CAM0_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "VDD_G3D_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VDD_MEM1_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VDD_LLDO_1.35V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_MLDO_2.0V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_mem2";
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&hsi2c_8 {
- status = "okay";
-
- max77843@66 {
- compatible = "maxim,max77843";
- interrupt-parent = <&gpa1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x66>;
-
- muic: max77843-muic {
- compatible = "maxim,max77843-muic";
- };
-
- regulators {
- compatible = "maxim,max77843-regulator";
- safeout1_reg: SAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- safeout2_reg: SAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- charger_reg: CHARGER {
- regulator-name = "CHARGER";
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <3150000>;
- };
- };
-
- haptic: max77843-haptic {
- compatible = "maxim,max77843-haptic";
- haptic-supply = <&ldo38_reg>;
- pwms = <&pwm 0 33670 0>;
- pwm-names = "haptic";
- };
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mshc_0 {
- status = "okay";
- num-slots = <1>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 3>;
- samsung,read-strobe-delay = <90>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
- bus-width = <8>;
- assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
- assigned-clock-rates = <800000000>;
-};
-
-&mshc_2 {
- status = "okay";
- num-slots = <1>;
- cap-sd-highspeed;
- disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
-};
-
-&ppmu_d0_general {
- status = "okay";
- events {
- ppmu_event0_d0_general: ppmu-event0-d0-general {
- event-name = "ppmu-event0-d0-general";
- };
- };
-};
-
-&ppmu_d1_general {
- status = "okay";
- events {
- ppmu_event0_d1_general: ppmu-event0-d1-general {
- event-name = "ppmu-event0-d1-general";
- };
- };
-};
-
-&pinctrl_alive {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_alive>;
-
- initial_alive: initial-state {
- PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-1, NONE, FAST_SR1);
- PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-3, NONE, FAST_SR1);
- PIN(INPUT, gpa0-4, NONE, FAST_SR1);
- PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-6, NONE, FAST_SR1);
- PIN(INPUT, gpa0-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa1-0, UP, FAST_SR1);
- PIN(INPUT, gpa1-1, NONE, FAST_SR1);
- PIN(INPUT, gpa1-2, NONE, FAST_SR1);
- PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
- PIN(INPUT, gpa1-5, NONE, FAST_SR1);
- PIN(INPUT, gpa1-6, NONE, FAST_SR1);
- PIN(INPUT, gpa1-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa2-0, NONE, FAST_SR1);
- PIN(INPUT, gpa2-1, NONE, FAST_SR1);
- PIN(INPUT, gpa2-2, NONE, FAST_SR1);
- PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-4, NONE, FAST_SR1);
- PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-2, NONE, FAST_SR1);
- PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-4, NONE, FAST_SR1);
- PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf1-0, NONE, FAST_SR1);
- PIN(INPUT, gpf1-1, NONE, FAST_SR1);
- PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf1-4, UP, FAST_SR1);
- PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
- PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf3-2, NONE, FAST_SR1);
- PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
- PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
- PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
- };
-
- te_irq: te_irq {
- samsung,pins = "gpf1-3";
- samsung,pin-function = <0xf>;
- };
-};
-
-&pinctrl_cpif {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_cpif>;
-
- initial_cpif: initial-state {
- PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
- PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
- };
-};
-
-&pinctrl_ese {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_ese>;
-
- initial_ese: initial-state {
- PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
- PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
- PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
- };
-};
-
-&pinctrl_fsys {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_fsys>;
-
- initial_fsys: initial-state {
- PIN(INPUT, gpr3-0, NONE, FAST_SR1);
- PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-7, NONE, FAST_SR1);
- };
-};
-
-&pinctrl_imem {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_imem>;
-
- initial_imem: initial-state {
- PIN(INPUT, gpf0-0, UP, FAST_SR1);
- PIN(INPUT, gpf0-1, UP, FAST_SR1);
- PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-3, UP, FAST_SR1);
- PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-5, NONE, FAST_SR1);
- PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-7, UP, FAST_SR1);
- };
-};
-
-&pinctrl_nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_nfc>;
-
- initial_nfc: initial-state {
- PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
- };
-};
-
-&pinctrl_peric {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_peric>;
-
- initial_peric: initial-state {
- PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-2, NONE, FAST_SR1);
- PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
-
- PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
-
- PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
- PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
-
- PIN(INPUT, gpc3-4, NONE, FAST_SR1);
- PIN(INPUT, gpc3-5, NONE, FAST_SR1);
- PIN(INPUT, gpc3-6, NONE, FAST_SR1);
- PIN(INPUT, gpc3-7, NONE, FAST_SR1);
-
- PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
- PIN(2, gpg0-1, DOWN, FAST_SR1);
-
- PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
-
- PIN(INPUT, gpd4-0, NONE, FAST_SR1);
- PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
-
- PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
-
- PIN(INPUT, gpd8-1, UP, FAST_SR1);
-
- PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
-
- PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
-
- PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
- };
-};
-
-&pinctrl_touch {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_touch>;
-
- initial_touch: initial-state {
- PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
- };
-};
-
-&pwm {
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&mic {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&pmu_system_controller {
- assigned-clocks = <&pmu_system_controller 0>;
- assigned-clock-parents = <&xxti>;
-};
-
-&serial_1 {
- status = "okay";
-};
-
-&spi_1 {
- cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- wm5110: wm5110-codec@0 {
- compatible = "wlf,wm5110";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
- interrupt-parent = <&gpa0>;
- interrupts = <4 IRQ_TYPE_NONE>;
- clocks = <&pmu_system_controller 0>,
- <&s2mps13_osc S2MPS11_CLK_BT>;
- clock-names = "mclk1", "mclk2";
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,micd-detect-debounce = <300>;
- wlf,micd-bias-start-time = <0x1>;
- wlf,micd-rate = <0x7>;
- wlf,micd-dbtime = <0x1>;
- wlf,micd-force-micbias;
- wlf,micd-configs = <0x0 1 0>;
- wlf,hpdet-channel = <1>;
- wlf,gpsw = <0x1>;
- wlf,inmode = <2 0 2 0>;
-
- wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
- wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
-
- /* core supplies */
- AVDD-supply = <&ldo18_reg>;
- DBVDD1-supply = <&ldo18_reg>;
- CPVDD-supply = <&ldo18_reg>;
- DBVDD2-supply = <&ldo18_reg>;
- DBVDD3-supply = <&ldo18_reg>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
- };
-};
-
-&timer {
- clock-frequency = <24000000>;
-};
-
-&tmu_atlas0 {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_apollo {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_g3d {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&usbdrd30 {
- vdd33-supply = <&ldo10_reg>;
- vdd10-supply = <&ldo6_reg>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&usbdrd30_phy {
- vbus-supply = <&safeout1_reg>;
- status = "okay";
-};
-
-&xxti {
- clock-frequency = <24000000>;
-};
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+ model = "Samsung TM2E board";
+ compatible = "samsung,tm2e", "samsung,exynos5433";
+};
+
+®ulators {
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 854c583092d5..53e361f61ad5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -11,21 +11,23 @@
* published by the Free Software Foundation.
*/
-#include "exynos5433-tm2.dts"
+#include "exynos5433-tm2-common.dtsi"
/ {
model = "Samsung TM2E board";
compatible = "samsung,tm2e", "samsung,exynos5433";
};
-&ldo31_reg {
- regulator-name = "TSP_VDD_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-};
+®ulators {
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
-&ldo38_reg {
- regulator-name = "VCC_3.3V_MOTOR_AP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.3V_MOTOR_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
--
2.11.0
[toc] | [next] | [standalone]
| From | Krzysztof Kozlowski <krzk@kernel.org> |
|---|---|
| Date | 2017-01-06 13:30 +0100 |
| Subject | Re: [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other |
| Message-ID | <sWBOG-1Ry-21@gated-at.bofh.it> |
| In reply to | #1552712 |
On Fri, Jan 06, 2017 at 08:41:11PM +0900, Andi Shyti wrote:
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> At the current status the only two differences between the two
> dts files (besides the board name) are ldo31 and ldo38.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
> ...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 24 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +-
> 3 files changed, 56 insertions(+), 1143 deletions(-)
> copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%)
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> similarity index 98%
> copy from arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> copy to arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index e8971f4a5977..c43f9a38adf6 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
Thanks. Now I can easily see the differences... and there are
differences! This is much, much easier to review then all previous
versions.
> @@ -3,8 +3,8 @@
> *
> * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> *
> - * Device tree source file for Samsung's TM2 board which is based on
> - * Samsung Exynos5433 SoC.
> + * Common device tree source file for Samsung's TM2 and TM2E boards
> + * which are based on Samsung Exynos5433 SoC.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -322,7 +322,7 @@
> "s2mps13_bt";
> };
>
> - regulators {
> + regulators: regulators {
I understand that you added the label to create LDO31 and LDO38
regulators in specific DTS (I read your comments below). I do not have
strong opinion but I would prefer overriding in DTS instead of new addon, so:
1. without the label above,
2. with something like:
ldo31_reg: LDO31 {
/*
* LDO31 differs from target to target,
* its definition is in the .dts
*/
};
With such empty stub, one can still find all the regulator nodes in
common DTSI. I find it more readable. What do you think?
Best regards,
Krzysztof
> ldo1_reg: LDO1 {
> regulator-name = "VDD_ALIVE_0.9V_AP";
> regulator-min-microvolt = <900000>;
> @@ -552,11 +552,10 @@
> regulator-max-microvolt = <3300000>;
> };
>
> - ldo31_reg: LDO31 {
> - regulator-name = "TSP_VDD_1.85V_AP";
> - regulator-min-microvolt = <1850000>;
> - regulator-max-microvolt = <1850000>;
> - };
> + /*
> + * LDO31 differs from target to target,
> + * its definition is in the .dts
> + */
>
> ldo32_reg: LDO32 {
> regulator-name = "VTOUCH_1.8V_AP";
> @@ -595,11 +594,10 @@
> regulator-max-microvolt = <1800000>;
> };
>
> - ldo38_reg: LDO38 {
> - regulator-name = "VCC_3.0V_MOTOR_AP";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - };
> + /*
> + * LDO38 differs from target to target,
> + * its definition is in the .dts
> + */
>
> ldo39_reg: LDO39 {
> regulator-name = "V_HRM_1.8V";
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| Date | 2017-01-06 14:00 +0100 |
| Subject | Re: [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other |
| Message-ID | <sWChH-24g-23@gated-at.bofh.it> |
| In reply to | #1552712 |
Hello Andi,
On 01/06/2017 08:41 AM, Andi Shyti wrote:
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> At the current status the only two differences between the two
> dts files (besides the board name) are ldo31 and ldo38.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
Patch looks good to me.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
I've some comments though:
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> dissimilarity index 98%
> index e8971f4a5977..d30b45a9c0d4 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -1,1120 +1,33 @@
[snip]
> -
> -/ {
> - model = "Samsung TM2 board";
> - compatible = "samsung,tm2", "samsung,exynos5433";
> -
[snip]
> +
> +/ {
> + model = "Samsung TM2E board";
> + compatible = "samsung,tm2e", "samsung,exynos5433";
> +};
> +
You ended with the wrong model and compatible for TM2.
Speaking about these, I noticed that the common .dtsi has the TM2 model and
compatible. I think those don't belong to .dtsi files and instead should be
defined on each .dts file.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web