Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1550779 > unrolled thread
| Started by | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
|---|---|
| First post | 2017-01-04 14:40 +0100 |
| Last post | 2017-01-09 10:00 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 2/4] ARM: dts: sd-600eval: add hdmi support Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - 2017-01-04 14:40 +0100
Re: [PATCH 2/4] ARM: dts: sd-600eval: add hdmi support Archit Taneja <architt@codeaurora.org> - 2017-01-09 10:00 +0100
| From | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
|---|---|
| Date | 2017-01-04 14:40 +0100 |
| Subject | [PATCH 2/4] ARM: dts: sd-600eval: add hdmi support |
| Message-ID | <sVTXj-5hJ-17@gated-at.bofh.it> |
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index 39ae2bc..4e908af 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -39,6 +39,17 @@
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
soc {
rpm@108000 {
regulators {
@@ -347,5 +358,38 @@
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
+
+ hdmi-tx@4a00000 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hdmi-mux-supply = <&vcc3v3>;
+
+ hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+ hdmi-phy@4a00400 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ };
+
+ mdp@5100000 {
+ status = "okay";
+
+ ports {
+ port@3 {
+ endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
};
};
--
2.10.1
[toc] | [next] | [standalone]
| From | Archit Taneja <architt@codeaurora.org> |
|---|---|
| Date | 2017-01-09 10:00 +0100 |
| Message-ID | <sXDY6-1SO-9@gated-at.bofh.it> |
| In reply to | #1550779 |
On 01/04/2017 07:04 PM, Srinivas Kandagatla wrote:
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
> ---
> .../arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> index 39ae2bc..4e908af 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> @@ -39,6 +39,17 @@
>
> };
>
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&hdmi_out>;
> + };
> + };
> + };
> +
> soc {
> rpm@108000 {
> regulators {
> @@ -347,5 +358,38 @@
> cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + hdmi-tx@4a00000 {
> + status = "okay";
> + core-vdda-supply = <&pm8921_hdmi_switch>;
> + hdmi-mux-supply = <&vcc3v3>;
> +
> + hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + port@1 {
> + endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> + };
> +
> + hdmi-phy@4a00400 {
> + status = "okay";
> + core-vdda-supply = <&pm8921_hdmi_switch>;
> + };
> +
> + mdp@5100000 {
> + status = "okay";
> +
> + ports {
> + port@3 {
> + endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> };
> };
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web